Hi,
When i try to put in ready mode, the parking light flash 8 times. Anyone now what this mean?
I tried to cut the loop for testing and the remote start work with the clutch pedal press. (So now i have to find a bypass for the safety switch, wirecolor says negative so i will probably use starter yellow black)
I did the tach learning and at the end i'm getting the parking light flash 3 times. (Is this correct?)
The dark green wire (Door pin) is connectec to the green wire on the driver kick pad.
The brown wire (hand brake) is connected to green orange
The grey (hood) is connected to the brown on the blue connector.
Trunk pin not connected
Any help would be appreciated.
Thanks