Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

EVO One RFK441 2010 Hyundai Tuscon, regular key. Remotes only work every so often.

Everything programmed correctly as per the guide, no issues there. The remotes, even though they are one way, seem like they are acting as a 2 way remote. Both remotes programmed correctly on initial setup. Sometimes one of the remotes will work correctly to lock and unlock the doors, the LED on the remote giving one initial flash, then 5 quick flashes and the function works on the car. Other times, you push the lock or unlock, and all you get is a single flash, and no response from the car. It is very random, sometimes it's one remote, sometimes it's the other. Sometimes when I pick up one of the remotes, I see the LED give a single flash, but I haven't pushed a button. After a period of time, they both seem to start working properly to lock and unlock the car. Once that happens, you can remote start it once. Sometimes you can shut it down with the remote, sometimes you cannot. After that, neither one of the remotes will work at all. They go back to a single LED flash when the lock or unlock is pressed. Eventually one of them will start to work, then the other.........This has to be the strangest behavior I've seen from an RF remote.

1

How can I have the EVO All RFK942 RF Kit maintain program for more than 24hrs?

2018 Toyota Rav 4 Push Start Ignition. Start X Remote Starter. EVO all RFK942 I programmed the RK Kit, but after 24hrs it drops the program. I have to keep programming the RF kit just to work again. maybe my sequence to program was not proper due to can’t find the best program instructions for a push start ignition. Please help. Thanks.

0

2022 Mazda CX5 Evo One + THAR-ONE-MAZ3 + RF 942 kit unable to open hatch with 942 remote

Unable to open hatch with the 942 remote trunk release button. Everything else is working fine. Is there a solution? 2022 Mazda CX5 Automatic Transmission

0

RF 442 Kit - 1 Remote No Sound

I installed an RF 442 kit with my EVO One. One of the remotes only blinks green to confirm commands and does not play sound like the other remote does. Is there a way to enable the sound on the remote or do I just have a dud?

1

New registration of a RF-442 kit on an installed EVO-ONE with THAR-TOY8 kit

I have followed the intruction to the letter, but the problem i run into is that to set the remote programming mode, you have to press the antenna button 5 times, hit the brake, then use a programmed remote to click the lock button (mode 1)... but I don't have a programmed remote, because it's a new install. How am I supposed to use a programmed remote to enter remote program mode when I have brand new remotes that need programmed? I have the EVO-ONE programmed to use the antenna remote, and it is also flashed to use the OEM remote, which is working perfectly. I just want the extended range because the OEM range is NO bueno BAD. Vehicle is 2018 Toyota Corolla LE with H-key

27/10/2023

Nissan Moike (580Pts.)

0

rf 442 programming guide for evo one

I've been trying to add rf442 to my nissan rogue , Once the atenna starts to flash I press the [+] button follow by the lock button, but the remote doesnt program. Am I pressing the wrong buttons? Thanks

0

Linkr-lt2 and Fortin rf kit?

Has this combo ever been fixed to work again? Or is capitalism still keeping the fix from ever happening?

11/02/2024

FAQ Stack316 (290Pts.)

0

RFK442 evo one only able to connect 1 of the 2 remotes

I have been able to setup one RFk442 remote but when I try to program the 2nd one it does not work and get red flashing lights. Anything special to get both programmed?

0

How to reprogram Fortin RF 411 to new EVO-ALL

Hello, I started having an issue 2 year after installing the evo-all unit where it would not respond using the oem remote or the Fortin 411 remote. The unit work perfectly for 2 years before this and what i noticed is that i could remove the fuse in the T-Harness and put it back in and the unit would work fine for a few days and then would stop responding again. I had a spare EVO-ALL unit laying around, so i flashed it to the vehicle, programmed it to the vehicle and then tried reprograming the previously installed Fortin 411 RF KIT to the new EVO-ALL unit and i can get the module into program mode and the light on the antenna will flash rapidly but the remotes will not re-pair to the antenna. The light on the remotes flash as normal, the lights on the antenna continue to flash and the lights on the module continue to flash waiting for the remotes to be paired. Is there any way around this or am i stuck having to get new remotes and/or RF kit? Vehicle: 2014 Chrysler 200 Fortin EVO-All SN: 001A07 471052 Fortin 411 RF KIT Using T-Harness

1

New registration of a RF-442 kit on an installed EVO-ONE with THAR-TOY8 kit

I have followed the intruction to the letter, but the problem i run into is that to set the remote programming mode, you have to press the antenna button 5 times, hit the brake, then use a programmed remote to click the lock button (mode 1)... but I don't have a programmed remote, because it's a new install. How am I supposed to use a programmed remote to enter remote program mode when I have brand new remotes that need programmed? I have the EVO-ONE programmed to use the antenna remote, and it is also flashed to use the OEM remote, which is working perfectly. I just want the extended range because the OEM range is NO bueno BAD. Vehicle is 2018 Toyota Corolla LE with H-key

25/11/2023

Ford Ben308 (130Pts.)

0

No crank on 06 Ford Focus (Evo One and RM442 Remotes)

Using the 1 key with Decryptor method, I programmed my evo one and paired the key fobs to the antenna, but when I try to remote start, it doesn't crank. It's sending power to the ignition and the anti-theft is not blinking so I think the bypass is working, just not sure why it doesn't crank. I should also add that the fob doesn't work to lock/unlock the doors, nor does it open the trunk. The antenna and module are clearly receiving commands but aren't able to do anything with them. I'm confused how this is supposed to work anyway, as the installation guide doesn't have me splicing lock signal wires to the module. Is it supposed to send the lock/unlock signal through the RX wire at the ignition cyclinder? I have a basic level of experience with electronics but I'm stumped here. Thanks in advance for your help.

27/10/2023

Nissan Moike (580Pts.)

0

rf 442 programming guide for evo one

I've been trying to add rf442 to my nissan rogue , Once the atenna starts to flash I press the [+] button follow by the lock button, but the remote doesnt program. Am I pressing the wrong buttons? Thanks

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

0

1-way RF kit with 2 4-button remotes very short range

RF kit 441 was programmed on Camry 2020. It was successful, but it is very short range, only 25 meters. What is the reason?

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

0

1-way RF kit with 2 4-button remotes.

One All was installed well on camey 2020 , but the long range remote tried to program it and it was not programmed. Is it necessary to connect the cable in the attached picture

1-way RF kit with 2 4-button remotes.

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

29/06/2023

Ford smrick2 (190Pts.)

0

Why does it only honk now when I remote start

Installed evo all with my car telematics with 944 rf kit and has worked beautifully since 2019 with the occasional horn honking when I remote start but I had to remove module and wiring from dash for some audio upgrades now all it does is honk the horn when I try to remote start. Does not try to crank everything powers up as it should then nothing. Thats on first attempt 2nd attempt does even do that. I have since go in and tried to reprogram module as t

29/06/2023

Ford smrick2 (190Pts.)

0

Why does it only honk now when I remote start

Installed evo all with my car telematics with 944 rf kit and has worked beautifully since 2019 with the occasional horn honking when I remote start but I had to remove module and wiring from dash for some audio upgrades now all it does is honk the horn when I try to remote start. Does not try to crank everything powers up as it should then nothing. Thats on first attempt 2nd attempt does even do that. I have since go in and tried to reprogram module as t

0

Will any other fobs work with fortin systems?

I'm getting an Evo one setup for my car. I was curious as to if any other RF system will work with Fortin modules. Because there are some viper systems that go up to 5 mi. While the Fortin system only does 1.1. but the Fortin systems are direct integration while the viper systems throw a whole bunch of codes.

0

Which fortin remotes will work together?

Which fortin remotes will work together? i.e. rf642 and rf442 or do they only work with the series number? I.e. rf642 and Rf641 will work together and rf442 and rf441 will work together? Is there a guide to which ones work together? thanks jay

0

Evo All w/Xl202 - Do we need to enable option b2 and swap rx/tx?

2019 Chevy Express - Evo All w/ directed XL202 as the RF kit - Using the Evo ALL as alarm and RS with an existing viper FOB (and OEM remote as a backup) I noticed an option b2 in flashlink that vague and mentions changing the input/output of the antenna for different RF kits Does this mean we can enable this and NOT need to swap the white and blue on the data cable? Or do we leave that option alone and swap the wires? Or both? Trying to avoid figuring this out with trial and error before my install in a couple days.

0

Enable RF kit on evo-all in Audi q5 2010

Hi I installed evo-all with T harnes(THAR-aud1) and RF kit ( evo-start2 ) in audi q5 2010. The remot starter works and starts the car with pushing 3 times the lock button with oem key fob but when i send commend through applaction to start the car it doesnot work. The green light turns on in Antena but changes to orange and car doesnot start. My qustion is if the yellow wire inT-harnes of antena should be connected to the ingnition wire of the car ? if yes ,where is the ignition+ in my car ?Thanks

0

RFK442 not programming with Evo One for a 2009 RAV4 using HAR-ONE- TOY1 harness

I have programmed and installed an Evo-One using THAR-ONE- TOY1 harness in my 2009 Toyota RAV4, automatic transmission, standard key (dot key). Module S/N: 002B04211739, https://photos.app.goo.gl/gBSQdCrRweH1cRnC7   Bypass Firmware: 79.49, https://photos.app.goo.gl/PbEQgYMP1RPx6PgA8 Remote starter firmware: 1.25, https://photos.app.goo.gl/DkLyv2ttWCip77wS7   I have double checked the wiring connections, and seems everything is good.   Image 1: https://photos.app.goo.gl/uPvX8uTQnyqcuEyU9, Image 2: https://photos.app.goo.gl/TH6jQ8A2BPpa6H7P9 I can start the car remotely using the OEM keys. I would like to use the RFK442. I have tried to programming/pairing the RFK442, unfortunately I could not able to proceed after steps 3, page 2 in the following RFK442 programming manual.    https://fortin.ca/download/68451/rfk442-install-guide-68451.pdf The problem is: at step 3, the antena LED blinks once and then goes away (but the instruction says "The LED will turn ON").  At step 4, when I press the brake paddle 4 times, the antena LED doesn't response or no rapid flashing (instruction says "The LED will flash rapidly"). It seems like the RFK442 can not communicate with the Evo One.  I appreciate if you have any suggestion to overcome this issue and complete programming the RFK442 with the Evo One.  

0

RFK442 not programming with Evo One for a 2009 RAV4 using HAR-ONE- TOY1 harness

I have programmed and installed an Evo-One using THAR-ONE- TOY1 harness in my 2009 Toyota RAV4, automatic transmission, standard key (dot key). Module S/N: 002B04211739, https://photos.app.goo.gl/gBSQdCrRweH1cRnC7   Bypass Firmware: 79.49, https://photos.app.goo.gl/PbEQgYMP1RPx6PgA8 Remote starter firmware: 1.25, https://photos.app.goo.gl/DkLyv2ttWCip77wS7   I have double checked the wiring connections, and seems everything is good.   Image 1: https://photos.app.goo.gl/uPvX8uTQnyqcuEyU9, Image 2: https://photos.app.goo.gl/TH6jQ8A2BPpa6H7P9 I can start the car remotely using the OEM keys. I would like to use the RFK442. I have tried to programming/pairing the RFK442, unfortunately I could not able to proceed after steps 3, page 2 in the following RFK442 programming manual.    https://fortin.ca/download/68451/rfk442-install-guide-68451.pdf The problem is: at step 3, the antena LED blinks once and then goes away (but the instruction says "The LED will turn ON").  At step 4, when I press the brake paddle 4 times, the antena LED doesn't response or no rapid flashing (instruction says "The LED will flash rapidly"). It seems like the RFK442 can not communicate with the Evo One.  I appreciate if you have any suggestion to overcome this issue and complete programming the RFK442 with the Evo One.  

0

change my RFK 442 for a RFK 942?

I live on the fifth level of a building, and my car is on level 1, the RFK does not work for me from home (I am less than 15 meters from my vehicle but there are many walls). Could this be solved with an RFK942 that has a greater range? I have a RFK442.

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer