Français
My account Register
Français
EVO-START Wirecolor

Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

ESTIMATED TOTAL:

Checkout

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

Clear All
Collapse All
Expand All
Clear All
Collapse All
Expand All
picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question
RÉCENT HOT! MOST VOTES MOST ANSWERS MOST VIEWS

30/09/2024

 FAQ Julius Pajarillo (130Pts.)

0

Evo All reached limit

Evo All Reahed the limit Service # 001A06380592. This one is never install with firware # 74.26 in which car i can use it as bypass? Thanks julius_pajarillo2000@yahoo.com
Login to reply View 1 answer(s)

01/12/2022

 FAQ Vestarslone vue (160Pts.)

0

Won't start after install Fortin Evo All

Recently flashed and installed a Fortin Evo all for my 2006 Dodge ram Standard key programmed to oem key. After everything is said and done it does not start. I click lock 3x red led turns on then yellow, then red turns off yellow is still on then blue blinks then both turns off with red blinking 3 times at the end then turns off, no start. As for as I know I only have to hook up 2 wires which is one purple and yellow wire coming from t-harness side, purple goes to a green/red wire(Mux A18) and yellow goes to yellow (+ignition A1). In need of some assistance as I live in minnesota and a remote start will do me wonders. Thank you in advance !
Login to reply View 1 answer(s)

21/06/2022

 FAQ Yevhenii Kaptanovskyi (180Pts.)

0

EVO-KEY Toyota Matrix 2006

Hello.

Try to use evo-key on toyota matrix 2006.  I used the latest FORTIN manual "Guide # 84651". All wires connected, double checked, reconnected. 

Several times after re-insert 4-pin connector Red and yellow led flashing and I stopped on step 4, red led not flashing 10 times after key inserted. But now after re-insert power - red led lit and no other reaction, yellow not flash.

Login to reply View 2 answer(s)

21/06/2022

 FAQ Yevhenii Kaptanovskyi (180Pts.)

0

EVO-KEY Toyota Matrix 2006

Hello.

Try to use evo-key on toyota matrix 2006.  I used the latest FORTIN manual "Guide # 84651". All wires connected, double checked, reconnected. 

Several times after re-insert 4-pin connector Red and yellow led flashing and I stopped on step 4, red led not flashing 10 times after key inserted. But now after re-insert power - red led lit and no other reaction, yellow not flash.

Login to reply View 2 answer(s)

16/01/2022

 FAQ Chris Scanlon (300Pts.)

0

EVO Option 39.2 - Temperature Controlled

Is the temperature sensed exclusively by the unit internally itself or does it use CAN-bus data if available for the outside temperature?
Login to reply View 1 answer(s)

23/02/2021

 FAQ Alexandre Oliveira-Létourneau (160Pts.)

0

Micra 2015 manual transmission clutch bypass

For the clutch bypass there is no indication in the installation instructions that shows how to do the bypass. Could you help me  and tell me which wire do i use from the evo one to where i need to plug ? Evo one with the thar-nis5

Thanks! 

Login to reply View 1 answer(s)

22/02/2021

 FAQ Seth Near (130Pts.)

0

What kind of connector is the red 6-pin relay harness for the EVO-ALL?

I have misplaced the red 6-pin relay harness that came with the EVO-ALL. I was wondering what kind of physical connector it is? (Ex. JST-XH, 1.0mm pitch, etc.). Thank you!
Login to reply View 1 answer(s)

09/02/2021

 FAQ P Patidar (390Pts.)

0

Does RFK942 support RM442 (RFK442 remotes) with EVO-ONE

Does existing install with RFK942 & EVO-ONE support RM422 (from RFK422 kit) remote as additional remote? Similarly Does existing install with RFK442 with EVO-ONE support RM942 (from RFK942 kit) remote as additional/extra remote ?
Login to reply View 1 answer(s)

26/01/2021

 FAQ P Patidar (390Pts.)

0

EVO-ONE - INSTALL MYCAR IN EXISTING INSTALL WITH RFK422

Is it possible to support both MyCar Mobile remote start as well as Fortin RF kit remote (e.g. RFK422?) In other word OEM Remote, Fortin RF kit remotes e.g. RFK422 and MyCar (all 3 options) with EVOONE? if you what harness is needed given EVOONE has only 1 blue port?
Login to reply View 1 answer(s)

12/01/2021

 FAQ Jeff Eldred (160Pts.)

0

Flash link light limit reached

Somehow i hit the limit on the flash link for my Evo-All, last i knew i could flash it 4 more times for updates before it hit the limit but i guess not SN: 001A07 190557 thanks
Login to reply View 1 answer(s)

09/01/2021

 FAQ P Patidar (390Pts.)

0

EVO ONE 2 blue interface port shown in RFK912 Install guide

RFK912 Install guide shows 2 blue ports (B & H) for EVO ONE. Blue port B (next to white) - (4-PIN) DATA-LINK ANTENNA Blue (slightly bigger) H - next to FLASH-LINK UPDATER PORT - is labeled as (4-PIN) ANTENNA 1. What is the difference between them 2. As i understand, port B (slightly smaller 4 pin) is used to connect RF antenna. 3. What is the use of Bigger blue port (H) 4. If someone wnats to connect both RF kit remote as well as my car module; how do we connect to EVO ONE or any extra wire kits needed ?
Login to reply View 0 answer(s)

09/04/2020

 FAQ Jeffrey Ingber (750Pts.)

0

Max current rating of +12V pin in shock sensor port on EVO-ONE.

What is the maxiumum current (mA) I can draw from the +12V line in the shock sensor port of an EVO-ONE? Thanks, Jeff
Login to reply View 2 answer(s)

09/04/2020

 FAQ Jeffrey Ingber (750Pts.)

0

Max current rating of +12V pin in shock sensor port on EVO-ONE.

What is the maxiumum current (mA) I can draw from the +12V line in the shock sensor port of an EVO-ONE? Thanks, Jeff
Login to reply View 2 answer(s)

16/12/2018

 FAQ HAI TRAN (210Pts.)

2

LINKR-LT2 (VS-4LU) 4G won't work with EVO ONE

I just got a Linkr-LT2. It came with the Linkr-LT1 quick install guide. I followed the steps in the quick install guide but the unit does not work.
The Linkr LT app only shows my car battery voltage and connection signal. The GPS tracking is working fine. The START/STOP/LOCK/UNLOCK
don't work. I searched the internet and found the "mycar installation guide". I followed the steps to learn the Linkr-lt2 to the Evo one. I turned on the "Fortin 2" function on the EVE ONe.  I pressed and held the valet button for 5 seconds but the RED led light on the Evo One did not turn on.

 

Problem SOLVED. .Linkr LT2 is working fine now...

I found the video on youtube 12voltsolution.  The guy pressed the UNLOCK button on car key several times to neutralize the EVO ONE before he did the following steps.

 

STEP 6. LEARN THE MYCAR TELEMATICS DEVICE TO THE EVO-ONE
In order to communicate with the remote starter, the telematic system must be learned to the EVO-ONE.
1 - Cycle the ignition to the ON position.
2 - The YELLOW LED on top of the EVO-ONE should come ON.
3 - Press & Hold the EVO-ONE programming Valet button for 5 seconds.
4 - The RED LED on the side of the EVO-ONE will Flash rapidly.
5 - Release the push button.
6 - Press & Release the push button 5x times. Everytime the push button is pressed the parking lights
& the RED LED on the side of the EVO-ONE will blink.
7 - Then Press & Release the Brake pedal.
8 - At that same moment the RED LED on the side of the EVO-ONE will blink once to confirm that the
Telematic device ID has been learned to the EVO-ONE.
9 - Cycle the vehicle’s ignition to the OFF position to Exit the EVO-ONE programming.

 

 

 

 

Login to reply View 2 answer(s)

10/06/2019

 FAQ arun fire (130Pts.)

0

What is the difference in flashlink updater hardware v2 vs v4

Advantages over flashlink hardware version 2 vs version 4 and can I use flashlink updater v2 to program my 2011 Honda Civic for fortune evo one
Login to reply View 1 answer(s)

10/06/2019

 FAQ Mohammad Odeh (420Pts.)

0

Evo one master reset

How to do a master reset and delete all programming back to factory setting , which options to use and is 23 is as press or led flash because the first one have no flash led , and is there manual for these options and to be partial reset to delet keyfob, bypass, remote starter.
Login to reply View 1 answer(s)

16/12/2018

 FAQ HAI TRAN (210Pts.)

2

LINKR-LT2 (VS-4LU) 4G won't work with EVO ONE

I just got a Linkr-LT2. It came with the Linkr-LT1 quick install guide. I followed the steps in the quick install guide but the unit does not work.
The Linkr LT app only shows my car battery voltage and connection signal. The GPS tracking is working fine. The START/STOP/LOCK/UNLOCK
don't work. I searched the internet and found the "mycar installation guide". I followed the steps to learn the Linkr-lt2 to the Evo one. I turned on the "Fortin 2" function on the EVE ONe.  I pressed and held the valet button for 5 seconds but the RED led light on the Evo One did not turn on.

 

Problem SOLVED. .Linkr LT2 is working fine now...

I found the video on youtube 12voltsolution.  The guy pressed the UNLOCK button on car key several times to neutralize the EVO ONE before he did the following steps.

 

STEP 6. LEARN THE MYCAR TELEMATICS DEVICE TO THE EVO-ONE
In order to communicate with the remote starter, the telematic system must be learned to the EVO-ONE.
1 - Cycle the ignition to the ON position.
2 - The YELLOW LED on top of the EVO-ONE should come ON.
3 - Press & Hold the EVO-ONE programming Valet button for 5 seconds.
4 - The RED LED on the side of the EVO-ONE will Flash rapidly.
5 - Release the push button.
6 - Press & Release the push button 5x times. Everytime the push button is pressed the parking lights
& the RED LED on the side of the EVO-ONE will blink.
7 - Then Press & Release the Brake pedal.
8 - At that same moment the RED LED on the side of the EVO-ONE will blink once to confirm that the
Telematic device ID has been learned to the EVO-ONE.
9 - Cycle the vehicle’s ignition to the OFF position to Exit the EVO-ONE programming.

 

 

 

 

Login to reply View 2 answer(s)

25/12/2018

 FAQ stern0m1 (190Pts.)

0

What does Ready mode disabled mean?

What does Ready mode disabled mean? Evo-one is flashing 3 times when trying to remote start. Thanks
Login to reply View 1 answer(s)

14/08/2018

 FAQ Robert Stevenson2 (400Pts.)

0

Evo-Key: does a proper transponder key need to be in the ignition to drive or would a key that doesn't have a chip work?

We have a Toyota Matrix 2005 and it's transponder key only works intermitantly. I'm considering installing a tansponder bypass like this one (and maybe a remote start while i'm at it) with the hopes that it would fix this by sending a valid code to the immobilizer every time but I'm unclear how the module behaves once a key is placed in the ignition. If, for example, a key is placed in the ignition but it couldn't read a transponder code from it would it cut the engine? Could you still drive the car? Would installing a bypass potientionally solve our issue? After installing an Evo-Key/Evo-One and it is properly set up with a transponder code from a valid key, does a proper transponder key need to be in the ignition to drive the car or would a key that is cut properly but maybe doesn't have the transponder work as well?
Login to reply View 1 answer(s)

14/07/2018

 FAQ Ultra Auto Sound (4920Pts.)

1

flash link manager software

I recently downloaded the new flashlink manager software 4.32. When i plug in an evo-all i notice there is no option to select between datalink/D2D etc. Does the evo-all not need to be set depending on if its used with different brands ?
Login to reply View 1 answer(s)

14/11/2017

 FAQ Pat Lynch (1120Pts.)

0

Evo One Options

Hello Can someone explain the following options on the Evo One. Option 3 Tachless Sensitivity and Option 20 Engine Supervision. Thanks in advance.
Login to reply View 1 answer(s)

01/05/2017

 FAQ Johnny Gauthier (3050Pts.)

0

Comptabilité Evo-start et Autostart

Bonjour, Peut on installer directement un Evo-Start pour actionner un Autostart AS-2381tw-fm? Merci
Login to reply View 1 answer(s)

20/01/2017

 FAQ Matthew Scott (660Pts.)

0

What is the specific name of the plastic 3 pin shock sensor connector on an evo-one

I have been to several electronic stores, auto parts stores, and searched the internet. It would help tremendously if I had the specific name of the type of connector used for the 3 pin shock sensor port on the evo-one. I would prefer to have the plastic connector instead of hard wiring it or using butt connectors on the pins. Its hard enough to find a butt connector btw. I have my sensors and the wiring ready to go all i need is the specific name of the plastic connector. Thanks in advance
Login to reply View 2 answer(s)

20/01/2017

 FAQ Matthew Scott (660Pts.)

0

What is the specific name of the plastic 3 pin shock sensor connector on an evo-one

I have been to several electronic stores, auto parts stores, and searched the internet. It would help tremendously if I had the specific name of the type of connector used for the 3 pin shock sensor port on the evo-one. I would prefer to have the plastic connector instead of hard wiring it or using butt connectors on the pins. Its hard enough to find a butt connector btw. I have my sensors and the wiring ready to go all i need is the specific name of the plastic connector. Thanks in advance
Login to reply View 2 answer(s)

07/01/2017

 FAQ brandon Hahn (160Pts.)

0

2012 nissan murano wont start after evo all install

hello i have a 2012 nissan murano i just installed the evo all with the nist1 harness. for the oem 3x lock. the wiring and programing was shaky at first but i started over and got it right the second time. I can see that the module is responding to the oem remote (blue light flashes when lock button is hit) but the car never starts. one thing that i noticed is that the red light never come on after the 3x lock nor do the brake lights.
Login to reply View 1 answer(s)

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue