Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

Mazda 3 2018 - Evo One - Rear Defrost

I installed a Evo one in a Mazda 3 2018 push to start automatic with the Thar-One-Maz3 Harness with OEM remote (3x lock). I want to activate the rear defrost on remote start. I have activated the option 39. On wirecolor, it says that the rear defrost is "Positive". Two questions : - What option should I take for 25 ? (there are 6). - How I set the A13 wire to send positive signal ? - How do I wire the A13 ? Do I simply tap on the vehicule wire ? Thanks ! How can I activate the rear defrost ? On wirecolor, it says that the rear defrost is "Positive". I have activated the option 39. What

0

Alarm input detection myCar

Does anyone know how many pulse the alarm input detection on mycar need to see before it notify the app? Also is there anyway for me to use any aux option myxar have with an evo-all installed in 2014 camry pts. Thank you so much

0

Aux 1 and aux 2

Hi all! i install an evo-all with mycar module into 2014 toyota camry pts thar-toy6, everythings are working (yay). Though i see that aux1-orange and aux2-orange/black are unuse, i want to use these aux to control rear defogger and/or heated seat if possible. Please advise, thank you

0

Aux 1 and aux 2

Hi all! i install an evo-all with mycar module into 2014 toyota camry pts thar-toy6, everythings are working (yay). Though i see that aux1-orange and aux2-orange/black are unuse, i want to use these aux to control rear defogger and/or heated seat if possible. Please advise, thank you

0

Aux 1 and aux 2

Hi all! i install an evo-all with mycar module into 2014 toyota camry pts thar-toy6, everythings are working (yay). Though i see that aux1-orange and aux2-orange/black are unuse, i want to use these aux to control rear defogger and/or heated seat if possible. Please advise, thank you

0

Turn on rear defrost when remotely started Subaru Impreza 2013

what wires to use on evo one? what wires to hook to in car? also wiring guide for 2013 Subaru Impreza is missing A1 pin on 20 pin connector(yellow) on module to Ignition. without it car will not start after installing evo one unit

0

Force seat heater and aux input on

Hi, I have and Mazda3 2019 (with push start and presence key) and installed an Evo One + Thar-One-Maz5 + Evo Start2.

I've connected the auxiliary output on a relay to activate the windshield heater and rear window defog (in the mazda3 both are activated together with a ground signal). Its supposed to ground the yellow/black wire when the seat/driving wheel heaters are activated right?

I was not able to test it yet, my car stays in a heated garage and if i understood correctly the evo one uses the internal temperature sensed by the module to activate or not the seat and driving wheel heaters (and the auxiliary signal). So the car doesn't stay parked out for long enough to get so cold inside. 

If i use the defrost button in the app, will it bypass the temperature control and activate the headers/auxiliary signal? If not, is it possible to change config to manually control those? 

Thanks!

 

09/10/2021

Nissan GEO V (130Pts.)

0

EVO ALL PROGRAMMING FOR EVO START 2 AUX1- AUX 2 and Trunk Open for DEFROSTER and Aux Functions

I have Installed EVO ALL AND EVO START 2 using T Harness in Nissan Rogue 2015 Push to start Sl. All the regular functons. But i would like to know EVO ALL PROGRAMMING FOR EVO START 2 AUX1- AUX 2 and Trunk Open for DEFROSTER and Aux Functions. What are the more programming options and wiring to be done for it to function. Or where can i find more details.

0

Rear defroster for Honda HR-V 2021

I have a 2021 Honda HR-V LX AWD. Currently it being controlled by the Evo One with the cellular add-on. Can the rear defroster be turned on through the can bus, or do I have to hook up a wire from the Evo One to the defroster wire?

0

Rear Defroster

Hi I have an 2009 Toyota Corolla S My question is I want the rear defroster to turn on when I remote auto start the car . Can I wire it to an aux and if yes where should I connect and which one I should use. or can i just use Evo FlashLink to setup it . Thank You

0

2011 Jetta defroster connection to EVO-ONE

I plan to purchase an EVO-ONE & TB-VW for a 2011 VW Jetta S standard key and self-install it using the "regular install NO KEY REQUIRED" (Guide # 61511). My goal is to activate electric rear window and side mirror defrosters upon remote start. 
    Are additional wiring diagrams available from Fortin/wirecolor.com showing the rear window and outside mirror defrost circuit connections (these may be separate circuits) for this vehicle? 
Per prior Fortin response to a prior question: the EVO-ONE has an analog AUX output can be set to automatically activate when temperatures are below 5C. 
    Is that AUX output signal though terminal A13(yellow/black)? Is there an additional input connection to make for the vehicle's thermocouple? IF the rear window and outside mirror defrosters are separate circuits, does the EVO-ONE have an AUX2 that will serve the same function?
Regarding the THAR-VW3 harness; would using the THAR-VW3 for this install still allow the AUX/AUX2 functions described above or make them easier to achieve compared to the "regular install NO KEY REQUIRED" method?   Thanks!

0

EVO ONE - 2016 Hyundai Santafe - push to start - no heated seats and rear defrost

I have a 2016 Hyundai Santa Fe Push to Start. I have installed the wiring per the install guide 34341. Bypass options - I have enabled A4 - Heated seats - Automatic low temperature heated seats & rear defrost control. I have saved the options to the module. i use the oem remote Lock / unlock / lock to start The heated seats and rear defroster don't turn on with remote start. Any suggestions? are there other wires i need to install? are there other buttons i need to push? thanks

0

How to turn rear window/mirror defroster ON when remote started

I have a 2019 toyota Camry and I'm trying to get the rear defroster to turn on when remote started and I'm using the Evo-All module to do this. Can this be done over the CAN network or do I need to wire directly from the module? If so can you give me the wire color and connector location so I can hard wire the connection. Also, what wire would I use from the Evo module to do this. Thanks

0

Which wire from evo-one to connect for rear defroster

Hi I have 2017 Subaru Legacy standard key with Evo-one, which wire from the Evo one can I use for my rear defroster?thanks

0

How do I set up rear defrost on the Evo One MyStart2?

Hi, I have a 2020 Kia Sportage Push-To-Start. I am installing the Evo-One on it at this moment and I also have to set up the Rear Defrost + Trunk Open with the MyStart2 (Version 3.2.00). How do I add the aux in the MyStart2 for the Rear Defrost + Trunk Open?

Installation Guide Evo-One: https://cdn02.fortin.ca/download/81611/evo-one_ig_reg_bi_kia-sportage_2017_pts_b_81611.pdf

2nd.. Is there a way to lock the doors right after you close the door (lets say withing 10 secs)?

Thank You

 

**Edit** I found out trunk open is already set up with the MyStart2 so that works while I use it from the phone. Now Rear Defrost.. How do I set it up? I see it in the aux while I set up the rear defrost from phone but it doesnt do anything. Im guessing I need to tap on a wire?

0

2013 Grand Caravan rear defrost wire

I have the EVO-All with EVO Start2 and would like to hook up my rear defrost to Aux 1. my questions are does EVO-ALL have Aux's and if so which wires are they and which wire is the rear defrost wire in the Grand Caravan and where to find it

1

Can 2010 Mazda 6 rear defroster be controlled via Canbus with EVO-ONE?

Wondering if the CANBUS can be used to control the rear defroster over AUX2 on the EVO-ONE for a 2010 Mazda6, and if so if there's a setting in FlashLink that should be enabled. I don't want to pull the unit back out of the car if it isn't even possible. If it's not possible for this car, I'd like to know if the (-) Ignition green wire on the 20 pin connector is available for use--if so, I should be able to wire it to a 12V thermostat cooling relay (something like this https://www.amazon.com/RioRand-Thermostat-Temperature-Controller-Waterproof/dp/B00KCCX0EE) to send ground through the relay based on temperature. Thanks!

0

2017 RAV4 Defrost

2017 RAV4 Evo-All installed. Just wondering if Can-Bus can turn on the defrost on this car? Thanks

0

Rear Defroster - Nissan Altima 2012 2.5

Hi, I just installed EVO-NIST1 as per Installation Guide in my Nissan Altima 2012 (Push to Start - Auto transmission) for using my OEM Key Fob 3x to Remote Start and OEM Key Fob to Remote Shut Off.

Is it possible to switch on rear defroster /defrost when Remote Start ? if yes than where can I get the wiring connection diagram for Altima 2012 etc...

I'm using OEM Key Fob Only.

Thanks

 

0

How do I set EVO one to turn on rear defrost in 2014 mazda 3

I have 2014 mazda 3 evo one installed with t-harness. how do i get the defrost to turn on when remote starting? The heated seat and blower turns on just not rear defrost.

0

Where can the rear defroster wire be connected at?

2010 Subaru Forester. I want to connect the rear defogger/defrost to the remote start. Where is the wire and how do I tap into it? Wirecolor said it was the harness was at the BIU, a blue wire, but wirecolor has been wrong before. I've tried testing this wire with a multimeter, but am getting odd results. If I can tap this wire at the harness, do I program for pulse or latch? Do I need a relay? The wire form the remote start is 200mA(-).

0

2009 Honda Pilot Rear Defrost through A13 - Light green wire at back of switch module?

I used wirecolor.com to identify rear defrost line (light green at control module in dash). I found the wire at the connector behind the switch cluster and confirmed green wire floats high when rear defrsot is OFF and is 18mV when defrost is ON. Assuming this is the correct wire, a pulse low (or constant ground) does not seem to trigger the defrost cycle. Can you provide any additional detail on the wiring? Thanks.

0

Civic 2017 - Heated Seats + Rear defrost

Does an EVO-ONE install on a 2017 Civic allow to activate the heated seats AND the rear defrost below a certain temperature or is it only one or the other? Do I have to hook-up the AUX wire for this to work? As far as I know there is only one AUX output/wire (yellow/black) on the EVO-ONE. If so, how do I tap into the heated seats wire as well as the rear defrost wire at one? Is it safe to do so? Thank you

0

How do I ground the valet switch

Im installing on a 2015 Mazda 3 and I’m seeing that the valet switch can be used in place of the hood pin. I see it just needs to be grounded? Does this mean I just need to splice one wire from the switch to the blue wire on the harness and then the other wire to another ground wire or Somewhere that’s metal? Also, if I install this and decide I’d like to change a setting on it, can I just unplug it from the car and then hook it up and change the setting and plug it back in? Or will I need to reprogram it with my keys and everything all over again? Would there also happen to be a way to control the front and rear defrosters with an added mobile remote start app? Sorry for all the questions!

0

Some issues/questions using Evo-Start

Hi, I have some issues/questions about using the Evo-Start with the Evo-One on a Civic 2017 Si (PTS, manual): 1- When using the Evo-Start, the car starts as expected (the engine starts and the radio is off). Then if I remote stop then remote start again, the vehicle starts, but the radio is not turned on. Then if I open the door to get in the vehicle, the engine stops as expected, but it looks like if the key stayed on the "ON" position (the instrument cluster, the radio and the fan are all turned on). I suppose the behavior should be the same everytime it is remote started, regardless of whether it has been remotely stopped or not? 2- Once the vehicle is remotely started, if the evo-start does not turn the heated seats on, I can turn them on via the Evo-Start (AUX1 set to Heated Seat), but if I set AUX1 to Defrost instead, the rear defrost does not seem to turn on. Can I set up the Evo-One to activate the rear defrost on demand? 3- When I remote start the car, the air setting seems to stay on the last position it was when I left the car, e.g. if I set it to automatic when I was in the car, the Evo-One does not set it on the windshield when remote start). Is there a way to make the Evo-One to set the fan to max speed, on the windshield and to max temperature on winter? I would like to make sure the windhield is defrosted when I need it (when I remote start the vehicle in winter). Thanks!

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer