Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

23 tundra wire cut question

I have 23 tundra. do i realy have to cut the pink and splice the purple wires on 64 pin connector?? Is it so i can use oem remote while remote start is active and if thats the case can i just use the fortin add on remotes so i dont have to cut wires i dont mind having to have 2 key fobs if it means not having to cut factory wires ive had 2 key fobs since my first remote start years ago so it doesnt bother me. Thanks

0

Evo ONE with CARLINK ASCL6 and T harness in a 2022 tundra locks not working via app

Everything programmed and working minus the locks via the CARLINK app. The parking lights flash and mirrors start to fold in during lock but nothing from the lock. Several ofthers are having the same exact issue Any help would be awesome. Thanks -B

0

Why does my factory alarm activate on remote start 2018 Toyota Tundra?

0

Help with addding ASCL6 module using Flashlink

I purchased an Evo One a few months ago to add the ASCL6. Thought it was as simple as just plugging it in. Found out you need to purchase the Flashlink to set this up. Did that. Have no idea how to go from here. When I start the program it goes straight to asking me details of my vehicle:make, model, transmission, OEM alarm, System Setup, OEM remote, etct. Where or how do i add the ASCL6 optioin. I've tried everything and can't see to find the option to get this done.

0

Thar-one-toy2 vs thar-one-toy7 ??

What is the difference between toy5 and toy7 recommended harnesses for 2016 Toyota Tundra with G Key?

0

2018 Toyota Tundra Evo One hood pin connection

Hello, I am installing the Fortin Evo One with THAR-ONE-TOY10 wire harness on my 2018 Toyota Tundra. It is not clear where the Pink/Black wire is supposed to connect to the hood pin in the wiring diagram? Thanks for help,

0

Evo One 2018 tundra: Intermittent start on 3x lock, and alarm goes off occasionally

I just installed an EVO one for my 2018 Tundra with Toy10 T harness setup, preprogrammed. The 3x lock button starts the truck intermittently. Is there a specific cadence to it? Also, the alarm goes off occasionally when it remote starts after 3x lock. Any ideas?

07/12/2018

Toyota GSRL (130Pts.)

0

2007 Toyota Tundra Bypass Firmware Version?

The guide online says 79.[41] and the FlashLink recomends 79.[49]. Which one should I use?

0

EVO-One set for 30 min runtime but shutdown after 15 min

EVO-One set for 30 min runtime only running for 15 min MYcar shows 30 min runtime when starting truck just runs for 15 min shutdown howerver app is still counting down

0

Using Evo-One with MyCar Module on 2018 Toyota Tundra

Trying to get MyCar module to work with an Evo-One that works as expected with OEM key fob. Connect it Evo-one and program. Appears to program correctly, proper light flash after hold then pushing valet button 5 times with key on, hit brake and get confirmation. MyCar app shows where my car is on map, voltage of car and cell signal. It will not start car of do other functions. Fortin Tech says Evo-one should work with thos out of the box. cAN NOT FIND ANYWHERE IN fortan software to program cellular module.

0

Using Evo-One with MyCar Module on 2018 Toyota Tundra

Trying to get MyCar module to work with an Evo-One that works as expected with OEM key fob. Connect it Evo-one and program. Appears to program correctly, proper light flash after hold then pushing valet button 5 times with key on, hit brake and get confirmation. MyCar app shows where my car is on map, voltage of car and cell signal. It will not start car of do other functions. Fortin Tech says Evo-one should work with thos out of the box. cAN NOT FIND ANYWHERE IN fortan software to program cellular module.

0

THAR-ONE-TOY5 Harness for 2018 Tundra

I have a 2018 Tundra with an H-Key could I uses the Thar-one-toy5 harness to only have to cut one wire?

0

2018 Tundra No Parking Light

Installed Evo All with viper 5906V on 2018 Tundra everthing work fine except parking light Auto light on : at day the DRL is on but no light in back, at night headlight is on Auto light off : nothing happen On the Viper brain set to + how do i fix this issue? Thank You Service No: 001A06 815070 Preload date: 12-2018 Hardware version: 6 Firmware version: 79.47 Vehicle: TOYOTA TUNDRA 2018 - H-KEY

17/03/2018

RF-Kits (Pts.)

3

Cannot Learn MyCar Telematics Module - Evo-One

I am trying to learn/teach the Evo-One the MyCar Telematics module. I have followed the directions and preconfigured the Evo with the Fortin 2 option. I cannot get the Evo into programming mode. I turn the Ignition to ON hold the button (next to loop) on the Evo for 5+ seconds as the instructions say, but the led never changes to red and remains amber. Any suggestions? I should also note that my install was done using all T-Harnesses so I know I don't have any wiring issues. I tested the Evo for functionality before moving onto MyCar install as well and everything works great. Here is the instructions: http://www.crimestopper.com/cstech/library/security/security_systems/remote_start/mycar_installation_guide_20171109.pdf

0

2015 Toyota Tundra alarm triggered on start and won't unlock with keyfob during remote start session.

truck starts with factory keyfob lock press 3x. after it is running, it will not unlock with the keyfob. also, if given time for the alarm to activate, triggering a remote start with factory keyfob lock x3 sets off the alarm. i received unit pre-programmed from a seller. thanks in advance for your help!

25/02/2018

Toyota Dmas (280Pts.)

1

2018 Tundra does not lock doors after remote start.

2018 Tundra Evo One installed and programmed, remote starts works with 3x lock button pressings , doors unlocks before it cranks but it does not lock back up after vehicle starts even thou option D5 is set.. firmware 79.45 options C1 D2 D5 setting protection Y Evo One remote start firmware version 1.2.4 options 2.4, 38.2 thanks in advance for the help. Dan

0

2018 Toyota Tundra will not program Can Bus, what are next steps?

I have system fully installed. When going through programming, can bus programming yields a red light. Voltage on Can Bus Low is 2.42vdc Can Bus High is 2.62vdc on Fortin can bus wiring harness. I tried alternate can bus programming (let go of program button on blue light, turned ignition on, get blue flashing lights). I have tried reprogramming 10+ times, immobiliizer programming is successful. Using THarness. Open ticket is 10820 Bypass Firmware 79.45 Remote Start 1.24 C1, D2, 2-4, 38-2

0

2018 toyota tundra

got a 2018 tundra, bypass programmed fine, all wiring matched the guide. bypass does not do immo, car just cranks hardwired to a viper 4x06

0

RF642W engine kill and unlock sequence

how do i program the unlock button to only unlock driver door with one click and all other doors with 2 clicks? How can I kill the engine if I remote started it and want to cancel? 2017 toyota tundra 1794 edition thanks!

0

Blue led won’t stop flashing after I turn key to off position

I have a 2010 Toyota Tundra I have the wiring set up good, I start the programming process, hold the button it till red only light put the key in the ignition red blinks 10 times I turn key to run position (not start) the blue light flashes, then turn the key off and the blue light is still flashing directions say the blue light will turn off but is not any help thank you

0

2012 Tundra - 3x Lock trips panic, keyless does not work after remote started

I have had the Fortin Evo One remote starter installed for nearly three months, and it has worked flawlessly until yesterday. The 3X lock will now almost always (but not every time) cause the factory alarm to go off. It will also remote start the truck in the process, but will not allow me to use keyless to unlock/lock the vehicle. The running lights flicker when I press the unlock key on the fob, but nothing else happens. Two indicator lights, the Traction Control and ABS lights, turn on and remain on even after a successful/uneventful remote start. Any ideas?

1

2012 Tundra will not start, just continuously cranks over

So I purchased a pre flashed EVO One with Toyota 2 harness and RFTX64-2W remotes, for my 2012 Tundra. I hooked up all the listed wires in the install, which I verified multiple times per your diagram. All my connections are soldered and covered using shrink wrap tubes. I have read through all your Q&As and still have had no luck with the remote start. After the Tundra continuously cranks over, the parking lights flash 4 times. Please help.

1

2012 Tundra will not start, just continuously cranks over

So I purchased a pre flashed EVO One with Toyota 2 harness and RFTX64-2W remotes, for my 2012 Tundra. I hooked up all the listed wires in the install, which I verified multiple times per your diagram. All my connections are soldered and covered using shrink wrap tubes. I have read through all your Q&As and still have had no luck with the remote start. After the Tundra continuously cranks over, the parking lights flash 4 times. Please help.

0

2015 Tundra with Evo One SOMETIMES cranks without starting

I installed an EVO-ONE on a 2015 Toyota Tundra. 1 out of 5 times when he engages the remote start, the truck will crank for around 8 seconds without starting. The other times it starts perfect. Tach is set to data only, and is not set to crank for 8 seconds. He said also every once in a while the lights on the dash will shut off at night after a few minutes of driving. I used the t harness and as always, i soldered the rest of the connections.

0

OEM FOB 3X lock, car starts, alarm goes on and can't turn off with FOB

2014 Tundra. EVO ONE with T Harness. Picked up truck at the dealear and worked perfect. Press lock 3 times and engine starts. Press unlock and enter truck. Put key in and turn to drive away. Perfect. I get home and show wife and imediatly the alarm goes off. FOB won't work. Put key in door and alarm stops. 2 seconds later the truck starts on its own and starter stays engaged for several seconds after the start. Put foot on brake and truck stays running. Try putting in gear and engine turns off. Anyone know what could have happened?

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer