Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

03 Yukon.  Unable to remote start when vehicle goes to sleep

Prostart and evo all installed on 03 Yukon.  Remote starter and door locks works fine  except when vehicle sits and goes to sleep.  I have to unlock the door with the factory remote to  in order to remote start the vehicle. Only the factory remote will unlock the door when its in sleep mode.  Any help will  e appreciated

0

2019 GMC 2500HD RF641 no lock or unlock but start function works

2019 GMC Sierra 2500HD diesel WT 3x lock and factory remote works fine. Installed the RF641 kit and remote start works but lock and unlock do not from the RF kit key fobs. EVO-GMT7 installed with T-harness.

0

Do I need two keys for a 2018 GMC Sierra 2500 Diesel

Hi, I"m Looking at adding the fortin Evo all to my truck and i wanted to confirm two things. Firstly when i go to flash the module it says for the T harness THAR-GM5 but fortin gives you instructions for the t harness THAR-GM7 and theres not option to select the GM7 only the 5 could i still use the 7 and flash it as the 5. My second question is do i still need two keys to program or would i be able to just use one

0

2008 GMC Sierra 3500HD remote start works good but now the key will not start the vehicle

I did not hook up any additional wires only the harness is this maybe the issue?

1

Car goes off after 20 seconeds the goes on.

I have Yukon 2005, I install on it EVO All + excalibur 70X when I start it by remote (OEM,Excalibur additional remote or from door lock switch) a car still working for 20 seconds then goes off and automatically started again, This problems stay for 3 times then a car switched off, I make reflash a Fortin but same issue, I replace it with Excalibur 70B also same issue, I checked all wiring every thing in good condtion. But if I start a car by Key it's working fine without any issue. This issue suddnly happend with me started before 3 weeks from now but before it's working fine. Car battery is new I replace it before 5 months. There is any thing need to check it more? please I need help, also I install same devices for many cars I don't face same this issue with any car excepte my car. Please check this issue on YouTube I uploaded a video for this issue: https://www.youtube.com/watch?v=qFL4xSWzhvM

0

2014 GMC Terrain not starting with 3x lock

Installed evo-all stand alone remote start through step 11 correctly and received flashing blue at the end. Updated options including turning on 3x lock and bypass hood safety. Saved the options. Flashed the unit. Tried to start by 3x lock but did not start. The unit flashes blue and still able to use the remote to unlock the vehicle. What have I missed?

0

2009 GMC Sierra shuts off as soon as the key is inserted into the ignition. Evo all with t harass install.

Remote start fine but engine turns off as soon as key is inserted

0

2020 GMC SIERRA 3500 Diesel

Will the THAR GM 7 work using the guide# 91061 on a 2020 diesel? I'd suppose it's the same wiring and programming of a 1500 just turn on diesel mode maybe?

0

Wont start with remote and killing battery when pressing lock button 3x.

0

Dycryptor have reached maximum limit

limite atteinte du dcryptor gmc sierra 2020 model: evo all DATE 08/2020 SN: 001A07 149723

12/03/2020

GMC Josh Ley (500Pts.)

0

Issues With THAR-GM7 in 2016 Sierra 3500 (guide 91291)

THAR-GM7 EVO-ALL and Crimestopper RS4-G5 (datalink; only wires other than Datalink connector from the starter are power and ground because for some reason the starter would not work off the power provided by the DLC) Module programmed fine. Remote start worked several times in a row right after install. Fast forward to next day, delivery of vehicle--remote start worked one time. After that, the ignition would power up but would not attempt to crank. Tried a dozen times, checked plugs. Then the dreaded "service immobilizer system light" came on the dash and I just about S**T a brick. At that point I tried to start with the key--no crank. Wait 30 seconds, thankfully it started up. Reprogrammed module (decryptor process and all) Remote start works fine a dozen or so times, I send the customer on his way. Get a call back within an hour that it's doing all kinds of weird things--locks are acting strange (randomly locking/unlocking) remote start will sometimes work, sometimes not. The weirdest issue is that when he starts with the KEY, drives around, stops, turns the KEY off, the truck will continue running UNTIL the brake is depressed. Could this be a firmware issue? I'm just reviewing the installation manual and it mentions "modules manufactured between certain dates" enable option E5. When I read this during installation I assumed that it was referring to the vehicle manufacture date, not the module. I don't believe the module was manufactured almost a year ago or more, as it came packaged with the THAR-GM7 which just became available.

0

2019 savana powerlock control off evo all

Will the evo all control the factory door locks on a 2019 gmc savana van through its canbus wires or do i need to make connections from the alarm/start module directly to the bcm?

12/03/2020

GMC Josh Ley (500Pts.)

0

Issues With THAR-GM7 in 2016 Sierra 3500 (guide 91291)

THAR-GM7 EVO-ALL and Crimestopper RS4-G5 (datalink; only wires other than Datalink connector from the starter are power and ground because for some reason the starter would not work off the power provided by the DLC) Module programmed fine. Remote start worked several times in a row right after install. Fast forward to next day, delivery of vehicle--remote start worked one time. After that, the ignition would power up but would not attempt to crank. Tried a dozen times, checked plugs. Then the dreaded "service immobilizer system light" came on the dash and I just about S**T a brick. At that point I tried to start with the key--no crank. Wait 30 seconds, thankfully it started up. Reprogrammed module (decryptor process and all) Remote start works fine a dozen or so times, I send the customer on his way. Get a call back within an hour that it's doing all kinds of weird things--locks are acting strange (randomly locking/unlocking) remote start will sometimes work, sometimes not. The weirdest issue is that when he starts with the KEY, drives around, stops, turns the KEY off, the truck will continue running UNTIL the brake is depressed. Could this be a firmware issue? I'm just reviewing the installation manual and it mentions "modules manufactured between certain dates" enable option E5. When I read this during installation I assumed that it was referring to the vehicle manufacture date, not the module. I don't believe the module was manufactured almost a year ago or more, as it came packaged with the THAR-GM7 which just became available.

17/02/2020

GMC Tom Cook (130Pts.)

0

My 2011 GMC Sierra won't start by key with just the T harness THAR-GM4 completely plugged in.

With the T Harness plugged into both connections without the EVO-ALL connected the key will not start the engine. If I disconnect the CAN Bus connecter and reconnect the factory CAN Bus connecter the truck starts by my key. So I guess my question comes down to does the EVO-ALL have to be plugged into the T Harness for me to use my key? The harness is THAR-GM4

01/02/2020

GMC D L3 (160Pts.)

0

Wiring diagram 2003 GMC Sierra 1500 Standard Key, EVO-ALL, STANDALONE

Hello,

I have Evo-all Guide #61111 for GMC Sierra 1500 Standard key, but this is for Regular Installation using separate remote starter and Data-link.

I need the guide for a Standalone installation where the EVO-ALL is the remote starter with no data-link.  Or I need the rest of the pin-out for the 20-pin connector.  The pin-out does not indicate the corresponding pin for the main connections?

What is function is: OUT A5 / IN A6 / IN A7 / IN A9 / A10 / OUT A11 / A17 / A18 / A19 ??

Example, the RS7 OUT - Starter (+).  No 'Ax' corresponding designation for 20-pin connector, is A6 - starter, A7 - Ingition2, etc?

Please advise trying to install EVO-ALL as standalone remote starter in 2003 GMC Sierra 1500 with Standard Key, factory alarm, no heated seats, or heated mirrors, flashed with 70.18 firmware.

0

2008 GMC 2500HD EVO one Decryptor limit reached for vehicle.

I have to reprogram my evo one for my gmc truck again, i keep getting the following message..."THE DeCRYPTOR HAS REACHED MAXIMUM LIMIT FOR THIS Vehicle" service #002B01 006047  can someone please help me?  

0

What settings for 2003 GMC Sierra Diesel - EVO ONE

Have the EVO-ONE and FLASH-LINK 4. Couple of things: 1. Want to set up for remote start with factory key (lock 3x). Do I have to add a RF-KIT to this? If not, do I have to choose one in setup? In Wizard mode, seems to force you to pick a RF-KIT. 2. Truck is a diesel. Found the Pro Mode in settings. Is there anything special regarding Tach or any other settings for diesels that I need to change? 3. The install guide recommends version 70.26. It default wants to install 70.18. When I go to look at other available firmwares, it does not offer 70.26 as an option. (70.28 is the closest). Any reason to not install the latest firmware (70.39 is the highest at the time I write this). Thanks, B

0

Fortin EVO-GMT6 remote start not working after following guide #77231

For starters, my car is a 2018 GMC Terrain with push to start. I followed all of the instructions and wiring exactly, even with the help of crutchfield, and for some reason the car is still not starting up when I press lock 3x. When I press the lock and unlock buttons the evo-all unit led blinks blue, but that's it. Can anyone please help me resolve this issue? Any help will be greatly appreciated. Thank you in advance.

0

2010 GMC Sierra Hybrid won’t remote start

Installed remote start using all instructions. Downloaded the fortin flash link system to update and program and the truck still does not start. It seems like the hybrid system turns on but nothing else. It also sometimes locks al doors and unlocks. Then it is giving an error message to service the security system (used a different word but same idea) and alarm goes off.

0

GMC ACADIA EVO ONE SERVICE THEFT DETERRENT SYSTEM

i install evo one with RF642W evo antina to GMC acadia 2007 SLT full option with power up/down window , i did all wiring as show in installation guide and wire color , car start once with the remote , as soon i put the car key and turn to run possition the car turn off and show a message SERVICE THEFT DETERRENT SYSTEM , then car will not start after that until i disconnect the unit and relearn the main key in car for around 30-45 min , i re done the programming again and the key dcryptor as well and as soon the car run from rf antina or 3x lock when i put the key in car to swith to on it is show same error , any advice what could be error in programming or wiring !?

SN:002B04 005896

0

GMC ACADIA EVO ONE SERVICE THEFT DETERRENT SYSTEM

i install evo one with RF642W evo antina to GMC acadia 2007 SLT full option with power up/down window , i did all wiring as show in installation guide and wire color , car start once with the remote , as soon i put the car key and turn to run possition the car turn off and show a message SERVICE THEFT DETERRENT SYSTEM , then car will not start after that until i disconnect the unit and relearn the main key in car for around 30-45 min , i re done the programming again and the key dcryptor as well and as soon the car run from rf antina or 3x lock when i put the key in car to swith to on it is show same error , any advice what could be error in programming or wiring !?

SN:002B04 005896

0

Gmc terrain 2012 Solid yellow led is not coming in programing mode

I have bought evo gmt 1 with T harness , I updated it to latest firmware 70.35 with plash link, bit whe i try to program solid yellow light doesn’t come. Please send information about setting of bypass

0

2007 GMC sierra classic body style using EVO-ALL?

I am wondering wich year i should select for aquiring a connection/installation guide for a 2007 GMC sierra classic body style. Half way through 2007 was the model/body style change for this vehicle. When i am selecting the year it will give me options for 2003-2006 or 2007-2013. I am assuming i will go with the 2003-2006 option as this vehicle is the classic body style and would consist of the 2003-2006 wiring systems.

0

Remote Start + RF Kit = What am I missing?!

Hello,
I have a 2003 GMC Yukon XL I am trying to install a remote start on. We have the Evo-One, RF kit RF641W, and Flash Link Updater. I cant get the remotes to program. Im not seeing any installation instructions except for the bypass module: Guide 61101. Ive performed installation. It wont start.
Is there an installation guide for the remotes?
What am I missing?

Any help would be appreciated.
Thanks

0

evo-gmt1 will not operate

Hello, I have a 2017 GMC Terrain. I just installed the evo. I get a blue light on interface, but vehicle does not start. I do not have a hood pin or the valet toggle switch connected. I do not want either on my vehicle. I have the flash link and have installed what is reccomended on your website. What is wrong with the unit?

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue