Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

Cannot lock/unlock doors from RFK441

Hi, I installed an Evo All with NIST1 to an Infiniti G35 2007 with PTS and an RFK441 kit. The car will remote start with the RFK441 remote, but I cannot get it to unlock or lock the doors. Any ideas what is going on or what I could check? I can see the lights on the Evo and RF Antenna light up when I press the lock and unlock buttons, and the Parker lights also light up as well. S/N of Evo: 001A07391493

0

Driver Door sensor malfunction when EVO-ALL plugged in

I installed the Evo-all successfuly and it worked well for 1 week. Now, the lights on the box do not turn on at all and the car tells me that the driver door is open when it is actually closed. This is problematic because it keeps the interior lights on. If I unplug the "A" connector (the largest of all the connectors), the car will start like it does from the factory and the car no longer tells me that the driver door is open. Of course, the remote starter does not work with the A connector disconnnected. Is my unit faulty?

0

Can i access lock unlock wires at the BCM on a qx56 2011

Wire color website indicates that the lock unlock wire are behind the door panel, I don't know how to get to this wires from under the dash. I can't find it coming in from the door either. So figured it'd be easier to tap into from the bcm. Are the wires there? If so, what connector/pins?

1

evo-all + DSM300 Smartstart

I have a 2009 Infiniti FX35 with evo-all with the T-harnes and added a Directed DSM300 smartstart module. I have two issues; 1) when I remote start the car everything is fine and the doors remain locked. When I remote shutoff the car, the doors unlock. Is that supposed to happen? It happens with both the smartstart and 3X lock method. I'm worried that after the 15 minute timer is up on the start and it shutsdown, the doors will unlock. 2) the smartstart will start the car but I can not unlock and lock the doors, I have plugged the unlock/lock wires into the bcm and when I test the lock/unlock on the smartstart, the blue light flashes once so I'm pretty sure its getting the signal from the smartstart module. But the doors dont lock or unlock, could this be a grounding issue or something?

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer