Français
My account Register
Français
EVO-START Wirecolor

Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

ESTIMATED TOTAL:

Checkout

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

Clear All
Collapse All
Expand All
Clear All
Collapse All
Expand All
picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question
RÉCENT HOT! MOST VOTES MOST ANSWERS MOST VIEWS

27/09/2024

 Ram Ramy Fathi (230Pts.)

0

Does CHRT7 require any splicing or tapping for a 2024 Ram?

Considering buying a CHRT7 or CHRT6 for my 2024 Ramy 1500 Rebel with OEM remote start and keyless entry. I looked at the install guide, but its not quiet clear whether it requires splicing/tapping into any wires. (especially the parking lights, ignition, CAN low and High). Thanks
Login to reply View 1 answer(s)

26/11/2023

 Ram G M (14710Pts.)

0

dodge ram

Hello. I want to install fortin on a 2023 Dodge Ram. Can I use the instructions from Ram?
Login to reply View 1 answer(s)

29/07/2023

 Ram Corey Steinke (220Pts.)

0

Is evo-one compatible with gasoline 2023 Ram 2500?

Install instructions only list diesel pushbutton start.
Login to reply View 1 answer(s)

09/05/2023

 Ram Ariel Taveras (630Pts.)

0

2012 Ram 2500 Diesel Manual Transmission Remote Start

I have a 2012 Ram 2500 Diesel that I want to intall a remote start in using 3X lock function. Im going to use an evo one but I saw on the forum there is an additional clutch wire that needs to be installed? also it has to be programmed to manual mode and a sequence has to be followed in order to put it in ready mode. Is there any documenation covering the additional clutch bypass wiring because it is not mentioned in the installation manual of the truck. Will putting it in ready mode need me to press the lock button 3x instead of just one because I wont have an rf kit installed? Any other relevant information that is different from a automatic transmission install would be helpful as well. Thank you
Login to reply View 0 answer(s)

12/01/2023

 Ram steven madder (160Pts.)

0

2014 ram chart 7 problems

When programming when I get to step 7 when I turn the key the blue light goes out. When I turn the key off blue comes back on solid. I've verified the yellow ignition wire has power and the network is working.
Login to reply View 1 answer(s)

29/12/2021

 Ram joe tom (410Pts.)

0

Can bus faults after 3 trouble free years

Is there any warranty on a the evo device that stopped working out of the blue? My 2014 ram broke down a couple of nights ago and the dtcs state the can bus was not ok. U0001 I removed the can high wire from evo and all issues went away and cleared. I love my remote starter and fob, is there anyway to get this module repaired or replaced ?
Login to reply View 2 answer(s)

13/11/2022

 Ram Lucas Garwacki (130Pts.)

0

2014 ram 3500 will not remote start. Manual transmission

I followed the instructions for the thar-chr7 what else am I missing? flash link does not have an option for manual transmission I did not cut the yellow wire
Login to reply View 1 answer(s)

03/10/2022

 Dodge Logan Morrison (130Pts.)

0

I bought the evo-all, tharchar4, and flash link4. What more do I need?!?

I've purchased the Evo-all, thar-char4, and flashlink4, Can someone explain it in caveman terms how I can get my command start installed and working? 2012 Dodge Ram 1500
Login to reply View 1 answer(s)

29/12/2021

 Ram joe tom (410Pts.)

0

Can bus faults after 3 trouble free years

Is there any warranty on a the evo device that stopped working out of the blue? My 2014 ram broke down a couple of nights ago and the dtcs state the can bus was not ok. U0001 I removed the can high wire from evo and all issues went away and cleared. I love my remote starter and fob, is there anyway to get this module repaired or replaced ?
Login to reply View 2 answer(s)

09/10/2021

 Ram Dan Tavares (130Pts.)

0

Resistor required for parking lights at BCM on 2015 RAM

Per the instructions for 2015 RAM it says to tap into the connector at the headlight switch for the parking lights output and add a 1k ohm resistor. I previously had a different remote start module where i tapped into the parking lights output at the BCM and it didnt require a resistor. Can i tap into the bcm for the parking lights output with the EVO-ALL and if so do i still need to add the resistor?
Login to reply View 1 answer(s)

01/09/2021

 Ram CARMAN ZIEMAN (130Pts.)

0

no start intermittent

truck will not start with oem key fob. all electrical components non functional in truck. requires disconnecting battery to get truck to function again
Login to reply View 1 answer(s)

26/11/2019

 Dodge Ryan Aaron (130Pts.)

0

2006 Dodge Ram Diesel

Hello i have a 2006 dodge ram 2500 5.9 cummins. I just got the EVO-CHRT5 kit for remote start only and tried installing it as per instructions and nothing worked. I found a youtube video where some plugged the t-harness in and spliced the two yellow wires together and spliced the purple wire with the green/red from the 20 pin connection. the truck horn cherps, and fuel pump turns on but gauge cluster wont work and truck wont turn on. I have the flash like and updated it with the newest version and activated the d.1 setting for diesel trucks. Any help would be much appricated.
Login to reply View 2 answer(s)

15/02/2021

 Ram Dominic Vanacore (150Pts.)

0

2007 Ram 2500 Diesel Manual Transmission nothing happens

i have a 2007 2500 diesel with a manual transmission, i have the OEM key programmed but when i go to Remote start, all i hear is a relay click 3 times...also everytime i press the lock button on the key, the blue light is lighting up.... i have to make the comment, that when i program the EVO-ONE on flashlink, the "settings" that are saved on the EVO-ONE shows different than the ones i have programmed/saved. is there a "lockout" or something that i must do? for instance: i saved the turbo timer to be on for 4 minutes on the fortin flashlink, when i check to see "current settings," it shows that it is off. and so forth.
Login to reply View 1 answer(s)

11/01/2021

 Ram Mke Milburn (250Pts.)

0

Stops unless I hit push to start button twice

2019 Dodge Ram Tradesman 1500, new style, 5.7L, auto, Tip start, . Evo One w/THAR6 harness.Using factory lock/unlock/alarm remote, 3X lock to start then unlock to enter the truck.All soldered and heat shrunk connections. Installed back in June, worked great until last week. Starting one week ago, would shut off when I hit the brake even tho I pushed the start button before touching the brake. By accident I found out if I pushed the start button twice before hitting the brake, it would keep running as it had been doing the previous 6 months, what could have changed?...........Mike **EDIT* Now a few weeks later, it won't keep running even when I hit it twice, stops immediately when I hit the brake....any ideas?........Mike
Login to reply View 1 answer(s)

05/01/2021

 Dodge Mike Miller (170Pts.)

0

What is needed for remote starter on 2004 dodge ram

I have evo all and evo int sl + what connections do i need to make for the alarm and remote starter to operate. I am getting lost in a wiring mess.
Login to reply View 0 answer(s)

20/12/2020

 Ram Daniel Young2 (150Pts.)

0

Does EVO-ONE need a clutch wire for 2014 Ram 3500 diesel manual transmission?

After researching my options for a manual transmission I've determined the EVO-ONE coupled with the THAR-CHR6 was the best configuration for a stand alone system retaining original smart tip key. (Please correct if there is another option) According to another Q&A discussion regarding a RAM 3500 manual diesel, it was mentioned by Antoine Marion that a "clutch switch wire" has to be connected. After referring to Guide # 98581 for the EVO-ONE I did not find any information regarding the clutch switch. Shouldn't this be handled through CAN bus or does it need the clutch wire bonded with an output on the EVO-ONE?
Login to reply View 1 answer(s)

02/03/2020

 Dodge Zack Estep (190Pts.)

1

2006 dodge ram 2500 5.9l cummins evo all wire diagram. I have lights on box but will not start.

I have the t harness with the chrt5, I went thru the flash link but do not have an option for diesel or delay start or fuel pump prime
Login to reply View 1 answer(s)

23/02/2020

 Ram mike S (130Pts.)

0

Module appears to pass dcryptor, but still slow flashes blue when installed.

After returning module to truck after Dcryptor processs completes, the module still slow flashes blue when installed. The truck still starts with the key, remotely locks and unlocks, but will not remote start. The module does nothing but slow flash blue. I don't see anything in the instructions or troubleshooting about this problem.
Login to reply View 1 answer(s)

27/01/2020

 Dodge Michael Youngman (130Pts.)

0

2007 ram 3500 with Python 5706p won’t remote start

5.9 diesel won't remote start. The evo unit red led never illuminates. Did install A since couldn't find start wire any help would be appreciated
Login to reply View 1 answer(s)

27/12/2019

 Ram kevin langley (190Pts.)

0

can the evo-one be used as a remote starter in a 2012 ram with manual transmission?

can an evo-one be used for a 2012 ram with manual transmission using 3x lock without using a remote start as well?
Login to reply View 1 answer(s)

26/12/2019

 Ram Jeff Duhaime (180Pts.)

0

2019 RAM 2500 Push to start GAS blue light goes out after plugging in the 20 pin con (step 3)

2019 RAM 2500 Push to Start GAS

(What I wired)

THAR-CHR6 Harness:  I wired from the EVO ALL  A1  to the purple and white on the Igintion BCM module. A10 to Lt.Blue of T harness, A20 to the Lt.Blue/Black of T harness, with an OHM meter I ringed them out (they are connected). I tied the red connector  D3 & D1 together and soldeir together at the T harness as discribed.  Can 1 LOW connection C4 from the EVO to the Yellow of CAN 1 connector on the truck. Can 1 High connection C3 from the EVO to the Brown and White of CAN 1 connector on the truck. 

(plugged it the remaining plugs by the steps discribed into the EVO ALL) 

Issue I have: I go though steps 1 & 2, however when I plug the 20 pin connector in the light the blue light goes out. (no lights are on).

I updated and flashed the EVO to Firmware 74.[38]  Hardware inside 7.0  however, the the orange box says Recimmended firmware is not loaded 63.[02]  then there is a green Update to that version aside it. 

What can my issue be. Thank in advance for any help! 

Login to reply View 2 answer(s)

26/12/2019

 Ram Jeff Duhaime (180Pts.)

0

2019 RAM 2500 Push to start GAS blue light goes out after plugging in the 20 pin con (step 3)

2019 RAM 2500 Push to Start GAS

(What I wired)

THAR-CHR6 Harness:  I wired from the EVO ALL  A1  to the purple and white on the Igintion BCM module. A10 to Lt.Blue of T harness, A20 to the Lt.Blue/Black of T harness, with an OHM meter I ringed them out (they are connected). I tied the red connector  D3 & D1 together and soldeir together at the T harness as discribed.  Can 1 LOW connection C4 from the EVO to the Yellow of CAN 1 connector on the truck. Can 1 High connection C3 from the EVO to the Brown and White of CAN 1 connector on the truck. 

(plugged it the remaining plugs by the steps discribed into the EVO ALL) 

Issue I have: I go though steps 1 & 2, however when I plug the 20 pin connector in the light the blue light goes out. (no lights are on).

I updated and flashed the EVO to Firmware 74.[38]  Hardware inside 7.0  however, the the orange box says Recimmended firmware is not loaded 63.[02]  then there is a green Update to that version aside it. 

What can my issue be. Thank in advance for any help! 

Login to reply View 2 answer(s)

16/12/2019

 Ram Karl Brunner (130Pts.)

0

Solid red light does not turn to blue for step 7

have triple checked the wriing and I have 12V supply. Can High and low both 2.5V. Still when programming the module it doesnt get past step 7 with a solid red light not going to blue. Have pulled the key in and out numerous times while waiting for the lights on the dash to go out and still stuck. Anyone have any a answers that could help out?
Login to reply View 1 answer(s)

06/12/2019

 Ram ray gehre (260Pts.)

0

Truck remote starts, but horn goes off like the alarm is set off

Got my unit to start the truck, but the alarm seems like it is going off while it's running. Can't figure out why.
Login to reply View 1 answer(s)

29/11/2019

 Ram ray gehre (260Pts.)

0

Get to step 8, turn key, lights turn off but the blue light doesn’t flash.

2015 ram 1500 with regular key, have the wires plugged into the right spot, do the key program and get up to step 8, turn key, lights turn off, then the blue light is supposed to flash, but it doesn't.
Login to reply View 2 answer(s)

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue