All working Questions et réponses

27/02/2019

Toyota Sean Baker (130Pts.)

0

2016 h key Tacoma high beams not working after evo one install ? help !!

my high beams are not working now the it acts like it wand ts to but no good

Connectez-vous pour répondre Voir 2 réponse(s)

31/10/2020

Dodge Haidar Jabbar (22390Pts.)

0

2008 Pontiac G5 Factory with Fortin

I have a 2008 Pontiac G5 it originally came with a factory remote start however it stopped working a year ago. I was wondering if I can install a fortin all in one? Thanks

Connectez-vous pour répondre Voir 1 réponse(s)

11/02/2019

Toyota Corey Bollinger (130Pts.)

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

Installed evo-all on my wifes rav4 now her auto headlights are not working.

Connectez-vous pour répondre Voir 3 réponse(s)

17/01/2020

Lexus Radoslaw Patora (740Pts.)

0

2014 LEXUS RX350 EVO ALL , EVO ONE DOES NOT WORK

2014 Lexus rx350 made in canada ,evo one , evo all not working All connection correct ( guide 76891), program modules ok ,blue led blinks ,door lock unlock and luck ( for disarm) , and no ignition-cluster is dark ,engine no crank .I try 2 evo all and one evo one and still this same problem. All Modules 2019 year. whats wrong??

Connectez-vous pour répondre Voir 1 réponse(s)

11/02/2019

Toyota Corey Bollinger (130Pts.)

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

Installed evo-all on my wifes rav4 now her auto headlights are not working.

Connectez-vous pour répondre Voir 3 réponse(s)

28/10/2019

Ford Storm zuidema (130Pts.)

0

2014 Ford edge Remote start works. Key start doesnt

Installed evoall with t harness, programmed and remote start works. However, if I try to use the KEY ONLY to start it won't. Nor will the car shutoff after ive remote started and inserted key. Remote start WILL ONLY shutoff using the lock unlock lock sequence.

Connectez-vous pour répondre Voir 1 réponse(s)

04/05/2019

Honda charles etsinger (130Pts.)

0

2007 Ridgeline will not Remote Start with Encore6 alarm and Evo-All

When i programmed the Evo the instructions says the red light will blink 10 times, it blinked 8. The blue light continued to blink, i then turned the key to off. The truck tries to start, but only cranks. I have wired in the factory alarm arm/disarm (pain in the ass with this truck). The issue is the immobilizer (key icon) blinks on my dashboard when trying to remote start. Ive tried to reprogram 3x, its finished all 3 times (8 red blinks, blue continues every time). It will start if a key is in the ignition, or next to it (duh). Im using the remote start command from the Encore6 (safety start, press * 2x) *Yellow light is on during any command, just checked. Blue light flashes with commands except remote start functioning. When doing remote start the yellow and red lights are on solid, and return on the next try. Thank you for your help.

Connectez-vous pour répondre Voir 1 réponse(s)

13/03/2019

Infiniti herbie yang (160Pts.)

0

Evo-one install on infiniti 2008 G37 6 speed manual but only lock and unlock work. Remote start does not work.

Hi, I’m installing EVO-one with Omega LINKR-TL2 on a 2008 Infiniti G37 6 speed push to start. I follow the installing guide #33251. I flashed the unit up to the latest firmware. Previously I had a DEI XL202 romote start that connected to EVO one. Tested the unit and only lock and unlock working but when attempt to remote start the car. Only see 3 parking light flash. So I though that it could be DEI XL202 is not functioning correctly so replace it with Omega LINKR-TL2 unit but still have the same result. I have been talking to Derek for his assistant and suggested to master reset both the bypass and remote start. Reset the module and reprogram with his suggested selection (BYPASS SIDE: A1-A11 -ON, C1 -ON, REMOTE SIDE: 8.2, 32.2, 33.3 AND 38.2) but have the same result. I’ve been doing a lot of online researching for the passed 2 week but still no luck. (Now only lock and unlock working) Your help will be much appreciated.

Connectez-vous pour répondre Voir 1 réponse(s)

27/02/2019

Toyota Sean Baker (130Pts.)

0

2016 h key Tacoma high beams not working after evo one install ? help !!

my high beams are not working now the it acts like it wand ts to but no good

Connectez-vous pour répondre Voir 2 réponse(s)

11/02/2019

Toyota Corey Bollinger (130Pts.)

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

Installed evo-all on my wifes rav4 now her auto headlights are not working.

Connectez-vous pour répondre Voir 3 réponse(s)

11/12/2018

Toyota Radoslaw Patora (740Pts.)

0

Toyota Corolla 2011 G Key Made In Canada-evo one not working

Instalation Evo One to Corolla 2011 G key ,Ignition conector difrent color wires ,and only one wire to start( guide 23011 two wires for start).Problem is to program bypass like guide 23011-no flashing red/blue and after blue when ignition on. Vin number this car :2T1BU4EE0BC698787 Ignition connector WHITE : PIN 1 - Empty PIN2 - RED PIN3 - GREY PIN4-GREEN PIN5-EMPTY PIN6-BROW PIN7-BLUE PIN8-BLACK BLACK CONNECTOR 7 PIN PIN1-PURPLE PIN2-EMPTY PIN3-BROWN PIN4-BLUE PIN5-EMPTY PIN6-EMPTY PIN7-GREEN

Connectez-vous pour répondre Voir 1 réponse(s)

10/11/2018

Ford eric delgado (160Pts.)

0

2017 ford transit cargo van locks not working after setting for a long period of time.

Hello i have installed a evo-all and viprer 5706 2 way alarm on my 2017 ford transit cargo van using thar1 harness. after setting for a long period of time or overnight the doors will not unlock with the viper fob and its a 2 way fob indicating the doors are unlocked but i have to ude factory fob to unlock them. if i go into astore for a short time the viper fob unlocks doors with no prblem. The evo-all is programed in can bus only becuase the van has no immobillizer. I noticed in the qustions ans answers sectioun that someone was having a similar problem and tech said you may have to add a relay to wake bcm. If this is the case were would relay be wired in and what would trigger it the alarm or module and were would connections be made? Just FYI when i remote sart the van after setting overnight doors unlock with alar fob just fine every time so im assuming this is my problem. any information would be greatly appreciated Tank You Eric

Connectez-vous pour répondre Voir 1 réponse(s)

20/10/2018

Subaru Radoslaw Patora (740Pts.)

0

2014 Subaru Impreza Basic ,EVO ONE NOT WORK

Evo One + Subaru Impreza 2014 Basic Im tired installing evo one for this car ,all connection is ok regular installation but still no illumination blue light when lock/unlock.Program procedure is ok ,decryptor ok and still no work blue led.

Connectez-vous pour répondre Voir 2 réponse(s)

20/10/2018

Subaru Radoslaw Patora (740Pts.)

0

2014 Subaru Impreza Basic ,EVO ONE NOT WORK

Evo One + Subaru Impreza 2014 Basic Im tired installing evo one for this car ,all connection is ok regular installation but still no illumination blue light when lock/unlock.Program procedure is ok ,decryptor ok and still no work blue led.

Connectez-vous pour répondre Voir 2 réponse(s)

25/09/2018

GMC Ray Green2 (130Pts.)

0

evo-gmt1 will not operate

Hello, I have a 2017 GMC Terrain. I just installed the evo. I get a blue light on interface, but vehicle does not start. I do not have a hood pin or the valet toggle switch connected. I do not want either on my vehicle. I have the flash link and have installed what is reccomended on your website. What is wrong with the unit?

Connectez-vous pour répondre Voir 1 réponse(s)

04/02/2018

Subaru Chad Chesley (160Pts.)

0

2017 Forester, standard key, EVO ONE, OEM alarm, remote start wont start

2017 Forester with Standard key Wired with guide #57211 and used T-harness flash link updater updated to current V:4.03 Evo one updated to 79.45 for the 2107 forester evo one promgrammed in car and went good I did not wire up the Power lift gate wire and the Hood pin wire In the bypass mode I have A1-A9 selected ON, (A10, A11,B1 selected OFF), C1,D2 selected ON, (D3-D6 selected OFF) In remote starter mode V:1.24 updated and only ones i changed were 6.2 selected and 38.2 selected then did Dcryptor programming and it went fine put the evo one back in the car and no remote start all standard key features are working i shut the door and can see the evo one and when i lock or unlock there are no lights coming on, on the evo one. isn't the blue light? i thought it was IMO wires so i disconnected the red connector and tried to start the car and it will start but will shut off after a few seconds when i pull the red connector back in and start the car, the red light on the evo one lights up soild Service Number: 002B07 237674 Please Help!!! I also tried the older firmware verison of the remote start mode and still NOTHING Also I was driving home last night and my passenger door switches are not illuminating. What is going on????

Connectez-vous pour répondre Voir 1 réponse(s)

13/01/2018

Ford James Fryman (130Pts.)

0

2009 Expedition Won't Start with Evo One

I have checked the wiring multiple times, the yellow loop is cut, option C1 is enabled, option 38.2 is selected, I've tried to increase the tach time and still I cannot get it to start. I did not wire the door trigger (pins A17/A18) [conflicting information on location of this connection] or the parking lights (E1) at this time. I am conducting two key programming per guide 28331. After the first part (pg 6), I get it to work through step 5, but step 6 will not allow the car to start. The unit does flash the blue light upon each press of the lock button on the OEM remote. I have also tried to continue with steps 7-15 and they all respond as the guide indicates it should. Step 16, I just get a solid red light. I have also ensured that all of the firmware is on the most current versions.

Connectez-vous pour répondre Voir 1 réponse(s)

28/12/2017

GMC Edward Cansler (280Pts.)

0

How can I get the lights back to working in the rear hatch on a 2008 GMC Acadia

What color is the power supply and ground coming into the rear hatch and loaction of a 2008 GMC Acadia and is there a fuse somewhere going to this power supply? I was trying to see if I could get the tag type back up camera to work on this vehicle and there was a red wire coming out of the camera wire not hooked to nothing that got aganist the groung and that is when it went dead along with the lights in the hatch. The other part of the red wire still has power when you put vehicle in reverse. but the red wire hanging loose and the lights in the rear hatch has no power at all, I have checked every fuse in the car and especially the camera fuse and they are all good even tho it seems like I blew a fuse when the loose red wire sparked aganist the ground while I was moving wire around. At this point if I could get the lights back to working correctly in the rear hatch I could do without the camera. Pleas help Eddie Cansler

Connectez-vous pour répondre Voir 1 réponse(s)

03/12/2017

Subaru Steve Floyd2 (1960Pts.)

0

2017 outback, evo one with t harness, wont remote start

2017 outback evo one t harness I programed as install sheet required with bypass options and remote start option install as sheet wiring programmed D cryptor plugged into veh and tryed remote lock 3 times and nothing the blue light flashes each time the remote is hit and parking lights flash but nothing else?

Connectez-vous pour répondre Voir 1 réponse(s)

14/12/2016

Toyota Kelly Bochniak (340Pts.)

0

2014 camry se, with axone , toy2 t-harness, revo1. remote. remote not working.

evo goes thru programming fine, then using valet switch to program 2 remotes, key on , holding valet , i get rapid flashes, push 5 times ,watching red light flash each push, press brake , press button on revo1 and doors lock and unlock? , turn off key, 4 flashes at yellow cut wires, then i press remote and all i get is one blue flash on evo and 2 blue flashes on evo when second remote is pressed. tried key on , pressed remotes and the doors lock and unlock , cant figure i out. bad revo 1? axone? Also the parking lights do not flash when programming the remotes. and no red flash at the loop after the brake pedal is depressed. The crimestopper has to black plugs one goes into the blue connector and i put the other into the data link, if i leave the one out of the data link connector the it doesnt work at all.

Connectez-vous pour répondre Voir 1 réponse(s)

07/10/2016

Dodge Jasen (130Pts.)

0

Remote start not working

Here is all info on what products I have, with links to the pdf's of the manuals showing what I have wired up.. All with a full explanation of what is not working, and what it does while trying to start.... Vehicle: 2008 Dodge Caliber SRT4 Fortin Evo-all with the T-harness ( just purchased the flash link updater ) Crime Stopper SP-502 with the data ports ( Evo is default ). I updated the evo-all via the flash link device to the newest firmware, and the newest update for my evo-all. I did not change any options on the evo-all except for the priority driver door unlock, and then I made sure that the evo-all knew to use the data port for evo series.... ---------------------------------------------------------------------------------------- I followed the instructions that came with the fortin evo-all first... using install directions "A" see here: ( http://fortin.ca/download/28831/evo-all_evochrt5_p20160902.pdf ) I then went to the crimestopper book and followed the install diagram in their book see here : ( http://www.crimestopper.com/cstech/library/security/security_systems/security_keyless_entry/sp-402_sp-502_ins_rev_09-28-2012_green%20kill.pdf ) its near the end shows the module and all the wiring. All options work as expected, except for the siren ( crime stopper side ) and the remote start, which I am not sure is the crime stopper or the fortin.... THe error I am getting when I try to remote start my vehicle is that the ignition is on prior to the remote start... ( this is from the flashes I get from my crime stopper ) I notice when I am in the car, the yellow light on the fortin is on and I believe the red light. ( I can take a video if need be ). I would love to praise the ease of install from the evo-all product and the wirecolor site, but at this point I am highly frustrated. It seems that there might possibly be a conflict between the two boxes, and something is keeping the car from cranking.... Please someone help. I want to put my dash back together.

Connectez-vous pour répondre Voir 3 réponse(s)

07/10/2016

Dodge Jasen (130Pts.)

0

Remote start not working

Here is all info on what products I have, with links to the pdf's of the manuals showing what I have wired up.. All with a full explanation of what is not working, and what it does while trying to start.... Vehicle: 2008 Dodge Caliber SRT4 Fortin Evo-all with the T-harness ( just purchased the flash link updater ) Crime Stopper SP-502 with the data ports ( Evo is default ). I updated the evo-all via the flash link device to the newest firmware, and the newest update for my evo-all. I did not change any options on the evo-all except for the priority driver door unlock, and then I made sure that the evo-all knew to use the data port for evo series.... ---------------------------------------------------------------------------------------- I followed the instructions that came with the fortin evo-all first... using install directions "A" see here: ( http://fortin.ca/download/28831/evo-all_evochrt5_p20160902.pdf ) I then went to the crimestopper book and followed the install diagram in their book see here : ( http://www.crimestopper.com/cstech/library/security/security_systems/security_keyless_entry/sp-402_sp-502_ins_rev_09-28-2012_green%20kill.pdf ) its near the end shows the module and all the wiring. All options work as expected, except for the siren ( crime stopper side ) and the remote start, which I am not sure is the crime stopper or the fortin.... THe error I am getting when I try to remote start my vehicle is that the ignition is on prior to the remote start... ( this is from the flashes I get from my crime stopper ) I notice when I am in the car, the yellow light on the fortin is on and I believe the red light. ( I can take a video if need be ). I would love to praise the ease of install from the evo-all product and the wirecolor site, but at this point I am highly frustrated. It seems that there might possibly be a conflict between the two boxes, and something is keeping the car from cranking.... Please someone help. I want to put my dash back together.

Connectez-vous pour répondre Voir 3 réponse(s)

07/10/2016

Dodge Jasen (130Pts.)

0

Remote start not working

Here is all info on what products I have, with links to the pdf's of the manuals showing what I have wired up.. All with a full explanation of what is not working, and what it does while trying to start.... Vehicle: 2008 Dodge Caliber SRT4 Fortin Evo-all with the T-harness ( just purchased the flash link updater ) Crime Stopper SP-502 with the data ports ( Evo is default ). I updated the evo-all via the flash link device to the newest firmware, and the newest update for my evo-all. I did not change any options on the evo-all except for the priority driver door unlock, and then I made sure that the evo-all knew to use the data port for evo series.... ---------------------------------------------------------------------------------------- I followed the instructions that came with the fortin evo-all first... using install directions "A" see here: ( http://fortin.ca/download/28831/evo-all_evochrt5_p20160902.pdf ) I then went to the crimestopper book and followed the install diagram in their book see here : ( http://www.crimestopper.com/cstech/library/security/security_systems/security_keyless_entry/sp-402_sp-502_ins_rev_09-28-2012_green%20kill.pdf ) its near the end shows the module and all the wiring. All options work as expected, except for the siren ( crime stopper side ) and the remote start, which I am not sure is the crime stopper or the fortin.... THe error I am getting when I try to remote start my vehicle is that the ignition is on prior to the remote start... ( this is from the flashes I get from my crime stopper ) I notice when I am in the car, the yellow light on the fortin is on and I believe the red light. ( I can take a video if need be ). I would love to praise the ease of install from the evo-all product and the wirecolor site, but at this point I am highly frustrated. It seems that there might possibly be a conflict between the two boxes, and something is keeping the car from cranking.... Please someone help. I want to put my dash back together.

Connectez-vous pour répondre Voir 3 réponse(s)

CATÉGORIES DE PRODUITS

CONTRÔLE À DISTANCE & SUIVI

POUR L'INSTALLATEUR

DÉMARRAGE À DISTANCE ET ALARME

Contrôles à distance et applications pour la gestion de flotte

Modules de contrôle à distance et de contournement de clé à puce

Ensembles de type tout-en-un

Ensembles EVO-RS avec harnais en T inclus

Accessoires d'installation

Câble de type harnais en T

Outils d'installation et de programmation

EVO-GEAR

Produits discontinués

Voir tout les produits

Audi

Chevrolet

Ford

GMC

Honda

Hyundai

Kia

Mazda

Nissan

RAM

Subaru

Toyota

Volkswagen

Voir toutes les solutions

Audi

Chevrolet

Ford

GMC

Honda

Hyundai

Kia

Mazda

Nissan

RAM

Subaru

Toyota

Volkswagen

Voir les solutions

EVO-START LTE — Découvrez le plein contrôle mobile

EVO-START LTE — Sécuriez et protégez vos actifs mobiles

EVO-START LTE — Suivi GPS et gestion de flotte

EVO-9-SERIES — Contrôlez à distance avec style

EVO-4-SERIES — La meilleure valeur sur le marché

Harnais en T — Facilitez, accélérez et sécurisez vos branchements

Voir toutes les ressources

Application de programmation FlashLink Mobile

Application de programmation FlashLink Manager

Contrôleurs à distance compatibles

Questions et réponses

Guides de dépannage

Galerie vidéos

Voir tous les outils de soutien

Trouver nos produits et planifier une installation

Commander nos produits en ligne

Trouver un distributeur autorisé

Voir tout

À propos

Pourquoi choisir Fortin

Carrières

Contactez-nous

Questions & Réponses

recent questions tagged: ...

Recherche

Categories

Mots clés

Vous cherchez nos meilleurs participants ?

Vous n'avez pas trouvé ce que vous cherchiez ?

2016 h key Tacoma high beams not working after evo one install ? help !!

2008 Pontiac G5 Factory with Fortin

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

2014 LEXUS RX350 EVO ALL , EVO ONE DOES NOT WORK

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

2014 Ford edge Remote start works. Key start doesnt

2007 Ridgeline will not Remote Start with Encore6 alarm and Evo-All

Evo-one install on infiniti 2008 G37 6 speed manual but only lock and unlock work. Remote start does not work.

2016 h key Tacoma high beams not working after evo one install ? help !!

Voir
les solutions