Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

TPMS Light after EVO-ONE install; lots of Communication Lost codes

Hi, so after my remote install, the TPMS light is on all the time. I understand during remote start this is normal, but this is all the time. I have checked all my tires, they are within normal range. So I ran a code pull on all CANBUS systems, and the result was CURRENT/HISTORY lost communications codes on several modules, one being the TPMS system. It is system code B1247, Main Body ECU Lost Communication... however there are several others too, a dozen or so, to other systems. I thought perhaps they were historical from when I disconnected everything to connect the T harness, but I cleared them and all came back, after I tried clearing just the TPMS code unsuccessfully. I attempted clearing the current/history lost communication code. The light went out for about half a second, and it came back quickly. Checked codes again, it was back. Not sure if that screen shot is visible, all I can see is a placeholder symbol. I will place a share link in my google drive to the code list. VIN removed, but it is a 2018 Toyota Corolla H-Key using THAR-T18 (think the kit i bought was EVO-ONE-T18?, I'll reference and update, but it was the EVO-ONE kit containing the T18 harness) I am presuming this is possibly a programming issue with the EVO-ONE module since the OBD2 port passes thru, but not sure. This is my first experience with Fortin products and do not want to start messing randomly with settings I do not fully understand yet. I've done remote starts before but this is my first Fortin system, switched because of the quality level; I do have a EVO-FLASH unit and have the ability to flash/reprogram everything myself, I have all tools and interfaces needed to make it work, thanks in advance. Details are below: 2018 Toyota Corolla H-key, EVO-ONE, THAR-3 / THAR-18, RF442 installed, TPMS-hijack installed to allow OEM remote start (working OK since installed) https://drive.google.com/file/d/1wVWxhNDwFs4chpdfGXHE7lqC3UKpKHwd/view?usp=sharing

0

Am I able to change the email I registered with on flashlink?

I registered under g.slair12@gmail.com and want to change to garyslair@comcast.net

0

Remote auto engine start for Toyota Land Cruiser 200 2011 years

I would like to know if Fortin EVO-ALL is suitable for remote engine starting (By pressing the car lock button 3 times) for a Toyota Land Cruiser 200 2011y ignition system push to talk

15/03/2024

Acura Son Vo (130Pts.)

0

please reset flash limit on my evo-one

19/02/2024

Audi Mursini (180Pts.)

0

2015 audi a3, setup and programming complete- no start and no lights on EVO-vwt6

After successfully programming the unit with flash updater and r-link, and a successful d-cryptor session, I reinstalled the unit, and hit the lock button 3 times, and i got nothing. I noted that there are no lights on the unit after all connections are made, with the 4 pin black connector first, and all other connections followed.

0

The Current Device cannot be Flashed anymore

Trying to update the firmware, when connected to the vehicle to program the lights do not turn on. Unit is for a g37s SN: 002504 077873

0

Nissan 2020 NV2500 20 pin connector location

The purchased wiring plan does not have a location or picture for a 20 pin connector which has the emergency brake, dome light and truck pin, please help with location and any other knowedge. Thanks

0

Can’t get extended options to work with Carlin’s and Evo all any ideas?

Hey guys I’m looking for some input on why I can’t even get the trunk release (rear door hatch) to unlock, more concerned about being able to full windows up/down through auxiliary….any ideas on how to program this or maybe I missed an extra wire? Evo all thar4 2011 ford escape, using car link

0

2019 Qashqai vehicle has no crank no start when the module is plugged in.

2019 Nissan Qashqai, automatic, key-start. Installed Evo-all with T-harness. Stand alone install. Evo-all programmed fine. Got the correct lights when programming, dcryptor went through fine. Installed the module back in the vehicle after dcryptor, the vehicle will not crank / start. Unplugged module, left the t-harness connected, vehicle starts fine (with a bunch of codes). Cleared the codes, re-installed Evo all module, no crank / no start. Also, the evo-all module does not light up / respond to the vehicle FOB (I.e. no light flashes when pressing lock or unlock) Things I have done so far: checked t-harness (pin location, made sure plugs are seated properly). Removed t-harness, vehicle starts fine, re-installed t-harness, vehicle starts fine, re-installed Evo all module, same issue, no crank / no start. Downgraded firmware to minimum, no changes. SN 001A07 284515 Current firmware loaded - 72.52 I have not tried to replace evo-all with a different one. Could the evo-all module be bad? Thanks.

0

Help with Omega RF install

I bought two of these.  One for an EVO-ONE, one for EVO-ALL.  I managed to get the EVO-ONE working on a 2020 Hyundai Kona.  I cannot get it  to work on EVO-ALL with multiple vehicles (2010 Ford Fusion, 7.71.52 and 2014 Chrysler Town and Country, 7.58.01)

The instructions both in the box and on the Fortin website did not work.  Here is what I figured out to get the antenna into pairing mode:

Unplug antenna if you already connected it

Unplug data link (black connector) from EVO-ALL

Hold programming button

Insert data link

Release button when lights are blue and red

Connect antenna (On this antenna, it flashes once.  If I hook up the antenna from the EVO-ONE install, it flashes 6 times)

Ignition on

Ignition off

Ignition on

Antenna is lit up solid

Within 5ish seconds, press the brake pedal 4 times (antenna should flash with each press)

After the 4th press, it should be flashing rapidly

At this point I was hoping I could program the remotes but they still did not respond.

So far, when I asked Omega support they responded with "Was the evo-all set for Omegalink/Crimstopper rf kit and did the box for the olrf15sst have the white label stating it was compatible?" which is Yes and Yes.  They then followed up with "Just the RF kit protocol and the adapter should be fine. Try holding the start button for 3-5 seconds when you program it."


I get the same behavior with either their adapter or the RF-A2A

Any other ideas from Fortin?  Hopefully my new steps will help.  I reached out to Omega also for clarification about the antenna blinks


EDIT: Omega has been more responsive but no luck so far.  I did try updating the firmware on the Chrysler to 7.74.39 with no luck.  I flashed back to 7.58.02.  Now I no longer get 1 blink when I plug in the antenna in any scenario, only 6 blinks.  (5 blinks is a 1 way antenna, 6 blinks is 2-way according to Omega).  I also am no longer able to replicate my steps above because of this.  One thing is they were not sure if the antenna is supposed to light up when programming an EVO-ALL.  It sometimes does for the EVO-ONE.

0

I purchased a single use token. It was never emailed to me

Hello, i purchased a single use token this morning and still have not received a email with the code? I would like to know how many days to expect before I receive the code?

0

2013 Audi A7 Wont Start, key not recognised

I'm currently using an evo one SN: 002B04 079929 I'm trying to program this for an audi a7 2013. I've upgraded the correct firmware as per the manual however i'm getting an issue when attempting to remote start. It shows on the dash key not detected every time. I've done this 3 times now and the 3rd time the Decryptor limit has been reached. Can you advise and then reset please? The programming went fine, all the lights appeared as shown. If i leave the key in the car and remote start it, its fine. but if i do it outside the vehicle it displays key not recognised. Thanks

1

How long does it take for the flashlink to dcrypt the immobilizer?

How long does it take for the flashlink to dcrypt?

0

application evostart 2

4 mars 2023 11h00 L'application ne semble pas fonctionner. As-T-il une probleme avec l'application? merci.

0

Start air conditioning on remote start mazda 3 2021

Hi, exist some option to start the air conditioned on the car with the remote start o the mazda 3 2021?

0

Evo All reset

Need my EVO All reset 002505118401, had troubles reprograming for remote time. Also question on 11 Toyota Prius install, with remote start, if i unlock doors via remote and open any doors or hood it shutsdown the motor but if i do with the hatch the motor stays running. Using the recommended settings(except 20 min start and lock unlock lock for start and latest firmware. And one more question, if I was wanting to add the alarm feature for this, i would hook up the extra wires according to alarm guide and settings in firmware and reflash and setup like the remote start? Also looking at wirecolor.com wires for the 11 prius, the horn negative is not the light blue at black connector L52 at steering wheel, it is the 8th pin yellow wire, or you can also use the light blue pin 24 at white 40 pin 2C same connector as the Ignition positive. And a wire you dont have listed Parking Positive pin 18 on 36 pin 2D(above 40 pin 2C)

0

Decryptor reset

Can you please reset Decryptor limit on eco-one. Serial 002B04310952

0

Adding remote start via app to my EVO RS remote start

If I have the EVO RS installed in my 2020 Audi S6, is there a module that I can add that would allow me to remote start from an app?

0

2020 Subaru Forester install questions

1. In this thread from a while ago, it was said that enabling 3x lock is not recommended for a 2019. Does this still apply? https://fortin.ca/en/qa/90775/LockLockLock-Forester-Sport-2019/ EDIT: May have been fixed in firmware 1.24 AKA 0.60? 2. Guide 98941, page 7. I'm probably over analyzing this, but I assume for the Yellow/Red and Yellow/Green wires, the illustration is saying to connect the respective wires together. Is that correct? I figured there would be a black circle on it if that was a case. I initially thought this was a spliced wire from the factory. 3. Will there be issues if I use an Omega RF kit and have to use firmware 0.44? Thanks all!

0

I there a t-harness for a 2004 Mazda RX8

Is there a T-harness for a 2004 rx8, I only see for push to start

0

decryptor limit reached for evo-one sn 002B04 061206

Reset Evo one sn 002b04 061206

0

Outlander 2022 with Fortin EVO One - remote start does not always work when using RFK942

Hello, 

When pressing the remote start button on the RFK942 key fob, the remote start does not always activate. When this does not happen, the car behaves differently: the marker lights come on along with the low beam headlights for a couple of seconds, then everything goes off. However, when the remote start command is successful, the low beams do not activate, the turn signals come on for half a second, followed by the marker lights. Additionally, there seems to be a door lock click, then the engine starts, which can be seen in the video. https://youtube.com/shorts/B6o0cWfPQQo

Remote start with the factory key, activated by three presses on the lock button, does not cause any issues with the remote start.

The flash-link 4 has version 5 firmware, vr. 4.08. An additional impact sensor and siren are installed.

There is also an issue where if the car is armed or started with remote start, if the trunk door is opened with a sweeping motion from below (via the sensor), the siren starts making noise. If opened with the button on the door, everything is okay.

Thank you for your help!

0

Mazda 3 2018 - Evo One - Rear Defrost

I installed a Evo one in a Mazda 3 2018 push to start automatic with the Thar-One-Maz3 Harness with OEM remote (3x lock). I want to activate the rear defrost on remote start. I have activated the option 39. On wirecolor, it says that the rear defrost is "Positive". Two questions : - What option should I take for 25 ? (there are 6). - How I set the A13 wire to send positive signal ? - How do I wire the A13 ? Do I simply tap on the vehicule wire ? Thanks ! How can I activate the rear defrost ? On wirecolor, it says that the rear defrost is "Positive". I have activated the option 39. What

0

hyundai door lock

Good afternoon. On Hyundai cars, after turning off the engine, the doors will unlock after a couple of seconds... What can be done to ensure that they remain closed at the end?

0

Is there an instalation video or instructions?

There are no instructions or video

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue