Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

EVO-ALL and CarLink CL6 Wiring

I installed EVO-All using THAR-For4. Then i added Carlink CL6 into it. Remote start stop, battery health, and gps features worked right away with no issues but Carlink App also has 4 Auxilary options, heated seats options and lock/unlock options. I read on Fortin that my THAR-For4 shuold be enough to use lock/unlock feature on CL6 but it does'nt work, So I guess I have to open the kick panel and split wires there. I paid $5 for wirecolor.com subscription token to see if I can find wiring help but its created by a 5 years old so thats ok. My question here is how to I connect heated seats to EVO-All and is there any way to add climate control to one of those auxilaries showing in the app (add it to evo then use auxialry to control it). If I can get wire colors and location of wires I can work with that. Thanks P.S. I have evo flash tool and I checked my lock/unlock options are on in the Evo-All settings.

0

No Power to EvoAll 2008 Ford Escalp with Tharness

Hello, I have an Evo-All with a FordThar1 installed in a 2008 Ford escape for stand alone remote start. The vehicle will start and run with the Key normally, but iim not getting any power to the Evo-All. Ive verified this with a DVOM and use a second EvoAll module. Is my T Harness faulty? or is there something else ive missed?

0

2013 mustang , evo one, FORT1 -Do I have to convert the E1 wiring to 10 Amp and connect it to the parking light??

2013 mustang , evo one, FORT1 -

Do I have to convert the E1 wiring to 10 Amp and connect it to the parking light??

0

Aftermarket push start and Evo One

Is it possible to integrate an aftermarket push start kit with the Evo-ONE? I trust it's brains more than the ones that come with the kits and was wondering if it could be wired into it, or if it would have serious conflict even if it's a separate installation.

0

Do you have to connect wires through the 20 pin connector and the 5 pin can connector?

I just want to have the remote start feature on my 2013 ford fusion standard key. What do I need to do to accomplish this? I have the correct t harness and an evo all.

0

What does the OR mean on guide# 86741 for A2 of 20pin connection?. Does it mean one or the other?

09 Focus Evo One standard install. I have in 4001 and in4004 diodes, are they ok to use?.

31/12/2020

Ford Kutech (760Pts.)

0

THAR-FOR2 wire colors do not match install guides

I have a THAR-FORD2 Rev.1 Lot 50317 T-harness.  The harness has a yellow wire, grey w/black wire and light blue wire that are not terminated to a connector.  All other wires are terminated into connectors.  The Light Blue wire comes from a micro relay that is part of the harness. The Grey w/ Black wire is teed into the dark blue wire that teminates into the micro relay. The yellow wire comes from the bundle in the loom.  In guides # 59241 and 59411 the guides indicate there should be a Yellow, Light Blue and LIGHT BLUE w/ BLACK wire.  This harness does not have the Light Blue w/Black wire, it has the Grey w/Black wire.  Should I use the Grey w/Black wire in place of the Light Blue w/Black?  I want to be sure so that I do not damage the EVO-ALL or the vehicle.  Thank you.

 

1

2014 Expedition Install EVO ONE Not Programming 2 Key Setup

After installing the EVO ONE on a 2014 Ford Expedition, during the programming I put in the first key and turn the ignition on and get a red blink and yellow light and turn the ignition off. I then put in the second key and turn on and get a single red blink and turn the key off. I then press the programming button within the 5 second limit and get a single red flash and then the red stays solid. I have rechecked the wiring and confirmed it to be the same as was shown on wirecolor.com as that is different than what is shown on the install guide on your site. I was never able to find the BCM on the driver side or locate the 13 pin or 26 pin connectors that were supposed to be located on the BCM on the driver's side of the vehicle. Can you please help me on what could be the issue during programming? Thanks, Jason

0

Which wire on the evo-one connects to the clutch wire of a 2012 Ford Fiesta.

I'm looking for which wire, I assume on the 20-pin connector, connects to the clutch for clutch bypass on the ford fiesta. There is no documentation her or on Fortin for this information for the evo-one. Thank you,

0

What yellow wire do i need to cut in the loop?

0

F-150 2019 std key and without keyless entry- Correct Installation guide

When I use the dropdown selection tabs on top to get the correct installation guide there is multiple options with no discription of the 2019 model. I need to know which installation guide to use for a 2019 F-150 std key and without keyless entry, truck. The product that was shipped to me is the EVO-Fort3 package

0

2013 mustang v6 standard key fort1 evo all wiring ?

diagram has me confused on power source. Guide 70291 shows brown white from 20 pin going to a relay and then wiring running to purple white on wiring harness for park lights with a 10amp inline fuse added. im scratching my head confused. ive got my gray and gray/ blk ready for can, I've made my lt blue , lt blue/ blk, yellow connections , got my dark blue from 20 pin ready for override switch to be grounded, so I think getting power to it is all that is left and I'm just in a fog on what to do with brown/white from 20 pin to park lights

0

Can I get the wiring diagram for the Tha for4?

Can I get the wiring diagram for the Thar for4 because I would like to add a push to start to my car?

29/10/2017