English
Mon compte Créer un compte
English
EVO-START Wirecolor

Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

TOTAL ESTIMÉ :

Commander

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

Réinitialiser
Réduire tout
Tout développer
Réinitialiser
Réduire tout
Tout développer
picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question
LES + RECENTS A VOIR! LES + NOTÉÉS LES + RÉPONDUES LES + VUES

03/03/2025

 GMC Charles Leeper (210Pts.)

0

Can I use the A14 switch option for the parking light control when configuring the EVO-All?

Guide says for parking light control the A14 brown/white wire needs to be tied into the light blue wire of the second BCM connector pin 8. Didn't know if the A14 was turned on when configuring the module that would negate needing to tie into the pin 8 second connector on the BCM.
Connectez-vous pour répondre Voir 0 réponse(s)

27/02/2025

 Ram RCMAuto (160Pts.)

0

2013 ram 1500 chrt7 harness can not get module to work

ok Im still having programing issues, i can get to step 8 , i have only a solid blue light i have verified that i have 2.5v on each side of the can bus and i have 12v battery power on the yellow wire at the module with key in the crank position, yet i still only have the blue light on solid
Connectez-vous pour répondre Voir 1 réponse(s)

26/02/2025

 Infiniti JoeeYv (180Pts.)

0

EVO-ALL, 2017 Infiniti Q70, unable to get past step 7 (standalone with T-harness)

On step 7, brake pedal press turns on blue and red led, shortly after, red led does not stay on and turns off, only blue led stays on, unable to continue on to step 8. S/N: 001A07 670775
Connectez-vous pour répondre Voir 1 réponse(s)

26/02/2025

 Mazda Vladimir Olifer (410Pts.)

0

Evo all, Mazda 3, Thar maz1

The first unit was a fiasco. I decided to try with another, new fortin evo all, when programming keys at step 13 the red diode lights up. The firmware is the latest.
Connectez-vous pour répondre Voir 1 réponse(s)

19/02/2025

 Dodge Brian Freeman (130Pts.)

0

Starter kill relay wiring for a 2015 dodge Durango with a fortin evo one with thar-chry7 t harness

Starter kill relay wiring for a 2015 dodge Durango with a fortin evo one with thar-chry7 t-harness
Connectez-vous pour répondre Voir 1 réponse(s)

15/02/2025

 Acura StoychoKostov (130Pts.)

0

2014 acura rdx which t harness

Have a 2014 acura rdx with a push button start. The kit came with a THAR-ONE-HON1 T-Harness. However it seems that it is for key-to-start vehicles. Which T-Harness would work for my vehicle?
Connectez-vous pour répondre Voir 1 réponse(s)

15/02/2025

 Mazda Vladimir Olifer (410Pts.)

0

Fortin reset, key programming.

I made a mistake programming the keys again. How can I reset the unit and start over? I reset it and flashed it to version 71.47 but it didn't work. Dear derek g, please help me one last time. Reset my device S/N 001A07 026326 and key programming. Thanks
Connectez-vous pour répondre Voir 1 réponse(s)

12/02/2025

 Mazda Vladimir Olifer (410Pts.)

0

Autostart does not work, Mazda 3, 2018, auto

My fight continues, I hope I win Initially I programmed the keys incorrectly and had to do everything again, I reset and flashed to version 71.47, I successfully programmed according to instructions 62681, I did everything step by step and everything went well, but when I press the car lock button three times to start the engine, the red then yellow indicator lights up, the unit clicks a couple of times and that's it, the engine does not start. EVO-ALL, Thar Maz1. It reacts to locking and unlocking and the blue indicator lights up. Please help me figure this out.
Connectez-vous pour répondre Voir 1 réponse(s)

07/02/2025

 Subaru brian.foulks@gmail.com (130Pts.)

0

THAR-ONE-SUB3 compatible with a 2012 Subaru Forester Keyed ignition ?

Documentation goes from 2014, but compatible vehicles list just states Subaru. Looking to pair with evo-one.
Connectez-vous pour répondre Voir 1 réponse(s)

06/02/2025

 Chevrolet Harrison Manyoma (130Pts.)

0

I want to add shock sensor & siren to evo-all on 2018 Malibu using GM6, how do i go about wiring?

Using Evo-All w/GM6 harness; OEM factory fob 3x Lock to remote start;
Connectez-vous pour répondre Voir 1 réponse(s)

04/02/2025

 Audi Donald Prouty (160Pts.)

0

Evo all works fine, added Evo start lte with the rfa2a cable.

The Evo all has been installed for almost a year and works fine, even after the failed Evo start lte. I plugged the blue connectors from the rfa2a and the start wire harness. Unplugged the 4 wire data plug from the Evo all, taped off it off for protection, and plugged the 4 wire data plug from the rfa2a harness. The black and red wires are not connected and taped off. When I go to program the start, by disconnecting the data port and holding the program button nothing happens. I used the harness for my car also when installing the Evo all. I also flashed the Evo all . Did I miss a step or something?
Connectez-vous pour répondre Voir 1 réponse(s)

02/02/2025

 Mazda Vladimir Olifer (410Pts.)

0

Mazda 3, 2018 step 13, solid blue light

I have EVO-ALL and T-HARNESS Maz1 at step 13 the blue indicator is constantly on, there is no reaction to the key, does not change color to yellow Mazda 3, 2018, automatic

Connectez-vous pour répondre Voir 1 réponse(s)

02/02/2025

 Mazda Vladimir Olifer (410Pts.)

0

Mazda 3, 2018 step 13, solid blue light

I have EVO-ALL and T-HARNESS Maz1 at step 13 the blue indicator is constantly on, there is no reaction to the key, does not change color to yellow Mazda 3, 2018, automatic

Connectez-vous pour répondre Voir 1 réponse(s)

02/02/2025

 Mazda Michael Kubinski (130Pts.)

0

EVO ALL Mazda CX-5 Decryptor not working

I am installing a Fortin EVO ALL with THAT-MAZ1 THarness on a 2019 Mazda CX-5 PTS A/T following guide #66311. I had successfully performed steps 1-16, but repeating steps 1-12 as directed by step 17, it wouldn't complete the program, even after multiple attempts. Following previous answers in this forum, I was instructed to reset the EVO ALL and try to reprogram. Now, when I perform steps 1-12, I am getting a flashing red LED instead of the alternating Red and yellow. The Flashlink indicates Invalid Key Data. I have even attempted to program with a new module with the same flashing red LED. Any help would be greatly appreciated.
Connectez-vous pour répondre Voir 1 réponse(s)

02/02/2025

 Audi nvrfollow (130Pts.)

0

Windows will not go up, or down from the app

21' Audi SQ5 - Evo-One with Remote Start and Thar-AUD2 Harness. The windows will not go up or down from the app. The app say Aux5 should put the windows up, and Aux6 should put the windows down. When pressing function Aux5 on the app, it says "Windows Closed", but nothing happens. When pressing function Aux6 on the app, it says "Aux6 Command Sent" and makes a sound of the windows going down, but nothing happens to the car.
Connectez-vous pour répondre Voir 1 réponse(s)

31/01/2025

 Ford james larocque (280Pts.)

0

Blue plug on For4 T-harness

I would like to add an rf kit to my installation and wanted to confirm if i can plug and go or need an adapter. I have an Evo-all installed with a for4 t-harness. is the blue female plug on the t-harness for the rf kits such as rfk442 or is the RFA2A adapter required?
Connectez-vous pour répondre Voir 1 réponse(s)

09/01/2025

 Audi Elie Yebouet (130Pts.)

0

Smart lte installation

Hello, I will install the evo-all-lte with the thar-aud2 on an A4 2018 of a customer who is close to me. I have a few questions because this is the first time I use your brand. The steps are not very clear in your guide, but with my experience, I managed to understand most of it, but I have questions. 1. For the configuration, is it of the smart lte, I have to program the evo-all first and then connect the smart lte and program it? 2. Your guide asks for an RFA2A “sold separately” to connect the smart lte to the evo-all, but I do not need an rf kit since I use the application and the original key. On the other hand, instead of the RFA2A, is there a connection kit provided in the box?
Connectez-vous pour répondre Voir 1 réponse(s)

05/01/2025

 Volkswagen robseanna (200Pts.)

0

Is the T-harness I received with EVO-VWT1 wired incorrectly?

I installed an EVO-ALL using the EVO-VWT1 kit on a 2015 VW Jetta Push-to-Start. The EVO-ALL does not power up when I plug in the black datalink connector from the T-Harness. It powers and programs just fine on the Flashlink programmer connector. I think the T-harness connector is bad but would appreciate some guidance on how to address this.
Connectez-vous pour répondre Voir 1 réponse(s)

06/01/2025

 Ford StealthSecurity (130Pts.)

0

Harness compatibility

Your website states two compatible harnesses for Ford Escape Hybrid 2008-2012 model years

THAR-FOR1 & THAR-FOR4 and documents indicate these work with both the Evo ONE & Evo All module

The question is .. Are these true plug and play or are splices still need to be done ? 

What are the differences between both harnesses Thar-For1 Thar-For4 ?

Would also like to use a EVO-START Original one.  Is this still fully functionable in Ontario Canada?

Connectez-vous pour répondre Voir 1 réponse(s)

05/01/2025

 Kia Steve Brown2 (140Pts.)

0

Program RFK-411 Remote with Evo-One-KHY2 - 2016 Kia Optima

Hello,

I'm experiencing difficulties programming an RFK-411 remote with my EVO-One-KHY2 system installed in a 2016 Kia Optima (US model).

Here's what I've done so far:

    Installation: I followed GUIDE #91351 to install the T-harness and EVO-One unit. Firmware: The EVO-One has the latest firmware for my vehicle (updated via FlashLink). Programming: Since my car is the US version without the (~)EMS COM cable, I used PROGRAM: 2 to program the EVO-One. Remote Pairing: I followed GUIDE #68771 to connect the RFK-411 remote, but have been unsuccessful using both the ignition switch and valet switch methods.

The Problem:

The instructions state that the blue light on the RF antenna should flash with each brake press, but the blue light does not respond. This prevents me from completing Step 4 of the programming process.

Troubleshooting:

    I've confirmed the red light next to the yellow wire on the EVO-One is off, indicating it's not in locked/armed mode.

It seems the EVO-One is not registering the brake presses, which is preventing the RFK-411 remote from being programmed.

Connectez-vous pour répondre Voir 1 réponse(s)

04/01/2025

 Subaru jstratton05 (450Pts.)

0

Battery Drain day after install Subaru Forester 2022

Installed Evo-One on Subaru Forester 2022 PTS (US) with THAR-ONE-SUB2 T-Harness and Linkr-LT2. Battery keeps draining with fortin connected. T-Harness was a simple installation with 2 connectors behind cluster on the Keyless access ECU. All recommended setting selected. It seems the car is not going to sleep. Any idea to solve this problem?
Connectez-vous pour répondre Voir 1 réponse(s)

05/01/2025

 Nissan Jim Trudell (150Pts.)

0

2011 Nissan Rogue - Auto headlights stay on

2011 Nissan Rogue w/ Intelli-Key EVO-ONE with T-Harnesses. When headlights are set to AUTO and a 3x Start is triggered the lights stay on after the remote start either times out or is manually stopped via the key fob or brake input. Door trigger wire (Dark Blue) doesn't seem to have any effect on this. I even tried to ground it out directly to see if it would turn the lights off. Anything else to try?
Connectez-vous pour répondre Voir 1 réponse(s)

31/12/2024

 Volkswagen AlzyA00 (130Pts.)

0

Which T-Harness do I need for a Volkswagen Arteon 2019?

There are multiple choices for Volkswagen. Which is the correct harness for my car? Volkswagen Arteon R-Line tsi 4motion S-A DSG Automatic Manufacture date: 14 May 2019 Thanks
Connectez-vous pour répondre Voir 1 réponse(s)

24/12/2024

 Ford Kasunsau (160Pts.)

0

not starting when pressing keys 3x

ford ecosport 2019 push stsrt I think I did all things correct. after pressing lock 3x, led lights going red yellow blue signal and honk, again red yellow blue signal and honk. but vehicle not starting. please help me to find the solution.
Connectez-vous pour répondre Voir 0 réponse(s)

20/12/2024

 Volkswagen Dennis.daraphone (310Pts.)

0

VW Auto Stop-Start Error

2018 VW Tiguan, AT Std-Key, Analogue Cluster THAR-VW6, EVO-ALL FW 64.06 After installation of the THAR-VW6, the car has been giving an Auto Stop-Start Error. What option should be enabled to allow this option again.
Connectez-vous pour répondre Voir 1 réponse(s)

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer