Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Dcryptor limit reached while programming

hi i was programmig my newly bought EVO-VWT3 system, and both times programming it would stuck on yellow and red flashing... now i have reached the dcryptor limit... can we reset this please, SN: 001A07 367315

09/11/2024

Lexus G M (14840Pts.)

0

2017 LS460

Hello. 2017 LS460 not on the list?

0

EVO One RFK441 2010 Hyundai Tuscon, regular key. Remotes only work every so often.

Everything programmed correctly as per the guide, no issues there. The remotes, even though they are one way, seem like they are acting as a 2 way remote. Both remotes programmed correctly on initial setup. Sometimes one of the remotes will work correctly to lock and unlock the doors, the LED on the remote giving one initial flash, then 5 quick flashes and the function works on the car. Other times, you push the lock or unlock, and all you get is a single flash, and no response from the car. It is very random, sometimes it's one remote, sometimes it's the other. Sometimes when I pick up one of the remotes, I see the LED give a single flash, but I haven't pushed a button. After a period of time, they both seem to start working properly to lock and unlock the car. Once that happens, you can remote start it once. Sometimes you can shut it down with the remote, sometimes you cannot. After that, neither one of the remotes will work at all. They go back to a single LED flash when the lock or unlock is pressed. Eventually one of them will start to work, then the other.........This has to be the strangest behavior I've seen from an RF remote.

0

2016 Nissan Altima PCM humming sound and park lights staying on

Installed compustar alarm with remote start using a EVO-NIST4 and diagram75491, d2d cable being used. For some reason the PCM is humming and the park lights are on, what can be the issue? Do I change out the power wire fuse to a 1 amp since it comes with a 30 but I am not using those, just the D2D as the diagram says.

0

Chrysler Pacifica & int-sl+ problem

Hello! I have a few questions about installing int-sl+ in Chrysler Pacifica 2004. 1. Should I do step 5 when programming if I don't use data link? (hardwire connection) 2. What does the note "Can be proggrammed 5 times max." mean in the instructions (at step 7) and what happens after more 5 attempts on the same machine? 3. In programming process on step 7 the LED flash a few times and turn off. I think the interface is programming. The engine is running by remote start, but stopping after 1-2 seconds. The immobilizer LED flashes, indicating that the key is missing. The diode on the INT-SL+ is constantly off at startup. If i put the key near barrel, the engine running correctly without stopping. What do i incorrectly ?

0

2012 Infiniti EX35 Heater Not Blowing Hot Air

I have Linkr LTX LT3 paired with Evo All NIST1, everything is connected correct vehicle starts with 3x lock or using App. My question is where in the flash settings do I got to enable heater to work. Because when starting the car all i get is air but heater not working until i press the brake pedal then you can feel hot air coming. Please advise thanks!

05/11/2024

Skoda G M (14840Pts.)

0

Function D2

Hello. I installed evo-all on a 2022 Skoda Superb... (I specified a 2021 Golf... I connected the CAN under the steering wheel, orange-green and orange-brown... the start-stop wires were blue and purple) I did not enable the D2 function... After all, we still open it with remote start... Lock-Unlock-Lock... It is possible not to turn it on, right?

03/11/2024

Nissan Tu Le (390Pts.)

0

what is the option to set for the car to locked and shutoff the parking lights after the remote start timeout (15mins).

Vehicle: 2018 Nissan Rogue Sport SN: 001a07 531903 Problem: remote start the vehicle (3x locks), car started with no issue. However if I don't make it to the car after 15mins, vehicle shutoff as expected, but the vehicle has unlock and parking light kept stay on and kill the battery. Is there setting on this unit to prevent this 2 issues. (locked after shutoff and turn off the parking light) Appreciated your help!!!

0

Can't find lock/unlock wiring

Working on a 2010 Chevy Traverse, photos show the pink and orange wire at the Bcm but it this situation those wires aren't there, I try to find some others but can't yet.. Evo RS4

0

Flash limit

Hi! Could you please reset flash limit sn 001A06 520354. Lost keys of car, make new keys, now we need flash module. Thanks

0

Please reset EVO-ONE Programming reach limit: SN : 002B04 676425 and i cant start by remote like when i buy it

03/11/2024

GMC FABRICE (130Pts.)

0

GMC regular cab WT 2024

Bonjour, je viens d'acheter un GMC regular cab WT 2024 push strat, et souhaiterai mettre un demarrage à distance qui fonctionnerai avec la téléommande d'origine, merci de votre réponse. Fabrice

0

Please reset EVO-ONE Programming reach limit: SN : 002B04 676425 and i cant start by remote like when i buy it

0

Where to start?

Ok, fighting this thing for months. I bought a new module, programmed it, installed it, get the same no start as I did with old unit. I took the new one and reset. Reprogram and tried again and still nothing. I can't even get it to allow me to program the remotes to test the start function. So pulled it out, put the old one in and it tried to start after I pulled the OBD wire. Plugged it in and it started and ran for a few minutes and I tested everything. Great it works again...next morning, doesn't work. Single light flash and nothing. I started it with the key, did a remote start transfer and it took over. I pulled the key out and it stayed running for about a minute, then stopped. I tried again, nothing. So after 8 hours, I tried to remote start and it did, ran for about 10 seconds and shutdown. What's going on? Do I have a wire gremlin on the vehicle side? I disconnected all the harnesses wires, plugged them all back in and still nothing. Is there an alternative wiring?

0

001A06503255

001A06503255 doesn't work

31/10/2024

Toyota G M (14840Pts.)

0

2022 Hilux

Hello. Is there a manual for installing evo-one on 2022 Hilux? Key.

0

Getting the Evo start app to use km instead of miles

Hi, Is there a way to change the settings in the EVO app (for android phones) to use KM instead miles? I can't seem to figure out how to get the mileage display changed to use KM (in Canada) Thanks

30/10/2024

Honda RonMor (130Pts.)

0

2025 Honda HR-V Sport

Hey, I would like to know what T-Harness model will fit the car. Thanks.

0

How to set up for telematic app

I try to install the app telematic to use with fortin

0

I installed an evo-one with 441 rf kit and can't get any response from valet button or antenna LED

2004 GMC Yukon Denali.

0

2004 Ford explorer not seeing inputs from lock

I installed my EVO-One and was trying to program it to see the keys and this is when i first noticed that the evo was not seeing the inputs from the factory key lock and unlock, luckily i was able to get around it by starting the car with the key, and it accepted it, so further down the road i now have it fully programmed and installed, i turned on the feature that when you start the car and step on the brake it locks the doors, which it does, then when you shut the car down the doors unlock, which it also does, so the Evo is able to control the locks fully, but it is unable to see the command from the car, do i have to have a seperate remote because i really don't wish for that, am i missing something? like i said it sees the car start, it sees it shut down it controls the locks fully, but when i push the button the evo doesn't respond to the inputs at all. is it a setting that i messed with by accident?

0

2019 Honda HRV, What settings do I have to enable for EVO ONE RM942 for the antenna to power up and learn Fobs?

I Installed the EVO ONE RM942 with Hon8 T-Harness. Three lock on factory fob works remote start function but when I do learn procedure in RFK 942 manual antenna doesn't light up. Tried with turning the key on and off and brake pedal as well as with the valet switch but neither excites the antenna power. Guessing I just didn't toggle the right setting when programming the EVO ONE but couldn't find anything else in the instructions.

0

EVO ALL Stuck in Yellow and Red Light Flashing

Hello, I am installing this on my 2012 VW Tiguan. I followed the process guide 92511. After decryptor and returning the vehicle, yellow and red LEDs flash, instead of staying on like explained on Step 13. Now it says my unit (SN 001A07 559614) has recheaed its limit and I am really stuck. Can you please assist? Thanks, Andrew

0

EVO All Decryptor count reset request

Hello, Could you please reset the decrepytor on my EVO-ALL SN 001A07 559614. Thanks, Andrew

0

EVO ALL 2020PTS MAN TRANS, NO BRAKE OUTPUT OUT OF EVO ALL

2020 VW JETTA PTS MANUAL TRANS, FORTIN EVO ALL BYPASS DIRECTED 5706V 2-way remote start, Fortin unit is not doing hand brake out put any suggestion where to start

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue