Questions & Answers

2014 Mazda CX5 ; manual push to start ; Evo-one w/MAZ THAR ; SN 002b04 638289

Cranks but doesn't start. All fob functions work, car runs normally, and it goes into ready mode and shuts down after exiting. Won't autostart after getting out of the vehicle - what am I missing? Valet mode off.

Using default settings with the plug&play harness.

Firmware 85.14

A1 through A-10 : ON

A11 OFF ; B1 OFF ; C1 ON

D2 ON

D3-D5 : OFF ; D6 ON

Firmware 1.26

2 through 15 : option 1 (default)

16.5 ; 18.1 ; 19.1 ; 20.8 ; 21.2 ; 24.1 ; 25 (off) ; 26.1 ; 29.1 ; 30.1 ; 31.1 ; 32.1 ; 33.2 ; 34.1 ; 35.1 36.3 ; 37.1 ; 38.1 ; 39.1

Hello,

I recently bought Evo start 2 for my Evo one which I have been using for more than 2 years on my Mazda cx 3 2019 with T harness. At that time I did not choose the app start option while programming the Evo one. Can some please help me where should i be connecting the Yellow wire. Does it goes into the A1. Also none of the other options like door unlock are not working. Do I have to reprogram the Evo one again. I know that the firmware should be atleast 1.21. When i push start from the app the green light on the evo start 2 is turning on but nothing is happening.

I have followed the following steps and it was not working.

Ignition ON - OFF - ON (While holding the brake?)

Press and release brake 4 times

Press and hold the Evo start button until green

Turn OFF Ignition

Thank you for reading any kind of help or suggestions is much appreciated 

mon mazda cx5 2018 klaxonne après le démarrage avec mon démarreur a distance viper modele 7145 v. il a commencé ca... avant non tout était silencieux. j'ai changé la batterie du véhicule peut etre ca ?

Hi, I have and Mazda3 2019 (with push start and presence key) and installed an Evo One + Thar-One-Maz5 + Evo Start2.

I've connected the auxiliary output on a relay to activate the windshield heater and rear window defog (in the mazda3 both are activated together with a ground signal). Its supposed to ground the yellow/black wire when the seat/driving wheel heaters are activated right?

I was not able to test it yet, my car stays in a heated garage and if i understood correctly the evo one uses the internal temperature sensed by the module to activate or not the seat and driving wheel heaters (and the auxiliary signal). So the car doesn't stay parked out for long enough to get so cold inside. 

If i use the defrost button in the app, will it bypass the temperature control and activate the headers/auxiliary signal? If not, is it possible to change config to manually control those? 

Thanks!

Hi

My question is how can I remove the EVO-ONE with THAR-ONE-MAZ3 from 2019 Mazda 6 safely and take the car back to factory setup?

I looked everywhere to find a guide or video illustrate such a thing but I couldn't find one ):

Help please!

Which one would I need for a stock car with no remote start? I only want to use the OEM key fob to control it and don't have any other starter installed. From what I think, the evo all is not stand alone, which requires another starter from viper, compustar? But the evo one is standalone and so this is what I would need to be able to program to my oem key fob?

Specific  Mazda questions, but some background knowledge: Mazda cars have this issue where if a car has been remote started, the engine shuts off if the door is opened. It's a "safety feature " but clearly very poorly thought out. I'm wondering if Fortin is able to bypass it.

1) for a 2016 cx5 automatic, would the engine stop when a door is opened ? In this video below (skip to 15:15 if not already linked) you can see how this gentleman can open the door and engine still runs.
https://m.youtube.com/watch?t=917&v=wbIzTEKrUrc&feature=youtu.be There is still safety-engine turns off if he doesn't push start the car before touching the brakes. This video is for a 2019 cx5, but it uses the same key fob as my 2016 cx5. Would I expect same operation? I may have seen a user post a 2016 cx5 with the same issue. 

2) I'm planning to get a new mazda3, and install Fortin if it works well with cx5 above. Same question as above: would this system allow me to open the door and have the engine still run?