Questions & Réponses

Do you know why the suv alarm went off after the remote started the vehicle?  Is there any option I forgot to select?  Setup as stand alone with 3x lock to start.  SN:  001a07 531903 2018 Nissan rogue sport 

Hello. I wonder why you don't include BMW F15, F30, etc. in the Fortin list? It's a simple logic: After the bypass relay is turned on (key in the coil), after 2 sec. pulse on a start-stop for 1 sec... After 3 sec. f pulse to the brake pedal for 5 sec. and after 2 sec. a start-stop pulse for 1 sec. (500 Ohm...or 680 Ohm...or 1000 Ohm). I'm struggling to put this together with some kind of autostart, but it would be easier with Fortin.

I have a 2015 Corolla with an automatic transmission start button. 

Installed with THAR-TOY6 T-Harness & EVO ALL

The device flashes blue when opening or closing the doors, but when trying to operate it with the remote, it flashes 4 red flashes.

Flash blue once before red flashes

Please see the attached video.

https://photos.app.goo.gl/6rfod5uAwRBQ7MgUA

After installing the Lock x3 remote starter and I checked work well. also I flashed the engine to turn off after 15 minutes. But there are situations where the engine turns off when I open the driver's door after starting the remote start. Even though it hasn't been 15 minutes.

It's happens sometimes. What's the problem?

Hello. I installed evo-all (standalone) on a 2017 Octavia. The car starts with the external input (yellow-black), but does not start with the OEM remote control. The blue LED lights up on the second press on the close button of the OEM remote control (that is, it does not light up on the first press). 001A07 414271

Hello. I installed evo-all (standalone) on a 2017 Octavia. The car starts with the external input (yellow-black), but does not start with the OEM remote control. The blue LED lights up on the second press on the close button of the OEM remote control (that is, it does not light up on the first press). 001A07 414271

I buy FORTIN EVO ONE ALL + THAR-TOY13 + FORTIN RFK441+ fortin flashlink tools

I followed the installation instructions, but it didn't work I installed the device and made a flash, and when opening or closing the door, it flashed in blue, but when pressing 3 times to close, the remote start did not work I tried to flash the device again but it stuck in (DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR)

Hi,

My evo-all used to working with the OEM key 3-locks-to-start before.

Then I bought the RM 942 RF KIT.

Flashed the evo-all to 78.70, and the antenna to 1.05 already.

Followed the DCRYPTOR PROGRAMMING PROCEDURE. All leds are off at step 5 indicating it's already programmed.

After all these, it seems everything are connected and paired correctly. The lock/unlock buttons on the RF kit work properly.

BUT neither OEM key 3 locks nor RF kit key remote start ([+] + lock) could remote start the car. After pressing the OEM key 3 locks, I can hear the evo-all or some car electric component making the small clicking sounds, and the car turn signal lisghts had a couple of follow-up flashing, which seems to me like the evo-all is indeed carrying out the remote start procudre. But car does nothing, no cranking sound at all.

Did I miss anything again?

One weird thing to me is that I think I installed my evo-all with a T-harness, but in the Flash Manager software, after I select TOYOTA, SIENNA 2020, PUSH-TO-START, STANDALONE, there is only STANDARD CONNECT option but on T-HARNESS CONNECTION option in the connection type selector. Is this the problem?

Thanks,

Gerry

Hello. I installed evo-all (standalone) on a 2017 Octavia. The car starts with the external input (yellow-black), but does not start with the OEM remote control. The blue LED lights up on the second press on the close button of the OEM remote control (that is, it does not light up on the first press). 001A07 414271