hi, i installed a Fortin EVOALL+VIPER 4806V remote starter for my 2017 volkswage tiguan with push to start.
i use DATA-LINK wire to connect the bypass module and remote starter. so there is only a few wires need to be connected.
i flashed evoall with firmware 75.25 and the evoall programmed successfully on the car.
i didn't connect the parking light wire for the remote starter. i'm confused for the parking lights wire connection.
the fortin manual shows there should be a RS3 OUT PARKING LIGHTS(-) wire connect to a relay PIN 86.
But the VIPER quick reference install guide shows there is only: a H/4 WHITE/BROWN LIGHT FLASH ISOLATION WIRE -PIN 87a light flash relay and a H/5 WHITE PIN 30 of LIGHT FLASH RELAY
so should i use a relay to make the connection? but how? or there is a realy inside the remote starter? anyway i didn't connect the wires for the parking lights.
should i connect a hoop pin switch to make it work?
For the VIPER 4806V remote starter:
set light flash polarity to -, set horn input polarity jumper to -,
connected the H1 ,H2 wires(6 PIN connector),
Neutral safety switch plugged in and in the ON position.
door lock plug NOT plug in,
ground pin 13 black /white (-) neutral safety /parking brake input (as the manual mentioned) ---- 24PIN connector,
control center connected,
connected the pin8 * IGNITION1 INPUT/OUTPUT (8 PIN connector on viper)
For the EVOALL :
every wire connected as the manual said.
so here is the problem:
when i press the lock button , the door lock no action. i can hear one click sound coming from the viper brain.seems it wants to trigger the parking light to flash one time.
press the unlock button,door lock no action. two click sound coming from the viper brain.
press the remote start button the car wouldn't start. ignition doesn't go on. and i hear 5 click sound from the viper brain. which means :Brake wire is active .
i used a Digital Multimeter to test every wire from the car connector pin to the VIPER and EVOALL pin. all good!
reset the EVOALL module. nothing changed! took the EVOALL off the car to reflash it. i can enter every menu EXCEPT the EVO-ALL OPTIONS. Always shows unit is not connected.and stuck there.
my computer system is windows10. i tryed diffrent computers,diffrent USB port. nothing changed.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
