Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

02/01/2023

Kia ryk (220Pts.)

1

2013 kia soul Evo-All push-to-start; no CAN bus LED on lock?

Installed an Evo-All on a 2013 Kia Soul. The 3x lock sequence isn't starting the vehicle. Updated firmware to 76.31. Checked the 3x lock sequence in Flashlink Manager and the push-to-start option is turned on. Programming to vehicle seemed to complete OK, but instead of a quickly flashing blue LED, I have a quickly flashing blue with a solid red. I also get no indication of fob lock on the blue led. It does fast flash twice when unlocking the car but no response on locking. I do get the yellow LED when ignition is turned on from the PTS button. All manual functions seem ok, just no remote response. Also, I understood that the fob buttons wouldn't function after a remote start but does that include the proximity functions? With the engine started, I can't open the locked doors using the outside door handle buttons (detects fob nearby). Only way to enter the vehicle with the engine running is using a manual key. Kinda kills the logic behind installing a remote start system. ================= Corrected swapped CAN wires at obd connector, now unit seems to program fine. No red led on completion, just rapid flashing blue led. But still no response from unit with 3x lock. Blue led still doesn't give any flash upon lock signal but does flash twice on unlock. Troubleshooting guide says to ground GWR and try to start with and without brake pedal. That all seems to work normally. Double checked brake wire (white/red) for 12v when brake pressed and 12v feed (white/blue) and both wires are connected correctly, voltages OK. Tried grounding purple wire (external lock control) 3x also. No response from unit either manually or with fob. =============== Ok, just got off the phone with tech support. My wiring is ok, grounding yellow/black wire will start the car, just no detection of lock signal from key fob. TS let me know that this car will need an RF kit to operate, there is no way to detect the lock signal. That means a completely new fob and functions, not an option here. I wouldn't recommend this kit for this Kia Soul. Does anyone know if i can use this Evo-All with another vehicle? Can I reflash it for something else?....or am I just stuck with this $100 brick?

0

Does the evo-all come with everything needed for complete installation

Does the Evo-All come with everything you need for a full installtion? DO I need to purchase seperate remote and antenna?

0

T-HARNESS

Do you have T-harness for a 2011 KIA Cee'd (EURO), for an Evo All?

0

WIRING FOR KIA CEED

As anyone insttaled a Evo-All on a KIA Cee'd?

0

INSTRUCTIONS FOR KIA CEED

Do you have a Evo-All manual for a 2011 Kia Ceed?

0

Evo-All Door Lock Control 2014 Kia Cadenza Push-to-Start

Guide #11931 (REV.: 20210525) only indicates that Alarm arm & Alarm disarm being supported features will the recommended Firmware also actuate the door-locks?

0

Evo all wiring for mycar

I bought the evo all it came with the t harness and the cool start crimestopper and I bought the my car rf smart phone with it but it don't seem like no one can help you out I seen all the YouTube videos and I look it all up but it's no help I can get it to start the car if I get the lock button 3 x on the keys but when I go in the the system and program it to work with my phone I can unlock the doors and lock them but when I go and hit the start button on the phone on the evo all it will flash my parking lights and the red light will light up and it will not start the car am I missing something can someone please help me out

0

EVO-ALL or EVO-ONE for a 2016 Kia Soul Standard Key?

From doing a little research it seems that the EVO-ALL does not have the remote start? Thanks for any help.

0

Cant program '15 Kia Optima PTS

I have everything wired on my '15 KIA Optima Push to Start. When i go to program i get to the step where i push the button 7 times. The red LED never flashes 10 times and the blue never comes on after. When I hard wired CAN1 CAN2 wires, the wire diagram shows it connected to a wire in a harness in the driver side kick plate. But there are 2 wires in each pin in the harness. (2 white/orange wires, 2 white wires). DO i have to splice to BOTH of the wires in each pin placement? Or will connected to only 1 work? This is the only thing i can thing of why i can not get mine to program.

0

What connection do I make to the pink starter wire with EVO-ALL module only. ie. No data link.

What connection do I make to the pink starter wire with EVO-ALL module only if I am not using a data link kit. 2016 Kia Sorento Push to Start

0

vehicle does not remote start.

I installed evo all in Kia Sorento SXL but after pressing 3 time to remote start, The red light come on on the Evo all, the door on lock, the welcome screen on the instrument cluster come up and the off but the vehicle does not start.

0

Evo-ALL remote starter on box

I bought a EVO-ALL for my gf's 2019 Niro push-to-start a few months ago. It says on the box that it can remote start with the OEM key. However it doesn't say it on the picture on your website, it's only on the EVO-ONE now. Do I follow the instructions for the ALL? Will de remote starter work?

23/02/2020

Kia Mike M (9800Pts.)

0

Getting brake on error with evo all and compustar cm900.

I installed a compustar cm920 with a Evo all using datalink cable on a 2019 kia Sorrento key start vehicle and it will work fine but randomly not start using remote start and I get an error code from the parking lights saying foot brake on. This is strange because it's all thru data and it will only happen once every 10 times or so. I have a options A1-A11, C1, F2 on. The vehicle does NOT have an immobilizer. Programmed using just the blue light for CAN and programming went fine. Not sure what would cause this.

18/02/2020