Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

Steering column harness

Hello,

2023-2024 Toyota Camry

Push to start - gas engine

I am trying to install Fortin Evo all with Toy-13 harness. However, I can't find steering column plugs. It could be not equipped with steering column lock. What to do with these plugs? Does it function correctly without connecting these plugs?

0

2022 Toyota Tundra has a cruise control malfunction message on the dash after install.

This vehicle has an EVO one with a toy16 installed.

0

THAR-TOY13 harnese

Please help I have 2022 Toyota Corolla LE push start was installed with THAR-TOY13 harness and I would like to know which colour wire for the horn from T- harness & wire colour output from Evo one also, because I would like to add shock sensor for oem car alarm. Thank you & have a great day.

0

Evo ONE with CARLINK ASCL6 and T harness in a 2022 tundra locks not working via app

Everything programmed and working minus the locks via the CARLINK app. The parking lights flash and mirrors start to fold in during lock but nothing from the lock. Several ofthers are having the same exact issue Any help would be awesome. Thanks -B

0

2023 Camry Push to Start

I have an Evo-All module flashed for a 2020 Camry, but have a 2023 Camry. I need a new wiring Harness. Would I need the Toy-16 harness. Also would the module being flashed for 2020 and not 2023 work? Thank you

0

TPMS Light after EVO-ONE install; lots of Communication Lost codes

Hi, so after my remote install, the TPMS light is on all the time. I understand during remote start this is normal, but this is all the time. I have checked all my tires, they are within normal range. So I ran a code pull on all CANBUS systems, and the result was CURRENT/HISTORY lost communications codes on several modules, one being the TPMS system. It is system code B1247, Main Body ECU Lost Communication... however there are several others too, a dozen or so, to other systems. I thought perhaps they were historical from when I disconnected everything to connect the T harness, but I cleared them and all came back, after I tried clearing just the TPMS code unsuccessfully. I attempted clearing the current/history lost communication code. The light went out for about half a second, and it came back quickly. Checked codes again, it was back. Not sure if that screen shot is visible, all I can see is a placeholder symbol. I will place a share link in my google drive to the code list. VIN removed, but it is a 2018 Toyota Corolla H-Key using THAR-T18 (think the kit i bought was EVO-ONE-T18?, I'll reference and update, but it was the EVO-ONE kit containing the T18 harness) I am presuming this is possibly a programming issue with the EVO-ONE module since the OBD2 port passes thru, but not sure. This is my first experience with Fortin products and do not want to start messing randomly with settings I do not fully understand yet. I've done remote starts before but this is my first Fortin system, switched because of the quality level; I do have a EVO-FLASH unit and have the ability to flash/reprogram everything myself, I have all tools and interfaces needed to make it work, thanks in advance. Details are below: 2018 Toyota Corolla H-key, EVO-ONE, THAR-3 / THAR-18, RF442 installed, TPMS-hijack installed to allow OEM remote start (working OK since installed) https://drive.google.com/file/d/1wVWxhNDwFs4chpdfGXHE7lqC3UKpKHwd/view?usp=sharing

0

2020 Toyota Corolla THAR-TOY13 Install Guide ?

Does anyone know-where or has step by step instructions on where the connect the harness within the car? I find this video online but the quality's a bit crappy... https://www.youtube.com/watch?v=wXubJ6NOrGs&list=WL&index=1&t=25s Anything helps... Pls and Thanks

0

2020 Rav4 PTS. During the programming process the EVO-all is not detecting ignition off.

The blue LED keeps blinking when the ignition is turn off on step 6 of programming.

0

2018 h key remote not working after install

OEM remote worked for lock unlock before making tpms connection. After making the connection it no longer does anything. Not lock unlock or start. I soldered the connection so it's not an electrical connection. I didn't melt anything together while soldering. I confirmed it is the thin blue wire of pin 28 on the connector labeled 4. My next step is to find some kind of pin that fits into the orange 6 pin connector to short pins 4 and 6 together, so that would effectively return it to the factory state with no break in the tpms wire. The connector that plugs into the fortin one. And thoughts while I'm searching for a simple way to do this?

0

T harness for 2015 Toyota Prius

I look through the Toyota t harness and non of them seems to support 2015 Toyota Prius for Evo One

0

2001 Toyota Avalon Cranks but no start EVO ONE with T harness and RM442 remote

2001 Toyota Avalon. Installed per instructions with T harness, flashed using wizard, all showed good. Key sense connected to Red/yellow per wirecolor.com (not red/white as shown in install diagram as there is no red/white). Also verified this red/yellow key sense pulls to ground when key is inserted. Key bypass seemed to program correctly, red LED flashed rapidly after inserting key. Made connections to door locks, trunk, and parking lights, all which work fine. I press the remote start and the car will crank but does not start. Seems like it is not properly bypassing the key.

0

Rf kit not working

Hey guys, So I just installed evo all on a 2018 rav4 push to start with a t harness. 3x lock is working but when I try the rf kit (rfk942) i dont get any response. I paired the remotes correctly…I got the 1x blue light flash confirmation while pairing. Is there something I need to do in the evo all program options? Also, if I change the options, do I need to program the evo all to the vehicle again?

0

Rf kit not working

Hey guys, So I just installed evo all on a 2018 rav4 push to start with a t harness. 3x lock is working but when I try the rf kit (rfk942) i dont get any response. I paired the remotes correctly…I got the 1x blue light flash confirmation while pairing. Is there something I need to do in the evo all program options? Also, if I change the options, do I need to program the evo all to the vehicle again?

05/10/2023