English
Mon compte Créer un compte
English
EVO-START Wirecolor

Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

TOTAL ESTIMÉ :

Commander

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

Réinitialiser
Réduire tout
Tout développer
Réinitialiser
Réduire tout
Tout développer
picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question
LES + RECENTS A VOIR! LES + NOTÉÉS LES + RÉPONDUES LES + VUES

09/12/2023

 Nissan mobilesolutionsar (280Pts.)

0

Does the lock and unlock wires go into the listed empty slots on a 2019 Nissan Armada using the Evo-Nist1?

The guide says that the lock and unlock wires go into an empty slot.
Connectez-vous pour répondre Voir 1 réponse(s)

22/11/2023

 Nissan Ramiro86 (300Pts.)

0

2022 Nissan Rogue remote start push start

I am installing a remote start to a 2022 Nissan Rogue, the installation guide says that 1 key will be sacrificed in the installation and the key in a box, I don't understand what that means, nor about sacrificing the key, nor about the key in the box, I need if someone could help me with that, thank you very much
Connectez-vous pour répondre Voir 1 réponse(s)

13/08/2021

 Nissan Ahmed Aboushouk (330Pts.)

0

Nissan Qashqai 2019 Steering Lock Plug wiring

I have successfully installed standalone evo one for nissan qashqai 2019 with push to start When i remote start the vehicle and then enters inside it then when i press the Ignition so i can start diving, car refuses to accept ignition saying steering is locked and doesnot allow car to be on the ON position I have tried enabling door shutdown option and it actually shutdown car when any door is opened So in the current setup , i have to press brake after entering then it shutdowns then i start it normally again I saw something about steering lock plug connector but i donot know which wires in the A plug harrness to connect to ? I have a white/green wire but there is no white/red Please assist me as i want to start driving directly after entering the vehicle
Connectez-vous pour répondre Voir 1 réponse(s)

02/12/2020

 Nissan Wesley Bridges (140Pts.)

1

2015 Nissan Altima Ignition Ignition 2 wire

Not a question so much as an update to your notes. On the installation instructions it shows Ignition 2 as Pin 9 Black 24 Pin plug as a Pink wire. Vehicle I had it is not a Pink Wire it is Brown but when tested goes + when PTS is hit for ACC or IGN.
Connectez-vous pour répondre Voir 1 réponse(s)

28/07/2020

 Nissan rob Buchanan (130Pts.)

0

Can’t open the doors once vehicle remote started

Hi there, can you please confirm the correct installation and programming sheets for my set up please. 2006 Nissan Pathfinder (Thai made) evo one t harnes 2 stand alone RF 64 2W I have eventually been able to program it, i can remote start with the Orem key and the RF 64,s. However once running I can't operate the doors until I turn off the vehicle.
Connectez-vous pour répondre Voir 1 réponse(s)

12/12/2019

 Nissan SPLaudio (180Pts.)

0

2016 VERSA NOTE STD KEY - NO TRANSPONDER, UNABLE TO PROGRAM EVO-ONE

This 2016 Nissan Versa Note doesn't seem to have a transponder. Transpoder connector isn't located at the key cylinder as shown in install diagram. Wired everything up as shown for install diagram, but didn't connect the RX or TX connections as the transponder wires aren't there. I can't get it to program. Getting stuck on the 5th step of programming. The 5th step starts with the yellow LED solid and you turn key to ON/RUN and the red LED should light alongside the yellow. I'm not getting that red LED lit.

I went into the settings and turned off the transponder for the Evo-One but still having the same issues. Super basic install. Any help would be much appreciated.

Connectez-vous pour répondre Voir 2 réponse(s)

12/12/2019

 Nissan SPLaudio (180Pts.)

0

2016 VERSA NOTE STD KEY - NO TRANSPONDER, UNABLE TO PROGRAM EVO-ONE

This 2016 Nissan Versa Note doesn't seem to have a transponder. Transpoder connector isn't located at the key cylinder as shown in install diagram. Wired everything up as shown for install diagram, but didn't connect the RX or TX connections as the transponder wires aren't there. I can't get it to program. Getting stuck on the 5th step of programming. The 5th step starts with the yellow LED solid and you turn key to ON/RUN and the red LED should light alongside the yellow. I'm not getting that red LED lit.

I went into the settings and turned off the transponder for the Evo-One but still having the same issues. Super basic install. Any help would be much appreciated.

Connectez-vous pour répondre Voir 2 réponse(s)

23/11/2019

 Nissan SALEH QAWASMEH (180Pts.)

0

Evo all - Nissan Altima 2010 PTS THAR-NIS1

After finishing all the programming steps red and yellow lights ON and OFF 3x Nothing happened
Connectez-vous pour répondre Voir 2 réponse(s)

23/11/2019

 Nissan SALEH QAWASMEH (180Pts.)

0

Evo all - Nissan Altima 2010 PTS THAR-NIS1

After finishing all the programming steps red and yellow lights ON and OFF 3x Nothing happened
Connectez-vous pour répondre Voir 2 réponse(s)

28/10/2019

 Nissan Justin Stroud (270Pts.)

0

2018 Nissan Frontier Guide # 72031 - parking lights and horn, and lock/unlock

Successfully installed an Evo One with THAR-ONE-NIS2 and remote start is working. In the guide, it points to the hill assist button to tap into the parking lights, I do not have that button, and I could not find the plug near there to tap into it. Is there another option? I also have no horn when arming / disarming / starting. The guide doesn't mention one, is it possible to have this? Locking with the remote works, but unlocking can usually takes hitting the button twice. Is this normal, or do I need to triple check my connections? I ran the purple and purple-white wires to the lock/unlock wires in the driver side kick panel.
Connectez-vous pour répondre Voir 1 réponse(s)

15/01/2018

 Nissan Brian Laroche (140Pts.)

1

2011 Altima PTS 'No Key' on Instrument Cluster

    2011 Altima Push-To-Start Using T-harness.  Connected to OBDII, Brake Pedal, Keybox.  Tapped into Brown wire on push-to-start button. A1-A11, C1, D1, D1.2, D3 Enabled Latest firmware for flasher and EVO-ALL

Went through programming sequence (with battery out of FOB).  Sequence completed sucessfully ending with rapid-flashing yellow light.  When activated with FOB inside vehicle, it starts fine with the 3x lock press.  With FOB removed from vehicle, 3x lock press does not start vehicle.  Vehicle displays "No key" message on instrument cluster.  

I have tried to re-flash and re-program the EVO-ALL multiple times, all with identical results.  

What am I missing here?

Connectez-vous pour répondre Voir 1 réponse(s)

15/01/2018

 Nissan Brian Laroche (140Pts.)

1

2011 Altima PTS 'No Key' on Instrument Cluster

    2011 Altima Push-To-Start Using T-harness.  Connected to OBDII, Brake Pedal, Keybox.  Tapped into Brown wire on push-to-start button. A1-A11, C1, D1, D1.2, D3 Enabled Latest firmware for flasher and EVO-ALL

Went through programming sequence (with battery out of FOB).  Sequence completed sucessfully ending with rapid-flashing yellow light.  When activated with FOB inside vehicle, it starts fine with the 3x lock press.  With FOB removed from vehicle, 3x lock press does not start vehicle.  Vehicle displays "No key" message on instrument cluster.  

I have tried to re-flash and re-program the EVO-ALL multiple times, all with identical results.  

What am I missing here?

Connectez-vous pour répondre Voir 1 réponse(s)

06/12/2018

 Nissan Michael Charleton (130Pts.)

0

Installed evo all on 2014 maxima after successfully programming yellow and red led's alternate flashing .

001a06820753 hardware vr.6 firmware vr.72.19 pre loaded
Connectez-vous pour répondre Voir 1 réponse(s)

10/10/2018

 Nissan yehuda flam (410Pts.)

0

using a diode for stand alone installation

guide #66611 for evo all stand alone install shows that i need 2 diodes to connect positive ignition wire, which way should i install the diode?
Connectez-vous pour répondre Voir 1 réponse(s)

10/04/2018

 Nissan ronaldgora (430Pts.)

0

Where do I connect wires A2, A3, and A13 from THAR-NIS1?

I have a 2014 Nissan Maxima SV Push-to-start; will be using OEM key fob; plan to install Evo-All NIST1 with T-harness (THAR-NIS1); using guide # 24031. My question is where do I connect the following wires (page 4, guide # 24031): A2 [Purple IN; Lock (-)] A3 [Purple/white IN; Unlock (-)] A13 [Yellow/Black IN; External input (-)] Thank you.
Connectez-vous pour répondre Voir 1 réponse(s)

09/04/2018

 Nissan ronaldgora (430Pts.)

0

Which is the correct installation guide for 2014 Nissan Maxima SV Push-to-start?

I purchased the Evo-All Nist1 my for 2014 Nissan Maxima SV Push-to-start. Which is the correct installation guide; #24031 or # 22271? What is the difference between the two guides anyway? Thanks
Connectez-vous pour répondre Voir 1 réponse(s)

13/03/2018

 Nissan BKinNH (180Pts.)

0

Which are proper diodes and fusible link for 2013 Nissan Juke?

Getting ready to install EVO-ALL, and NIST-1 on a 2013 Nissan Juke with PTS. I need to know the proper diodes and fusible link ratings, before I get started. I also think that including these parts with your kits would be a great idea, to make it easy for us DIYers. Thanks.
Connectez-vous pour répondre Voir 1 réponse(s)

15/01/2018

 Nissan Wayne Merkel (140Pts.)

1

What Equipment is needed for a 2008 Nissan Altima PTS

I puchased the EVO-ALL with the THAR-NIS1. The directions are a litte misleading to me, the application guide shows this as being able to be used as a standalone remote starter. However the instructions show a seperate remote start as being needed. It shows I also need a seperate RF kit for that particular year Altima, however I see other technical questions being asked and the people are using the factory keyfob and are pressing lock 3x to remote start.
Connectez-vous pour répondre Voir 1 réponse(s)

09/10/2017

 Nissan G M (14940Pts.)

0

2013 NISSAN JUKE STAND ALONE

Hello. A question. In the past year I installed evo-all (stand alone) on the 2013 nissan juke PTS and everything was fine. Yesterday, too, I installed evo-all again at 2013 juke, but did not start without pressing the brake pedal. Two days of suffering. Then I noticed that the car did not start on the first pressing of the brake pedal and on the PTS. At the same time, only the ignition was opened, and on the second press it was started. And, without a brake, pressing only on pts, three times it was necessary to press to turn on the ignition. I had to add the relay in the brake line to the brake pedal. And, now + 12V is applied to the pedal after the ignition is turned on. Is there any solution to this issue?
Connectez-vous pour répondre Voir 1 réponse(s)

09/10/2017

 Nissan Ariel Taveras (630Pts.)

0

Will OEM remote remain active after remote start?

Hi, I am doing a stand alone remote start on a 2012 nissan altima with the evo-all. I just want to make sure that the oem remote will be able to unlock the doors after the car is remote started. Thank you
Connectez-vous pour répondre Voir 1 réponse(s)

13/09/2017

 Nissan Marlon Sarita (130Pts.)

0

Why after I started my car on the OEM remote I cannot unlock the door with the remote?

Please provide me a detailed information why i cannot open the door of my car after I remote started it with oem remote and when I open the door on the driver side using mechanical key the engine shutdown ?
Connectez-vous pour répondre Voir 1 réponse(s)

03/01/2017

 Nissan Vincent McShane (130Pts.)

0

I cannot get Flash Manager to save options with EVO ALL

Have EVO-ALL NIST 1, service #001A06680216 and Flash-Link-4, service #002504 043308 for a 2013 Nissan Maxima PTS. Flash updated module to hardware version 6, firmware version 72.24. When I try to save options for 3X lock in flash manager the device immediately disconnects and message appears: "The current unit does not support this feature". How can I get module to accept changes?
Connectez-vous pour répondre Voir 1 réponse(s)

08/11/2016

 Nissan steve capitao (600Pts.)

0

evo one standalone in 2013 nissan nv200

Hi, 2013 nissan nv200, i would like to use the evo one as a standalone unit for remote start, is this unit capable and if so, how would it remote start, lock key 3times? Thanks in advanced!
Connectez-vous pour répondre Voir 1 réponse(s)

17/04/2016

 Nissan aline cazarez (130Pts.)

0

2012 altima will not start

install all the harness and use a ttab to wire to the brown wire to the pust to start button. Did the aapropiate programing following the instructions, all lights flash accordingly. I try starting the car and it wouldn't do it. The red light turn and yellow biinks and you can hear the module clicking but the car will not start. Any advice so i can get my remote start to work properly.
Connectez-vous pour répondre Voir 2 réponse(s)

17/04/2016

 Nissan aline cazarez (130Pts.)

0

2012 altima will not start

install all the harness and use a ttab to wire to the brown wire to the pust to start button. Did the aapropiate programing following the instructions, all lights flash accordingly. I try starting the car and it wouldn't do it. The red light turn and yellow biinks and you can hear the module clicking but the car will not start. Any advice so i can get my remote start to work properly.
Connectez-vous pour répondre Voir 2 réponse(s)

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer