Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

2018 Tiguan will not start

2018 VW Tiguan, STD-Key, Not digital cluster, AT EVO-ALL firmware 64.06 THAR-VW6 Decrypted and programmed successfully, but when trying to remote start via lock lock lock from oem key, car turns on, but doesn't crank. Tested while in the car and the depress break light (shift lock) was still illuminated. I wired in the Yellow/Red Break Out to Black/Red VESCM (+)Foot Break correctly. Tested command start while in the car and depressing the break, works. Please assist.

0

Fortin Evo-ALL will not program

2018 VW Tiguan Standard Key, Automatic Trans, no Heated steering wheel I have the THAR-VW6 installed correctly. The EVO-ALL will not program. When trying to program, I hold down the programming button and connect the data link cable, light goes to blue, I release, all 3 light flash. I have an R-link and a Flashlink. I've flashed the EVO-ALL with the correct firmware. Service# 001A07 367521 Please help.

0

2016 Nissan Altima PCM humming sound and park lights staying on

Installed compustar alarm with remote start using a EVO-NIST4 and diagram75491, d2d cable being used. For some reason the PCM is humming and the park lights are on, what can be the issue? Do I change out the power wire fuse to a 1 amp since it comes with a 30 but I am not using those, just the D2D as the diagram says.

0

2019 Honda HRV, What settings do I have to enable for EVO ONE RM942 for the antenna to power up and learn Fobs?

I Installed the EVO ONE RM942 with Hon8 T-Harness. Three lock on factory fob works remote start function but when I do learn procedure in RFK 942 manual antenna doesn't light up. Tried with turning the key on and off and brake pedal as well as with the valet switch but neither excites the antenna power. Guessing I just didn't toggle the right setting when programming the EVO ONE but couldn't find anything else in the instructions.

25/10/2024

Honda Daze (150Pts.)

0

13 honda accord push to start. Won't OEM remote start, automatic transmission

3x lock module shows blue light response to inputs from OEM key, electrical click and nothing. module shows yellow light when running started normally. Thar-one-hon3, Evo One. Firmware 73.30, function 38:2 is on. Unit option C1, D2 and D6 are on, Yellow loop wire is cut on module SN: 002B04680114

0

EVO One with THAR-GM1 V2 in 2016 Chevy Cruze Limited Manual Transmission

Hello all, I am getting ready to install an EVO One Module as a remote starter only, with a THAR-GM1 V.2 Harness in my 2016 Chevy Cruze Limited, with Flip Key and manual transmission. The wiring diagram only shows the Pink wire from the High Power (6 Wire) Harness being used. Does that mean I don't have to hookup the other 5 High Power Wires, or are they required for the unit to function? I haven't been able to find any wiring schematic for where the wires (aside from power and ground) hook up in my car. I guess I am unlcear on whether or not the GM Harness renders those other 5 wires unnecessary. Thank you in advance.

0

EVO-ALL will no longer go into Solid Blue Key programming mode after programming button is released?

After an almost successful key programming where the Decryptor completed successfully with the EVO-ALL, Unfortunately, I did not replace the R-LINK with the TB-VW first before I reconnected the EVO-ALL. When I replaced it after it did not successfully start and gave 5 Red Flashes/Beeps. So I am trying to start over at key programming step 1. When the programming button on the EVO-ALL is released on the Blue LED flash, the Blue LED just goes out instead of staying ON solid. After reconnecting the remaining connectors to the EVO-ALL and pressing start button the yellow LED comes on. It seems like the EVO-ALL is damaged if it will not go into key programming mode or perhaps the RLINK is no longer functioning, This is not a wiring problem since key programming worked the first time. I have no way forward can someone please help?

11/10/2024

Mazda Rayek (130Pts.)

0

Harnais vient avec ou non ?

Je serait interessé d"acheter un kit evo one pour un mazda cx-5 mais je ne sait pas si le t harness vient avec le kit ou si je doit me le procuré a part car ce dernier nest pas achetable directement sur votre site

0

Does CHRT7 require any splicing or tapping for a 2024 Ram?

Considering buying a CHRT7 or CHRT6 for my 2024 Ramy 1500 Rebel with OEM remote start and keyless entry. I looked at the install guide, but its not quiet clear whether it requires splicing/tapping into any wires. (especially the parking lights, ignition, CAN low and High). Thanks

0

Steering column harness

Hello,

2023-2024 Toyota Camry

Push to start - gas engine

I am trying to install Fortin Evo all with Toy-13 harness. However, I can't find steering column plugs. It could be not equipped with steering column lock. What to do with these plugs? Does it function correctly without connecting these plugs?

0

2022 Toyota Tundra has a cruise control malfunction message on the dash after install.

This vehicle has an EVO one with a toy16 installed.

0

THAR-TOY13 harnese

Please help I have 2022 Toyota Corolla LE push start was installed with THAR-TOY13 harness and I would like to know which colour wire for the horn from T- harness & wire colour output from Evo one also, because I would like to add shock sensor for oem car alarm. Thank you & have a great day.

0

Chevrolet spark 2020 push to start remote not responding to remote start

The Evo all-GM6 device was installed and programmed, but the remote that was programmed in the steps does not start the car with remote start, and the remote start only works with the other remote

0

Evo ONE with CARLINK ASCL6 and T harness in a 2022 tundra locks not working via app

Everything programmed and working minus the locks via the CARLINK app. The parking lights flash and mirrors start to fold in during lock but nothing from the lock. Several ofthers are having the same exact issue Any help would be awesome. Thanks -B

0

PIN Terminal Standards on Fortin T-Harness

Does anyone know what standard pin terminals are used on Fortin T-Harnesses? I was removing a connection at the Evo module and pulled two wires out of the connector. I need to replace the terminals but have no idea the Standard that is used on the connectors. I'd like to purchase terminals to correct the issue. Thank you everyone!

0

2015 Silverado work truck with no fobs. Can i add a remote start with fortin remotes?

0

Evo Start LTE with Fortin Evo All & 2022 RAM 1500!

Dear all, Can someone please share with me what are the 2022 or newers RAM 1500 Evo Start LTE functions are operational? For me I cannot get the Gas guage, roll windows, open trunk or use panic options and I wonder if that is a firmaware update or some other programming issues! Please advise.

0

how much parisitic drain does the EVO-START LTE add to Evo All or Evo One and does it goe into sleep mode to minimize it

2019 gmc savana 2500 standard key

0

EVO-ONE: car starts, then stops, hazard lights flash 3x, then starts, then stops finally

Hey everyone! I'm using an EVO-ONE with T-Harness for the 2020 Kia Sorento PTS. When I do the 3x lock, the car turns on, then stops after a few seconds, flashes the hazard lights 3x, then turns back on, then stops after a few seconds with no hazard lights flashing. Any help would be great, thanks!

0

2015 Silverado work truck with no fobs. Can i add a remote start with fortin remotes?

0

Trying to add RF kit RK441 to EVO ALL 2015 Infiniti Q50

Trying to add RF kit RFK441 to my remote start using EVO ALL and T harness. I flashed it and the remote start is working great using OEM remote. I have the option selected for RF Kit -Fortin 2. I setup EVO ALL to receive the RF kit programming and the red, yellow and blue stay solid during the process and dont flash after pressing the program button listed on instructions. The antenna blink once when I press buttons to program it, but the car doesnt respond to key presses on the RF remote. Any suggestions? 2015 Infiniti Q50, push button start.

0

Wire colors for passlock for 2008 Chevy Impala

23/03/2024

Subaru Jim (850Pts.)

0

2015 Subaru Legacy STD key alarms when opening door after unlock with key fob but not with smart-phone module unlock.

I have a 2015 Subaru Legacy that I have install an EVO-ONE (002B07172969) on with the T-Harness and have an issue with the car alarming when the door is opened after unlocking it with the key fob. If I use the smart-phone module to unlock the car, no alarm sounds when the door is opened. If I disable the alarm feature (change from option 14.2 to 14.1) everything works fine. Any ideas? On another note, the troubleshooting app for android does not exist on the Google Play Store.

0

2023 Camry Push to Start

I have an Evo-All module flashed for a 2020 Camry, but have a 2023 Camry. I need a new wiring Harness. Would I need the Toy-16 harness. Also would the module being flashed for 2020 and not 2023 work? Thank you

0

evo-one-nis5

Bought from a ebay seller selling your stuff. I contacted them an they said plug and play so i bought. Well i got it hooked it up tried to program and i get yellow light on and turn key and the red light dont come on to program. I did hook it up to my computer with the flah device and programmed it and flashed it. Still nothing. Ebay seller has been giving me a run around saying its your problem not theres. I just need some troublshooring help toi get it to work. The ebay seller then told me i needed a rf so i got one of them from them and re flashed the device for it installed it back in and still does nothing. Whats best way to get help troublshooting

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue