Hello, and thanks in advance for the help. I am stumpped on this one.
I installed an Evo All in our 2018 Subaru Outback, standard key, standard installation. I connected and double checked all wires per the diagram. For the immobilizer I used the white/lt. blue wire on connector 3 instead of the white/blue wire on connector 4, becuase the wire on connector 4 did not exist. I completed the FlashLink Updater and dcryptor.
When I go to remote start (3X lock), the red led comes on, then the yellow, but it doesn't start. Then it trys again and then the red led flashes 3 times and they all turn off.
What am I missing or doing wrong. Below is the Connector 3 and 4 wiring option and a link to my installation guide.
Here is the installation Guide # 71981