Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

27/12/2024

Ford MCA (130Pts.)

0

2016 Ford Transit No PATS Transponder Keys. How to Program EVO-FORT4 to vehicle?

0

Golf R no power on 4 pin datalink connector with THAR-VW1

Hello. I got it all connected. Plugged in the and no power on the evo. No LEDs turned on. I tried to check the voltages and no volts. I made sure the harness is plugged in. Any ideas?

0

Missing a female connector on EVO-START LTE

It is missing the blue four pin female connector.

0

Please help on wiring 20 pin connector (Evo Chatr 5) in my Jeep Patriot Patriot to distance start by original key?

Please help on wiring 20 pin connector (Evo Chatr 5) in my Jeep Patriot Patriot to distance start by original key. I received my Evo chatr 5 with no instalation guide, I don't know how to connect the 20 pin connector wires... When I hold the program button the leds become Blue but when I put the key in ignition they still on but not flashing? Please help on this urgently, the snow is coming :)

0

EvoRS CHRT5 Module goes off when ignition on

I have 2006 Grand Cherokee, I installed the unit as stand alone(F). Solid blue goes off when i turn on the ignition during programming. Any idea to solve it?

0

T-HARNESS

Do you have T-harness for a 2011 KIA Cee'd (EURO), for an Evo All?

0

Is my Module Faulty

Installed EVO ONE on a 2001 Chevrolet Suburban with NO T-harness. Plugged module per procedure, Blue light came on, Plugged in harnesses, released button, no red light came on. Tried several times, troubleshooting says J1850 serial data line not seen. Tested line with scan tool and functioning fine. Checked continuity from OBD connector to module connector - good. Confirmed conection from connector to module pin - good. Looking for input if module is faulty. Please advise. Regards, Bob____

0

How to wire and programming

After programming my car won't turn over the car turns on but won't click over. When in on/run position led is yellow and not blue. I have a 2008 jeep Patriot I am not using any thing extra no kits no hood pin is there any thing else I need beside the Evo and harness for my vehicle

0

Do you have to connect wires through the 20 pin connector and the 5 pin can connector?

I just want to have the remote start feature on my 2013 ford fusion standard key. What do I need to do to accomplish this? I have the correct t harness and an evo all.

0

Black 20 pin connector vs White 20 pin connector

Is there a difference between the black and white connectors? Connected the yellow wire from a black 20 pin connector (Evo All).....NOTHING, replaced it with the yellow wire from a white connector... worked after that. Are they pinned different?

0

Evo-one with T-Harness will I need to install 6 pin power connector

Hey all, I have a 2016 Audi A3 8V Push to Start. & before I begin my installation here. I am following the given guide for the no key required Evo-one and T-Harness (thar-vw1) & was wondering if I also need to install the 6 pin power connector that came with my Evo-one. As the guide I am following doesn't specify for my vehicle. Thanks!

0

2018 4Runner horns goes off 6-7 times when remote starting with phone module

is there a way i can flash the evo one module to not make the factory security system think someone is breaking in until the car cranks?

0

Headlights flashes 3 times every time I take off

Just got the EvoStart 2 installation done by a dealer. Everything seems to work great except that my headlights are flashing 3 times every time I take off or slow down below 40 km/hr. Other drivers are not liking me right now...