I have a Key-Override-All bypass unit and it shows to connect the required wires at the igniton barrel area. The installation manual shows that the RX and TX wires are at the 7 pin wire harness (Pins 4 & 5 for Rx and Tx, respectively). However, the 2007 FJ Cruiser I have does not have the 7 pin wire harness, rather, it has a 4 pin wire harness (Blue connector - The wire colors are Green/Yellow, Blue/White, White/Black and another White/Black. ) Is there another place where the RX, TX, and Keysense wires can be wired to? The remote starter starts the vehicle but stops/dies after a few seconds, indicating that the car needs to have a bypass unit installed. Can someone please let me know where/how I can bypass the car's ignition. Thanks. (remote starter is a 2-way LCD Autostart)