Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

connecteur bouton start Toyota RAV4 hybride 2017

Bonjour, pouvez-vous me dire comment accéder au connecteur du bouton poussoir start du RAV4 hybride ? merci

28/12/2020

Toyota G M (14740Pts.)

0

tpms on toyota

I set evo-one to 2018 camry and 2019 rav4. On both I made a tpms connection. On both, the tire symbol flashes when remote start with 3-lock. How to find out whether or not this vehicle has a TPMS?

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

0

Send Live Commands to EVO All with a Computer

I will receive my EVO All with a t-harness soon for my Toyota Rav4 2016, Limitted.

I know how to install it and setup the 3X Lock button remote start on my Rav4.

 

However, this is what I want to do next but I don't know how. I want to connect a raspbbery pi to the Evo All, and let it to stay connected to Evo All. I want to able to send commends to Evo All, while it is connected to the car's BCM. Like I want my to tell Evo All to remote start, or lock the doors or unlock them. How can I do that?

If you don't know, where can I find documentaions on how the Evo All device is built and function? Any white paper? Or any documentation on the device itself can also be helpful.

0

Where to install remote starter antenna? Under rear view mirror/camera?

I have a 2018 Toyota RAV4 Hybrid and I've successfully installed the EVO-ONE and it works perfect.  I'm now adding an RFK912 RF kit.

 

Where is the best place to install the antenna?

 

Usually it's placed at the center of the windshield behind the rear view mirror, but the RAV4 has a camera/radar box there.  Can I safely remove the box and install the antenna inside it?  Should I place the antenna outside (and next to) the box?

 

Also, is it easy to remove the rubber around the door frame to route the antenna wire from the main ECU area (where the remote starter is) up to the rear view mirror area?

 

Thanks for any help!

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

0

Camry rav4 2019 regular key

Hi, do you have a release date for 2019 camry and rav4 wirh regular key? Heard there is a problem with the key? thank you

0

Camry rav4 2019 regular key

Hi, do you have a release date for 2019 camry and rav4 wirh regular key? Heard there is a problem with the key? thank you

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

0

2017 RAV4 Defrost

2017 RAV4 Evo-All installed. Just wondering if Can-Bus can turn on the defrost on this car? Thanks

0

FORTIN FTX-64-2W REMOTES FLASHES RED

I have a simple question. I have a 2015 Toyota Rav4 with a Fortin EVO remote start which works fine. I'm just wondering when pressing the remote start button on the remote it's supposed to light up green when it communicates with the remote start showing that it was a successful start. Well the car starts with no problem, but the remote flashes red as if it didn't start. Why doesn't it ever flash green if the car starts successfully? Should I be concerned? Thanks. Brian

23/01/2018

Toyota G M (14740Pts.)

0

pins RX/TX for toyota lexus

On which address can I buy PIN RX-TX, FOR CONNECTION OF TOYOTA / LEXUS cars? I mean ebay or amazon. And, here's a photo. https://1zr.ru/obhodchiki-immobilajzerov/idatalink-toyota-lexus-rx-tx.html

0

OEM key fob not working while 2017 Rav4 is remote started

I hooked up my Evo-One for remote start only (using my OEM key fob, 3x lock button) on my 2017 Toyota Rav4 H-hey and it starts up fine but it will not allow me to unlock my vehicle once it is remote started. All of my wires are hooked up correctly, per guide #58371 & I have the C1 & D2 turned on as well as the A2 off under bypass programming and 38.2 selected under the auto-start programming. I assume it is a programming issue, something is either on that isn't supposed to be or I have something off that isn't supposed to be. The TPMS wire is also cut and not touching and the Lt.Blue "data door lock" wire is hooked up correctly. Help please.

0

2017 Rav4 H Key will not start unless unlocked from factory keypad first

Evo all and 4105 avital remote start. 2017 toyota rav4 h-key. evo all programmed perfect, and remote starts perfect. diabled trunk option in evoall options, enabled unlock before start/lock after start. Everything works and car starts perfect. Except If i arm system with factory remote and then try to start, the car will just crank and not start. If i unlock the car with the factory remote before start the car will start everytime. even though the evo unlocks the car before start it wont work unless i do it with the factory remote first.

0

Evo-One will not learn key or red stuck on after 10 flashes (2006 rav4 limited FWD)

can not get the red led to turn off after the key has been programmed .I have used connection 1 and programming 1 of the guide for this vehicle.I have triple checked all my wirirng and all is good. Does the rav4 need something special for the key.My key has a "G" molded into the plastic part close to the RF ID chip? Am I missing something? Without the key programmed I can't test if the vehicle will start? The vehicle does start normally, just not tte 3X lock to start? I also checked to make sure all the correct parameters are loaded for this year of vehicle. Any help Please, so fustrated :(

0

Evo-All and Viper remote start Not working -2016 Toyota Rav4 - Evo-All Solid Red light

I finally had time this evening to install the remote starter but i believe the bypass is faulty.  I used the instruction provided in fortin website using the code(as usual).  I connected as is exactly as in the diagram..

- Hardwired wires from evo-all to Viper 5305 module as per dotted lines in the diagram....no more, no less.  

- Cut red and black wire of Datalink cable,  then connected Red to 12v and black to ground.  

- From Evo-all Connected Yellow(Ignition), Lt Blue/black(IMMO Data, Green/red(driver hoodpin and Lt Blue(Door lock data) as per diagram.

- Programmed the Evo-all as per instruction(it seems it worked according to Flash pattern in the diagram instruction.

-  I pressed lock/arm in Viper remote,  transponder and viper module communicates no problem which i can see on the viper's  antenna LED and siren chirps as it should.  even unlock button works as well between transponder and Viper module.

 

 

Now the problem........

- nothing happens to OEM arm/disarm when lock/unlock is pressed on the transponder.

- nothing happens to Door's lock/unlock  when lock/unlock is pressed on the transponder.

- no crank when remote start is pressed.  But transponder shows it did send the signal.

- when Viper is armed,  I can open any of the doors and alarm won't sound nor security system work.

- i know Viper is Working fine because when it's armed and start the engine using Key,  it didn't crank and alarm sounded...loud.

-  also,  no parking lights flashing or turning on.  But if i connect the Parking light from Viper to car instead of through evo-all,  then parking lights works.

 

After couple of hours trying all the tests  I know the module is not sending any info to either Car or Viper module.  I did a little more test by arming OEM security using car's FOB,  armed Viper by pressing lock,  then tried to remote start and voila,  it would crank but won't continue because the evo-all bypass seems not bypassing.  I reset/re-programmed  the module then suddenly all i got is solid Red bottom light.  It stays Red even after unplugging every wires then re-plugging it the datalink by itself.  It won't re-set anymore. 

0

connecteur bouton start Toyota RAV4 hybride 2017

Bonjour, pouvez-vous me dire comment accéder au connecteur du bouton poussoir start du RAV4 hybride ? merci

0

fils rx et tx sur rav4 hybrid 2016

ou se trouve les fils rx et tx? car sur mon rav4, a l emplacement indiquer ces fils n existe pas

0

Where is the TPMS wire in a 2016 Rav4

The guide says it is a 20 pin blue connector in the driver kick pannel. Wire color is light brown. There is no light brown wire. The vehicle remote starts but the locks do not operate once it is remote started and it also does not shut off with the fob. It uses a key ignition.

0

Programming EVO-ONE for 2012 Toyota Rav4, Won't recognize key

I'm installing an EVO-ONE with the THAR-TOY1 T-Harness into a 2012 Toyota Rav4 and I believe I have followed the wiring diagram to set it up correctly. When I go to do the key bypass programming, I get to the step when I put my key in and turn the ignition to ON. Instead of the blue AND red light flashing, ONLY the red light flashes rapidly and doesn't stop. PLEASE HELP!

0

Programming EVO-ONE for 2012 Toyota Rav4, Won't recognize key

I'm installing an EVO-ONE with the THAR-TOY1 T-Harness into a 2012 Toyota Rav4 and I believe I have followed the wiring diagram to set it up correctly. When I go to do the key bypass programming, I get to the step when I put my key in and turn the ignition to ON. Instead of the blue AND red light flashing, ONLY the red light flashes rapidly and doesn't stop. PLEASE HELP!

0

where is the RX Data and TX Data plug for wires

I have a 2009 rav4 and i am installing the key-override-all for my remote starter the purple/white and yellow/black wire go to a plug I cannot find. (rx and tx data)... I have the wire color print out with a picture that just shows a black 7 pin plug picture #4 i still have NO idea where it is. please help...

0

toyota H key coverage

is there a evoall version to bypass toyota H key (corolla 14+, highlander 14+, yaris hb 15, rav4 13+) coming soon??? instead of using tb-rav4 and highlander pts 14-15??? thanks

19/05/2014

Toyota (Pts.)

0

Flashing blue light in windshield not as bright, very weak when armed - why and what do I do?

I HAVE THE FSA-206/FSA-208/FSA-209/NANO START USER GUIDE.

1

2010 RAV4 EVO ALL SAME INSTALL AS 2011 RAV4 POSSIBLE

Can i use the same install on a 2010 rav4 as i would a 2011 rav4 the unit i want to install is an evo all. can i use

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue