Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

23/03/2024

Subaru Jim (850Pts.)

0

2015 Subaru Legacy STD key alarms when opening door after unlock with key fob but not with smart-phone module unlock.

I have a 2015 Subaru Legacy that I have install an EVO-ONE (002B07172969) on with the T-Harness and have an issue with the car alarming when the door is opened after unlocking it with the key fob. If I use the smart-phone module to unlock the car, no alarm sounds when the door is opened. If I disable the alarm feature (change from option 14.2 to 14.1) everything works fine. Any ideas? On another note, the troubleshooting app for android does not exist on the Google Play Store.

0

Locate turn signal wire for 2011 Subaru legacy

Hi, I don't see any information about the turn signal wire for my 2011 Subaru legacy. Can someone provide that information? What is the color of the wire and where is it located?? Thanks,

0

T Harness for an 09 legacy?

The T harness for Subaru on the website says 2013+ with standard key. Are there any that will work with an 09 legacy with standard key?

0

Which wire from evo-one to connect for rear defroster

Hi I have 2017 Subaru Legacy standard key with Evo-one, which wire from the Evo one can I use for my rear defroster?thanks

0

No tach detected??

I have a 2017 Subaru Legacy 2.5l automatic (standard key) with evo-one for years now with no issues till today I installed the Autolink device,when remote starting vehicle, it starts for a few seconds but shuts off and 4 parking light flashes which is no tach detected?please help.. thanks service # 002B02xxxxxx

0

Tele-connect + horn wire??

Hi I have a 2017 Subaru Legacy(standard key) with Evo-One and I’m going to install the Tele-connect device and on the manual step2 to connect yellow wire to positive horn wire but the evo-one is already connected to the negative horn wire, do I still need to connect the yellow wire from the tele-connect to positive horn wire? i tried searching where/what color my cars positive horn wire but couldn’t find it. Also if I connected the horn wire from tele-connect do I need to disconnect the horn wire from EVO-One? thank you

0

2016 Legacy no start with remote starter

I installed the Evo One in my daughters 2016 Subaru Legacy Limited with the regular key. I used the "T" harness and wired it as described on the website. When Lock button is press 3 times, the parking lights flash 3 times. I red in the quick start guide that this means read mode disabled. But could not see where to diagnose this issue. Programming went fine, All the LED lights did as they were supposed to. Decrypting worked OK. There are no LED lights lit on the unit at any time while plugged into vehicle. None when hit lock button, none when key is on, Pressing lock 3 times does nothing, tried unlock, then lock 3 times and nothing. I did notice the security light on the dash glows very slightly inbetween flashes, and also with the engine running. I connected all the wires as per the wiring diagram The IMO wires are connected at the back of the fuse panel in the White/Blue wire. The Yellow loop is cut as this is an automatic vehicle. THANK YOU!

27/02/2018

Subaru Jim (850Pts.)

0

Evo-one and 2015 Legacy does not respond to keyfob if delayed exit from car

I have installed an Evo-one in a US version of a 2015 Subaru Legacy standard key with the T-Harness. The issue at hand is that the OEM keyfob will no longer open or close the locks if you delay your exit. If you exit immediately, the keyfob functions as normal. If you delay long enough that the interior lights dim to off, the keyfob will not lock or unlock the doors. The only way to make them functional is to put the key in the ignition and turn the car on and off and then immediately lock the car.

10/02/2018

Subaru Jim (850Pts.)

0

Evo one not locking after remote start 2015 Subaru Legacy standard key

Issue: After remote start Evo-one does not lock car. Background: Installed Evo-one in a 2015 Subaru Legacy standard key. Only change from guide 57221 is that the Immobilizer wire was located in an alternate location on connector back of the fuse box as found on wirecolor.com for Subaru Legacy (2015-2017) photo 20. After 3x lock presses, unit will unlock and start car but will not lock after car is started. Pressing the lock button on the remote locks the car but Evo-one does not seem to sense it as there is no flash of blue light. This is also true when the unlock button is pressed. Car unlocks but no flash of the blue light on the Evo-one. Prior to remote starting, the Evo-one blue light flashes with every press of the lock or unlock button. Other options I have tried without success: D2 on and 6.2, D2 off and 6.2. Other things that did not work: 37.2 causes engine shut down all the time. 7.2 does nothing. No lock or unlock. I had double checked all the connections and all the taps are solder joints. Turned D2 off and car remote started with 3x lock and doors stayed locked. Can use keyfob to unlock doors. Insert key, turn to on position, step on brake and key take over successful. No apparent alarm. If I use keyfob to unlock door and step on brake, engine cuts off. So notes: 1) Prior to remote start or key start, Evo-one appears to see keyfob presses as evidence of the Evo-one blue light flashing when doors are unlocked/locked with keyfob press. 2) After remote start, Evo-one does not see keyfob presses as evidence of no blue light flashing when doors are locked/unlocked with keyfob press. 3) If car is key started, keyfob presses are not seen/ignored by the car as evidence of no lock/unlock with keyfob press and are not seen by the Evo-one as evidence by lack of blue light flases with keyfob presses. So do we need to wire it differently, get different programming, or am I just out of luck to enable other desirable features like 37.2 and 7.2.

0

What relay to use during Subaru Legacy EVO-ONE installation

I am following Guide # 46701 for a 2012 Subaru Legacy. It says one relay is required for installation, but dosen't give specs as to what kind of relay. Would a relay such as these work? https://www.amazon.com/dp/B017VDI0GY

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer