Hoping someone can help. Volks Atlas 2021 Standard Key, Evo All Stand Alone instal with RF remote kit.
Ensured CAN High and CAN Low connected correctly, I went straight to the OBD port, used number 6 for CAN High(C3 Gray) and number 14 for CAN Low(C4 Gray/Black), but on step 4, once i turn the ignition to the On/Run position the blue light turns off. I even flipped them and still the blue light turns off.
Ensured diodes are plugged in correct direction, Cut transponder wire position 2, D4 to connector side, D6 to wire side.
I master reset the unit, hold down button, plug 4 pin, release when red, press button, lights alternate, disconnect.
SN 001A07 067090
Help me please!!!