I have a 2015 Corolla with an automatic transmission start button. 

Installed with THAR-TOY6 T-Harness & EVO ALL

The device flashes blue when opening or closing the doors, but when trying to operate it with the remote, it flashes 4 red, I keep trying to program it and it gives me 3 red flashes.

SN:001A07261560

Flash blue once before red flashes

Please see the attached video.

https://photos.app.goo.gl/6rfod5uAwRBQ7MgUA

Can you reset the two device please

SN:001A07157086

SN:001A07261560

I have a 2015 Corolla with an automatic transmission start button. 

Installed with THAR-TOY6 T-Harness & EVO ALL

The device flashes blue when opening or closing the doors, but when trying to operate it with the remote, it flashes 4 red flashes.

Flash blue once before red flashes

Please see the attached video.

https://photos.app.goo.gl/6rfod5uAwRBQ7MgUA

What feature will I benefit from when connecting the purple and purple/white wires? Can I close and open the doors while the engine is running, 

and can I open the door after starting the vehicle with the remote without stopping the engine when connecting the yellow/black wires?

https://fortin.ca/download/90691/evo-all_ig_sal_bi_toy-camry_2020_pts_a_90691.pdf

Installing RFK441, but the range is very bad. The factory remote control for the car has a better range. I placed the antenna everywhere and even placed it outside the vehicle to no avail. Please, I need a solution and advice. Is there a way to solve the issue or a guaranteed replacement device? The range is all I need: 150 meters to 200 meters only.

Please see the video attached to the link

https://photos.app.goo.gl/5Wq9mcG8W9JfhPi48

reset one all, please

 SN: 001A07253349

Hello all One All was installed on the 2020 Camry Push to Start from wire to wire, but there are 3 wires that were not exactly specified to connect. The wires are specified in the attached picture

https://drive.google.com/file/d/1J7xe9EEVPgkvmqURZfsdAlbcf-SmWtN9/view?usp=sharing

evo-all_ig_sal_bi_toy-camry_2020_pts_a_90691.pdf (fortin.ca)

I would also like to reset one all, please

 SN: 001A07253349

RF kit 441 was programmed on Camry 2020. It was successful, but it is very short range, only 25 meters. What is the reason?

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

One All was installed well on camey 2020 , but the long range remote tried to program it and it was not programmed. Is it necessary to connect the cable in the attached picture

1-way RF kit with 2 4-button remotes.

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

eHello, gentlemen, one all evo was installed, but the long range remote was not programmed. I followed the instructions to no avail.. The car is a 2020 Camry Hybrid.

I need your support

https://photos.app.goo.gl/fqCaUrBN5Cd7UNXU9

Can you reset the two device please

SN:001A07253349

SN:001A07443681

I have one all that was programmed. I followed the instructions to install the long range 441 but it does not light up. I would like to reset it.
It only flashes once when plugged in

The instructions I followed are in the attached image

https://photos.app.goo.gl/gQXzvF6U7Fej7r5f6

Hello everyone, I have a 2020 Grande Camry Hybrid, and I bought a long range remote start device with one all evo and THAR-TOY13, and I connected plug to plug without cutting any cable with a flashing, but the remote start did not work

Please see the attached picture, there are signs I have put for inquiries

http://photos.app.goo.gl/Lv4woU1btxjDtxf28

Can you reset the device please 

Can you reset the device please

SN:001A07253349

SN:001A07443681

I buy FORTIN EVO ONE ALL + THAR-TOY13 + FORTIN RFK441+ fortin flashlink tools

I followed the installation instructions, but it didn't work I installed the device and made a flash, and when opening or closing the door, it flashed in blue, but when pressing 3 times to close, the remote start did not work I tried to flash the device again but it stuck in (DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR)