Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

EVO-ONE: car starts, then stops, hazard lights flash 3x, then starts, then stops finally

Hey everyone! I'm using an EVO-ONE with T-Harness for the 2020 Kia Sorento PTS. When I do the 3x lock, the car turns on, then stops after a few seconds, flashes the hazard lights 3x, then turns back on, then stops after a few seconds with no hazard lights flashing. Any help would be great, thanks!

0

is there a t-harness for a 2012 kia sorento push-to-start to evo-one?

looking for a t-harness for a 2012 kia soerneto push-to-start to evo-one

26/10/2023

Kia jfehr (130Pts.)

0

Tach sensor 2009 Kia Spectra

2009 Kia Spectra. THAR-ONE-KHY1. I need to know which wire to connect the tach signal to. Yes, in the Wire Colour diagram it does tell me which wire on the ECM, but no-where can I find which wire on the EVO-one it must be connected to. I have by-passed it currently using programmable option 20.2, but the start quality is pathetic; in cold temperatures it requires more crank time, causing excessive starter drag in warmer conditions. Adjust for warm temperatures and the crank is in-sufficient for the cold mornings. Advice for me?

0

INSTRUCTIONS FOR KIA CEED

Do you have a Evo-All manual for a 2011 Kia Ceed?

0

2009 Kia Optima - EVO-ONE - Unable to acquire Can Bus data - Blue LED does not flash

2009 Kia Optima w/ Standard Key. EVO-ONE with T-Harness and latest Firmware. No PATS (No Immobilizer). Using Guide #60931 and Program #2 (Vehicle without PATS data wire). I've tried everything, and cannot acquire the Can Bus data. Blue LED goes off instead of flashing rapidly when key is turned to the on/run position, and comes back on solid when the key is turn off. I've double and triple-checked all wiring. All connections are soldered and pass continuity checks. Yellow wire (A1) is connected to Pink wire (E5) on the T-Harness as shown in the Wiring Guide. OBD-II connector Pin 6 (White wire) is connected to Gray wire (C3) and measures 2.7 VDC. OBD-II connector Pin 14 (Black wire) is connected to Grey/Black wire (C4) and measures 2.3 VDC. I reversed the connections to C3 and C4 with the same results: No flashing Blue LED. Can anyone provide some guidance on what else to do to get this working? Thank you.

0

Is a T-harness available for the 2019 Kia Singer

Is a T-harness available for the 2019 Kia Singer gt1

0

2018 kia sorento push start whicu device evo with T-harness should i buy include & lexus ls430 2006

0

Car wont start when trying to use remote starter. Flashes 4 times after shutdown.

Hi, I have a 2011 Kia Forte. Evo-One with T-Harness, automatic.

https://cdn02.fortin.ca/download/60911/evo-one_ig_thr_bi_hyu1-kia-forte_2010-2013_key_a_60911.pdf

 

I installed everything and programmed the module and the key and it went fine. Client doesnt have an oem remote. I tried to remote start and parking lights come on and then car shuts off. Parking lights flash 4 times after shutdown (does that mean I have to check the tach?). I did try the option 20, mode 2 for tachless and still nothing. Also the remotes wont lock or unlock.. 

Which wire do I have to verify? the can? Theres not much wiring on this car.

 

 

0

When will a T-Harness be avaiable for a 2016 Kia Sorento?

Just wondering if a T harness will be made for the 2016, 2017 Kia Sorento.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue