Questions & Réponses

Hi I am interested in evo start for evo one. But I can't download the app for the German market. Is there another possibility?

Which one would I need for a stock car with no remote start? I only want to use the OEM key fob to control it and don't have any other starter installed. From what I think, the evo all is not stand alone, which requires another starter from viper, compustar? But the evo one is standalone and so this is what I would need to be able to program to my oem key fob?

Specific  Mazda questions, but some background knowledge: Mazda cars have this issue where if a car has been remote started, the engine shuts off if the door is opened. It's a "safety feature " but clearly very poorly thought out. I'm wondering if Fortin is able to bypass it.

1) for a 2016 cx5 automatic, would the engine stop when a door is opened ? In this video below (skip to 15:15 if not already linked) you can see how this gentleman can open the door and engine still runs.
https://m.youtube.com/watch?t=917&v=wbIzTEKrUrc&feature=youtu.be There is still safety-engine turns off if he doesn't push start the car before touching the brakes. This video is for a 2019 cx5, but it uses the same key fob as my 2016 cx5. Would I expect same operation? I may have seen a user post a 2016 cx5 with the same issue. 

2) I'm planning to get a new mazda3, and install Fortin if it works well with cx5 above. Same question as above: would this system allow me to open the door and have the engine still run? 

Hi, So when i try to complete the final step of the programming steps by pressing and holding the program button the blue and red lights temporarily go out and then come back on but car does not start. I have all the wiring correct checked more than 4 times. I have checked the wiring to the module and everything. When i program the keys I did follow a step. when I turned the key to the run postion i waited for the seat belt to chime 3 times and then i'd pull out the key I did this for both keys. I would also like to add that both keys are factory oem. I didnt flash this i bought the modul pre programmed

Thank you for any help you give

Update:

After spending some time reasearching other possibkle soultions I was able to get the keys to program. I went off a guy who I saw on youtube install the same module I did but he wasnt specific of when he started counting prior to putting the first key in so I started counting after the first seat belt chime but it was to long. For those who are reading this in the future and are still struggling with the programming step.Its not an easy step don't let anyone fool you. It took me nearly 1 1-2 hours to get this to program. An easy tip I learned is soon as your turn the key to the run postion and you hear the first chime starting counting 1 Mississippi 2 Mississppi 3 Mississppi try to finish your count before the third seat belt chime and you should be good to go.

Currently I have installed Viper 5704 w/ evo-all as my remote start/security system in my 2006 Ford F-150. I want to upgrade the system to be able to start from my phone. I can not go with Viper smart start simply because I have to be authorized dealer to be able to activate before I can use it. For module, installation and activation they want  too much. I was thinking if I can go with ether ASCL6 or LinkR-LT2 with evo-all. How can this be done? Basically what I need this Evo-all to do when I press:

Remote start ——> wire #1 pulsed ground

Remote stop ——> wire #1 pulsed ground

Door lock      ——> wire #2 pulsed ground

Door unlock ——> wire #3 pulsed ground

Also if possible to hook up (Confirmation wires) GWR wire so it will let me know if car started and another wire that could be connected to siren output for alarm trigger

Pulsed ground will activate my 5704v remote start

Is it possible to configure like that? If yes what firmware, and what wires should I use in order to accomplish that?  Do I need another Evo-all or can I use one that I already have?