Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

2018 Tiguan will not start

2018 VW Tiguan, STD-Key, Not digital cluster, AT EVO-ALL firmware 64.06 THAR-VW6 Decrypted and programmed successfully, but when trying to remote start via lock lock lock from oem key, car turns on, but doesn't crank. Tested while in the car and the depress break light (shift lock) was still illuminated. I wired in the Yellow/Red Break Out to Black/Red VESCM (+)Foot Break correctly. Tested command start while in the car and depressing the break, works. Please assist.

0

Factory key fob is stop working while vehicle is started with evo remote.

2017 VW Touareg with (push button) with evo-all 442. Remote start is working, but I can't unlock the vehicle with factory key fob while vehicle running and can't start it with 3x press factory remote. Evo remote cant unlock the vehicle as well. Before it was not an issue. Thank you!

0

Just bought a VW Tiguan 2017 push to start receive only oem key but discover that fortin remote start is installed. that

An electronic gadget is installed on windshield blue and red light blink and written evo on it. Can I link my oem key to 3x lock??

0

2010 VW Tiguan doesn't start.

Hi guys. Dereck could you check this out for me? All the wiring was correct, the programming was perfect, but when the car tries to start, it says, key not recognized and glitch twice when I try to start. I'm not sure if I'm using the correct diode. By the way, the red black wire (starter) is orange black, I'm not sure if this is the correct one either. The transponder wires, one is blue and the other is red, am I opening the blue, or does it not matter? Might you help me? Thank you very much in advance.     Best regards.  

https://drive.google.com/drive/folders/16x-fbU40zovZW_PALHmOfIwePzKDa5r9?usp=sharing

0

2010 VW Tiguan doesn't start.

Hi guys. Dereck could you check this out for me? All the wiring was correct, the programming was perfect, but when the car tries to start, it says, key not recognized and glitch twice when I try to start. I'm not sure if I'm using the correct diode. By the way, the red black wire (starter) is orange black, I'm not sure if this is the correct one either. The transponder wires, one is blue and the other is red, am I opening the blue, or does it not matter? Might you help me? Thank you very much in advance.     Best regards.  

https://drive.google.com/drive/folders/16x-fbU40zovZW_PALHmOfIwePzKDa5r9?usp=sharing

0

Fob doesn’t open car after remote start

I installed an EVO ALL on my Passat 2016 automatic transmission with OEM fob, it remote starts with no problem, i select 15 minutes option, but when I try to unlock the car with my fob it doesn’t respond, I have to wait until car stops then unlock it, also I did try opening the car with the key lock and the car stops when I open the door. Is any especial configuration to make the fob works while the car is running on remote start?

0

2014 VW Tiguan EVO-All EVO-VWT6 TB-VW Starts, and shuts down, shows no key.

2014 Tiguan, Standard Key, using EVO-All, Vwt6, and TB-VW along with THAR-TB-VW. The EVO-All programs fine and has been decrypted. Currently using the Factory FOB to 3x Lock to start. Vehicle starts and then shuts down displaying 'No Key'. No wires have been extended. Everything is connected and triple checked.

0

2011 VW Tiguan - EVO ALL Stand Alone Remote Start w/ OEM Key COMPATIBLE?

I see some conflicting info out here that has me concerned an EVO-ALL will not work properly for a stand alone remote start install on a 2011 VW Tiguan.  

1)  My 2011 Tiguan is technically "push to start" with a transponder chip FOB to allow a start without a true keyed ignition. The install guides reference a STANDARD KEY install, but do show the key FOB wire looping to bypass the transponder.  I just want to be sure upon entering the vehicle after a remote start I would do what... "push the start button and brake" to confirm I had entered the vehicle to simulate turning a manual ignition key to ON? Or is this a dealbreaker?

2)  One of your techs stated that on a 2011 VW Tiguan NO REMOTE UNLOCK is possible with the OEM FOB after a remote start.  Is this true? And if YES, how the heck would I get into the vehicle after a remote start locked the doors and fired up the ignition?  The manual emergency key? Here is the thread...

Also, turn OFF D1 in the bypass options.

 commented Dec 24, 2014 by Robb  

 

Ok thanks a lot , now it starts , one more question how do I get the remote to unlock while the vehicle is on , the remote won't function while the car is on , thanks

 commented Dec 24, 2014 by Ivan Flores  

 

By factory, the remote does not work while the vehicle is started. It's written in the guide and the website that the remote will not function on remote start. Unfortunately, there is no way around this.

 commented Dec 24, 2014 by Robb

 

Thank you for the support!  Great forum and websitre you have here!

0

2011, VW EOS - After programing Evo-All - Won't remote start, no lights

Evo-ALL Guide 61831 - Standalone Install, w/TB-VW. (no key required) Hardware 6.0, Firmware 75.[38] Successful install, programming including decryptor. 3x Lock Button on OEM remote... no red LED and no start. Included options C1, D1, D2, D1.10

0

EVO-ALL After successful installation and programming, 2015 Tiguan will not remote start on 3x lock, OEM remote.

EVO ALL Service# 001A06 746723 with T Harness and TB-VW, standalone install Hardware 6.0, Firmware 75.[38] Successful install, programming including decryptor, checked connection and voltages for CAN wires. 3x Lock Button on OEM remote... no red LED and no start. Help please?

0

2006 Jeta after remote start 3x the remote does not work

Hi everything hooked up and programed great. hit lock 3x and the jetta started tried to unlock the door and nothing. using oem remote do i need to program something different?

0

2014 VW Tiguan w/ EVO ALL remote starts, but the OEM keyfob is not detected when approaching the car.

Installed an EVO All in a 2014 tiguan using guide #65501 and a T Harness. The car remote starts fine, but when the driver approaches the vehicle with the smart key it is not detected. They have to use the physical buttons on the fob to unlock the doors. Is this the way it is supposed to work, or should it receive the signal as it does when not under RS? thanks

0

VW Jetta mk6, manual, standard key requirements

Hello. I have a VW Jetta MK6 2012, manual transmission with standard key. 

What package/ components do I need for remote start with the OEM key? (as plug and play as possible)   What is the price at the moment for the required components?   Does it support any kind of climate controll? (turn defroster/ HVAC on, when remote started)