Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Different between Horn and Siren

I use EVO ONE for my Volkswagen Golf 2012 PtS Now i connect the Orange Wire from A6 to relais from Horn. Its running, but Loud and Long. When i set short or long no different. Can i on Flashlink Manager use siren? Is the time shorter? btw. horn are running when 3x unlock for one time. Use when i press the button? (3x unlock, 3xhorn)

0

Powering my shock sensor off evo all

I am going to be using an evo all as an alarm, since my vehicle has Oem remote start. I purchased a shock sensor and siren, and was wondering if I could power the shock sensor off of the red and black wires going into the evo all from the t-harness? I am not sure what the rated capacity is, and don't want to damage anything.

1

Fortin Siren box contain shock sensor + siren or only siren ? Most of the photos showing siren + shock sensor

https://www.acsdistributors.com/remote-starters/fortin/accessories/fortin-siren1-high-tone-siren-128db.html

1

Connection of 4 sensor triggers to Evo One Jeep Wrangler manual transmission?

How many ports are available to conect more than one trigger sensor? The installation sheet doesn't have the different pigtail ports name or function. H, I,? Can the Evo One control all 4 sensors: shock, tilt, glass broken, motion. How can the hood switch can be used to trigger the alarm since the regular jeep does not have security while armed to protect battery or any bluetooth relay accessory in the engine compartment. I just ordered the Evo One and the seller wired everything including the linker so the wiring was prep prior to delivery of the components. I am trying to add all these sensors to the unit. Thanks for helping Natalie

0

add on shcok sensor to EVO ALL?

Can I add a shock sensor and siren to EVO ALL and if so what is recommened?

0

EVO-ALL with an ASCL6 carlink module

The ASCL6 needs a horn/siren wire to tell the mode when the alarm has gone off. Can I use a connection on the EVO-ALL for this? The green wire?

0

chevy silverado 2008 evo-one with t-harness for alarm and remote start

hello , i'm about to install the evo-one with t-harness to a silverado 2009 with rf kit , i look in the installation guide downloaded from fotin website the main harness of the evo-one doesnot use , but i want to install a siren under the hood , can i plug the main harness in and turn on the option of the evo-one to use the siren and factory horn together? will the power wire of the t-harness can handle all that?

0

chevy silverado 2008 evo-one with t-harness for alarm and remote start

hello , i'm about to install the evo-one with t-harness to a silverado 2009 with rf kit , i look in the installation guide downloaded from fotin website the main harness of the evo-one doesnot use , but i want to install a siren under the hood , can i plug the main harness in and turn on the option of the evo-one to use the siren and factory horn together? will the power wire of the t-harness can handle all that?

0

Evo-One E1 siren install

How would I hook up my siren? It states pin E1 can be used as a + output option 1, or should I use the - horn output and choose option 4. Also, if using E1 does it reqiure a relay between it and the siren?

1

Ax-One / Evo-One Alarm features / Siren connection / 2015 tundra

I have an Ax-One kit that did not come with the siren although it was listed as coming with one. I ended getting an aftermarket 12V Siren. How do I connect this to the Ax-One ? The guide didnt specify. The siren has a red and black wire but Im not sure how this connects to the unit or my truck. I already turned on the alarm in both the bypass and remote start sections in flashlink and selected siren output. As of right now the Evo-One is not triggering my factory alarm with the shock sensor, only causing the parking lights to blink when the alarm goes off so Im hoping adding the siren will fix this issue.

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue