User

Hello, I have an EVO-ONE-942 installed in our Mazda CX5 2016, and it's been working for well over a year now.

Recently I have noticed extra beeps after querying the remote starter by double pressing the "+ " button,
I have made a recording, first you hear the button twice, then the locked beep and then 2 chirps afterwards.

Remote sound  (https://gofile.io/d/yq9seo)

If anyone has any information please let me know, thank you!

I don't like seeing DTC codes as you can tell, and I don't think it's normal to see them ...

This is the description of the fault:

CAN communication line malfunction between start stop unit and PCM

Start stop unit internal malfunction

I'm getting my PCM updated in a couple of days at a Mazda dealer,
can a Fortin enginner verify that this is normal and won't affect the procedure?

Will this issue be corrected with an Evo One firmware update, or
is there some technical issue making this not possible to fix?
 

I have installed the EVO-ONE-942 with THAR-ONE-MAZ3 on my 2016 Mazda CX5 Automatic Push Start, and when scanning the vehicle with Thinkcar I get a DTC in EPS module, code U0338:00-08 (Software incompatibility with remote function actuation).

After clearing all code, it comes back again ...

Also, I've noticed the trunk open on the remote opens it half way, meaning it still cannot be actually opened until you unlock the car. Is there a way to disable trunk open as it doesn't work right?

Another weirs "issue" I found, when the car is unlocked with Fortin remote, then locked with "OEM" remote, when you check status with Fortin remote, it will say unlocked even though it's locked. Then when you lock with Fortin remote, it will report the status correctly.