All sensor Question & Answers

11/08/2024

Toyota dong huynh (630Pts.)

0

Shock sensor

Can I add shock sensor Evo one on 2022 Toyota Corolla with oem alarm ? Thank you.

sensor

Login to reply View 1 answer(s)

06/02/2022

Chevrolet matlock kascak (230Pts.)

0

Shock sensor not firing the evo all alarm.

Evo all serial number 001A07339278 Have dei shock sensor with battery to red gnd to blk and the blue trigger to the purple white on the evo all. Added siren and relay and turned on alarm features and siren and alarm are working just no set off from shock sensor

shock

sensor

evo-all

Login to reply View 1 answer(s)

06/02/2022

Chevrolet matlock kascak (230Pts.)

0

Shock sensor not firing the evo all alarm.

Evo all serial number 001A07339278 Have dei shock sensor with battery to red gnd to blk and the blue trigger to the purple white on the evo all. Added siren and relay and turned on alarm features and siren and alarm are working just no set off from shock sensor

shock

sensor

evo-all

Login to reply View 1 answer(s)

09/02/2021

Chevrolet marcus madden (220Pts.)

0

how to connect shock sensor to evo all with gm7 harness on 2014 malibu with flip key?

I connected wire from to shock sensor to purple/white, but it will not trigger alarm.

shock

sensor

Login to reply View 1 answer(s)

08/11/2020

FAQ robert arberry (200Pts.)

0

CAN I USE A DUAL STAGE PROXIMITY SENSOR AND A SHOCK SENSOR WITH THE EVO-ONE?

2008 Chevrolet Impala LS

shock

motion

sensor

Login to reply View 0 answer(s)

09/06/2020

Buick Mohamed Ali (460Pts.)

0

shock sensor activation

Having Buick Regal without factory alarm with EVO-ALL Standalone installation With GMT6 Harness And RFK-912 External Remotre starter powered by RFA2A Cable i got fortin dual stage shock sensor and wanted to connect it to evo-all the cable came with the sensor has no where to be connected to RFA2A Or GMT6 harness the only was is to connect it to RFA2A black connection directly to shock sensor itself, shock sensor gives red light but not triggering alarm on shocks how to install it correctly to trigger alarm horn, and if possible without cutting and connecting wires??

shock

sensor

Login to reply View 1 answer(s)

24/04/2020

Chevrolet Cam Cross (1070Pts.)

0

Powering my shock sensor off evo all

I am going to be using an evo all as an alarm, since my vehicle has Oem remote start. I purchased a shock sensor and siren, and was wondering if I could power the shock sensor off of the red and black wires going into the evo all from the t-harness? I am not sure what the rated capacity is, and don't want to damage anything.

Login to reply View 1 answer(s)

09/04/2020

FAQ Jeffrey Ingber (750Pts.)

0

Max current rating of +12V pin in shock sensor port on EVO-ONE.

What is the maxiumum current (mA) I can draw from the +12V line in the shock sensor port of an EVO-ONE? Thanks, Jeff

Login to reply View 2 answer(s)

09/04/2020

FAQ Jeffrey Ingber (750Pts.)

0

Max current rating of +12V pin in shock sensor port on EVO-ONE.

What is the maxiumum current (mA) I can draw from the +12V line in the shock sensor port of an EVO-ONE? Thanks, Jeff

Login to reply View 2 answer(s)

11/11/2019

Ford Matt Reynolds (130Pts.)

0

Are you able to add a shock sensor to a evo-all in standalone for a 2015 F-250?

Seeing if a evo-all could also be used as an alarm on a 2015 F-250. The vehicle does not have a oem alarm.

Login to reply View 1 answer(s)

07/11/2019

Jeep Natalie Maldonado (880Pts.)

1

Connection of 4 sensor triggers to Evo One Jeep Wrangler manual transmission?

How many ports are available to conect more than one trigger sensor? The installation sheet doesn't have the different pigtail ports name or function. H, I,? Can the Evo One control all 4 sensors: shock, tilt, glass broken, motion. How can the hood switch can be used to trigger the alarm since the regular jeep does not have security while armed to protect battery or any bluetooth relay accessory in the engine compartment. I just ordered the Evo One and the seller wired everything including the linker so the wiring was prep prior to delivery of the components. I am trying to add all these sensors to the unit. Thanks for helping Natalie

Login to reply View 1 answer(s)

22/09/2019

FAQ Alexander Oliynyk (660Pts.)

0

shock sensor power

Evo-one, currently utilizing dark blue wire A8 with option 32.4 to detect armed system status, but would better use it for another purpose.. what about 12V power at black 3 pin shock sensor connector F? Is it always ON? there's no way to play around and make it energised when it's armed only?

evo-one

shock

sensor

Login to reply View 1 answer(s)

23/09/2019

Nissan Robb Millett (250Pts.)

0

I want to turn on alarm and add shock sensor and siren

I would like to add a shock sensor and siren to my Evo All. What do I need to make this happen? I know I have to go in and turn on the settings and I have the flash link.

Login to reply View 1 answer(s)

19/09/2019

Nissan Robb Millett (250Pts.)

0

add on shcok sensor to EVO ALL?

Can I add a shock sensor and siren to EVO ALL and if so what is recommened?

Login to reply View 1 answer(s)

23/07/2019

Honda ROBERT DEVAUL (130Pts.)

0

no power to the camshaft sensor two wire prong

1988 honda civc

Login to reply View 0 answer(s)

05/06/2019

Remote Starters KOZ (750Pts.)

0

Evo one alarm shock sensor warn away only

Evo one alarm. Shock sensor only triggers warn away. When tested without sensor plugged in short pulse triggers warn away. Long pause does the same. Cannot get full alarm to trigger at all. 002807 242359

Login to reply View 1 answer(s)

25/02/2019

Toyota akm (850Pts.)

0

DUAL STAGE SHOCK SENSOR CONNECTION TO EVO-ONE

Hi, I want to add dual stage shock sensor to my evo-one. Is that plug and play application. Is this complete security system which can be added to evo-one. Please let me know.

Login to reply View 1 answer(s)

10/05/2017

Mini jacques lemieux (510Pts.)

0

Evo-One shock sensor zone #4

Bonjour installation du Evo-start est O.K., tous fonctionne sauf un item q'avant l'installation du Evo-start fonctionnais, j'ai perdu mon shock sensor, j'ai tester la pin médian comme il démontre sur le vidéo You-Tube en la groundant à la masse lorsque cela fessait 2 minutes le module Ove-One étais Armé et toujours rien, ensuite j'ai tester le module shock sensor et il envoi bien le signal sur mon multimètre numérique, donc ma question c'est pourriez-vous me dire ce que l'on fais pour activé la zone #4 (Shock Sensor) sur l'Evo-one, je c'est qu'il n'est pas défectueux il fonctionne très bien, il doit me manqué une petite programmation... merci!

evo-one

shock

sensor

Login to reply View 1 answer(s)

12/03/2017

Toyota Lee R (290Pts.)

0

Evo-All "ground-when-armed" wire for Tilt sensor

Installed Evo-All and configured as Remote Start and Alarm. Added Shock sensor on Purple/White (A3-Dual Stage Trigger) wire and a Glass Sensor on the Purple ( A2-External Trigger).

I am considering a tilt sensor and found DEI 507M.

1-how do I connect it to Evo-All? I suspect I will use the same wire I used for the [A2/Purple = External Trigger (-) ... but wanted to make sure I just tap into the same wire

2- The DEI 507M requires a "ground-when-armed" wire ( https://www.falcon.ro/files/home/01.Securitate_si_confort_auto/03.Module_optionale_securitate/Directed507M/Directed507M_manual_EN.pdf ) wondering what wire would that be on EvoAll?

Having a diagram showing the purpose for each wire on Evo-All , comes handy sometimes ( like now :) ) Can you point me to such diagram?

Thanks!

evao-all

tilt

sensor

Login to reply View 1 answer(s)

20/01/2017

FAQ Matthew Scott (660Pts.)

0

What is the specific name of the plastic 3 pin shock sensor connector on an evo-one

I have been to several electronic stores, auto parts stores, and searched the internet. It would help tremendously if I had the specific name of the type of connector used for the 3 pin shock sensor port on the evo-one. I would prefer to have the plastic connector instead of hard wiring it or using butt connectors on the pins. Its hard enough to find a butt connector btw. I have my sensors and the wiring ready to go all i need is the specific name of the plastic connector. Thanks in advance

Login to reply View 2 answer(s)

23/01/2017

FAQ Matthew Scott (660Pts.)

0

Dual Stage Shock sensor "pre-warn" stage triggering full alarm

Good morning, I have installed an omega AU85TN Dual Stage Shock/Glass break sensor on my evo-one. I combined both the pre-warn wire and the second stage full alarm wire together to the middle pin in the shock sensor port. I am getting a full alarm when either pre-warn is triggered or the full alarm stage is triggered. Not that big of deal considering the sensor is doing its job, but my OCD wont let me settle. Is there anything I can do (add a resistor, etc) to the pre warn wire to have it function appropriately?