Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

How to add Excalibur RFK 42 kit

Looking to upgrade to a 2 way kit, It says the Excalibur RF 42 five button 2 way kit is compatible with evo one, does it just plug in and take place of my current 1 way 441 kit? 2008 Kia Sportage Evo-One installed

0

RFK-442 - Evo-all install without RFA2A

Hello. I am trying to install an EVO-All with GMT1V2 T-harness in a 2014 chevrolet cruze. (remote starter is programmed and works with OEM remote) I have an RFK-442 kit I would like to install without the RFA2A adapter. I have 12v and ground present at the datalink from the t-harness. Am I wrong to believe that the antenna kit can wired into the Datalink plug? I have wired it as such, When I plug in the antenna. the LED will light for a second. but when I follow the RF kit learning prcedure for the EVO-All. the antenna LED does not respond. Is the RFA2A really required? Thanks

1

NISSAN ROGUE SPORT

I HAVE INSTALLED THE EVO ALL IN MY NISSAN ROGUE SPORT WITH THE AVAIABLE T HARNESS BUT I RAN INTO AN ISSUE AFTER PROGRAMMING AND DECRYTPING IN FLASH LINK I WENT BACK TO THE VEHICLE TO INSTALL AND I CANNOT GET MY RFK411 TO START THE VEHICLE ALL IT DOES IS OPEN AND CLOSE VEHICLE OFF DOORS CLOSED OUTSIDE THE VEHICLE JUST EONT START STEPS IVE COMPLETED ARE INTSALLED PROGRAMING AND KEY DECRYPTION THE VEHICLE HAS AN ALARM SYSTEM PREINSTALLED PLEASE UPDATE ME ASAP ON THIS IF IT CANNOT WORK I ILL SEND THE EUIPMENT BACK ITS VERY EXPENSIVE. Just an update I now took the evo all out flash link it change a settings save it and reinstall it to the car and now it can start but when I'm from a distance the starter cranks continuous and then shuts off and the alarm goes off any fix for this

0

2017 Nissan Rogue Sport after start

I have an Evo all installed on a Nissan Rogue Sport 2017 I can remote start with the rfk411 antenna kit it all works the thing is that if I accidentally start or start without getting to the vehicle in time in shuts down which i chose in the setting but the alarm will go off after the shutdown any help thanks.

1

2005 Toyota Camry Starts but factory alarm gose off

Hello Everone We installed a EVO One Sin# 002B04690023 with 411 RF kit on this 05 Camry with installation guide # 84961 we folowed it to a T the vehicle starts fine but when the factory alarm sets it gose off with it running. Do we forget or need to set something in the evo one to disable or bypass the alarm we can't find any setings for this Please help. Thanks,

0

RFK912 on evo all works fine and starts, but after 24 hours, the remotes will not work until fobs are reprogrammed.

I have an evo all on my 2023 tacoma PTS. Installed the unit fine and works fine with factory fob. I installed the RFK912 kit to it followed programming directions and was able to successfully program my two remotes and those remotes work fine to remote start for about a day, then they stop working. factory remote starts the truck fine but RFK912 remotes no longer work. I have to reprogram the remotes to the evo all and they start working again for about a day, then they or the unit lose programming and I have to relink again. What am I doing wrong? Units were both brand new so Im thinking the batteries should be fine. Is there a step Im missing?

0

I lost one of my Fortin RFK441 remotes. Can I purchase anoter one and program it to my RFK441 Antenna?

I have the evo-one on a 2020 Chevy Equinox. Everything works, but I lost one set of my keys. I need a replacement remote. I only have one of the original remotes left.

0

Does the NISSAN NIST4 wiring harness require an RF-A2A adapter for a 942 remote kit?

It looks like the NIST4 harness is already rigged up for the Fortin remote kits based on the blue plug that is present? Or does it still require the RFa2A adapter cable to properly split the serial data?

0

EVO One RFK441 2010 Hyundai Tuscon, regular key. Remotes only work every so often.

Everything programmed correctly as per the guide, no issues there. The remotes, even though they are one way, seem like they are acting as a 2 way remote. Both remotes programmed correctly on initial setup. Sometimes one of the remotes will work correctly to lock and unlock the doors, the LED on the remote giving one initial flash, then 5 quick flashes and the function works on the car. Other times, you push the lock or unlock, and all you get is a single flash, and no response from the car. It is very random, sometimes it's one remote, sometimes it's the other. Sometimes when I pick up one of the remotes, I see the LED give a single flash, but I haven't pushed a button. After a period of time, they both seem to start working properly to lock and unlock the car. Once that happens, you can remote start it once. Sometimes you can shut it down with the remote, sometimes you cannot. After that, neither one of the remotes will work at all. They go back to a single LED flash when the lock or unlock is pressed. Eventually one of them will start to work, then the other.........This has to be the strangest behavior I've seen from an RF remote.

1

How can I have the EVO All RFK942 RF Kit maintain program for more than 24hrs?

2018 Toyota Rav 4 Push Start Ignition. Start X Remote Starter. EVO all RFK942 I programmed the RK Kit, but after 24hrs it drops the program. I have to keep programming the RF kit just to work again. maybe my sequence to program was not proper due to can’t find the best program instructions for a push start ignition. Please help. Thanks.

0

2022 Mazda CX5 Evo One + THAR-ONE-MAZ3 + RF 942 kit unable to open hatch with 942 remote

Unable to open hatch with the 942 remote trunk release button. Everything else is working fine. Is there a solution? 2022 Mazda CX5 Automatic Transmission

0

RF 442 Kit - 1 Remote No Sound

I installed an RF 442 kit with my EVO One. One of the remotes only blinks green to confirm commands and does not play sound like the other remote does. Is there a way to enable the sound on the remote or do I just have a dud?

1

New registration of a RF-442 kit on an installed EVO-ONE with THAR-TOY8 kit

I have followed the intruction to the letter, but the problem i run into is that to set the remote programming mode, you have to press the antenna button 5 times, hit the brake, then use a programmed remote to click the lock button (mode 1)... but I don't have a programmed remote, because it's a new install. How am I supposed to use a programmed remote to enter remote program mode when I have brand new remotes that need programmed? I have the EVO-ONE programmed to use the antenna remote, and it is also flashed to use the OEM remote, which is working perfectly. I just want the extended range because the OEM range is NO bueno BAD. Vehicle is 2018 Toyota Corolla LE with H-key

27/10/2023

Nissan Moike (580Pts.)

0

rf 442 programming guide for evo one

I've been trying to add rf442 to my nissan rogue , Once the atenna starts to flash I press the [+] button follow by the lock button, but the remote doesnt program. Am I pressing the wrong buttons? Thanks

0

Linkr-lt2 and Fortin rf kit?

Has this combo ever been fixed to work again? Or is capitalism still keeping the fix from ever happening?

11/02/2024

FAQ Stack316 (290Pts.)

0

RFK442 evo one only able to connect 1 of the 2 remotes

I have been able to setup one RFk442 remote but when I try to program the 2nd one it does not work and get red flashing lights. Anything special to get both programmed?

0

How to reprogram Fortin RF 411 to new EVO-ALL

Hello, I started having an issue 2 year after installing the evo-all unit where it would not respond using the oem remote or the Fortin 411 remote. The unit work perfectly for 2 years before this and what i noticed is that i could remove the fuse in the T-Harness and put it back in and the unit would work fine for a few days and then would stop responding again. I had a spare EVO-ALL unit laying around, so i flashed it to the vehicle, programmed it to the vehicle and then tried reprograming the previously installed Fortin 411 RF KIT to the new EVO-ALL unit and i can get the module into program mode and the light on the antenna will flash rapidly but the remotes will not re-pair to the antenna. The light on the remotes flash as normal, the lights on the antenna continue to flash and the lights on the module continue to flash waiting for the remotes to be paired. Is there any way around this or am i stuck having to get new remotes and/or RF kit? Vehicle: 2014 Chrysler 200 Fortin EVO-All SN: 001A07 471052 Fortin 411 RF KIT Using T-Harness

1

New registration of a RF-442 kit on an installed EVO-ONE with THAR-TOY8 kit

I have followed the intruction to the letter, but the problem i run into is that to set the remote programming mode, you have to press the antenna button 5 times, hit the brake, then use a programmed remote to click the lock button (mode 1)... but I don't have a programmed remote, because it's a new install. How am I supposed to use a programmed remote to enter remote program mode when I have brand new remotes that need programmed? I have the EVO-ONE programmed to use the antenna remote, and it is also flashed to use the OEM remote, which is working perfectly. I just want the extended range because the OEM range is NO bueno BAD. Vehicle is 2018 Toyota Corolla LE with H-key

25/11/2023

Ford Ben308 (130Pts.)

0

No crank on 06 Ford Focus (Evo One and RM442 Remotes)

Using the 1 key with Decryptor method, I programmed my evo one and paired the key fobs to the antenna, but when I try to remote start, it doesn't crank. It's sending power to the ignition and the anti-theft is not blinking so I think the bypass is working, just not sure why it doesn't crank. I should also add that the fob doesn't work to lock/unlock the doors, nor does it open the trunk. The antenna and module are clearly receiving commands but aren't able to do anything with them. I'm confused how this is supposed to work anyway, as the installation guide doesn't have me splicing lock signal wires to the module. Is it supposed to send the lock/unlock signal through the RX wire at the ignition cyclinder? I have a basic level of experience with electronics but I'm stumped here. Thanks in advance for your help.

27/10/2023

Nissan Moike (580Pts.)

0

rf 442 programming guide for evo one

I've been trying to add rf442 to my nissan rogue , Once the atenna starts to flash I press the [+] button follow by the lock button, but the remote doesnt program. Am I pressing the wrong buttons? Thanks

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

0

Compustar Pro T13

I have (and probably others) been using Compustar T11/T12-type remotes on an EVO-ONE without issue, even though this isn't an officially supported configuration. Now Compustar has the Pro T13. I bet this would work also, but I don't feel like being the guinnea pig, but I'd certainly like to use this remote -- So, has any installer tried this yet?

0

1-way RF kit with 2 4-button remotes very short range

RF kit 441 was programmed on Camry 2020. It was successful, but it is very short range, only 25 meters. What is the reason?

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

0

1-way RF kit with 2 4-button remotes.

One All was installed well on camey 2020 , but the long range remote tried to program it and it was not programmed. Is it necessary to connect the cable in the attached picture

1-way RF kit with 2 4-button remotes.

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

29/06/2023

Ford smrick2 (190Pts.)

0

Why does it only honk now when I remote start

Installed evo all with my car telematics with 944 rf kit and has worked beautifully since 2019 with the occasional horn honking when I remote start but I had to remove module and wiring from dash for some audio upgrades now all it does is honk the horn when I try to remote start. Does not try to crank everything powers up as it should then nothing. Thats on first attempt 2nd attempt does even do that. I have since go in and tried to reprogram module as t

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer