Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

2010 Toyota Camry EVO All with Scytek Alarm

Installed an Evo All with a Scytek Astra and everything worked fine but the bypass started unlocking the doors via the datalink cable as if a button was being pushed and it disables the aftermarket remote functions until the bypass is unplugged. Does anyone know the protocol that the bypass should use for a Scytek system or does it need to be hard wired completely as the guide calls for wire to wire since scytek isn't listed?

0

evo one programmed correctly but no crank

2009 corolla (standard key)A/T service#002B07-164975 Install guide #81101 followed the exact connection on the guide and succesfully programed module, but when remote starting with oem 3xremote ignition comes on but does not crank at all. Also coud not get to program the Rfkit model ANT-FMH SM remote model FTX84 please help!!thank you.

0

evo one programmed correctly but no crank

2009 corolla (standard key)A/T service#002B07-164975 Install guide #81101 followed the exact connection on the guide and succesfully programed module, but when remote starting with oem 3xremote ignition comes on but does not crank at all. Also coud not get to program the Rfkit model ANT-FMH SM remote model FTX84 please help!!thank you.

0

Replacing broken evo one unit with another on a 2010 Toyota Tundra.

My evo one was working great in my 2010 Toyota Tundra standard keys for about 6 years. When installing a new my car unit, I accidentally broke one the connector from the evo one unit. So I got another evo one unit and install it. I could not program the evo one with the newer guide. I think my t-harness was a toy1. So I got it to programmed with the blue light, turn the key, and the blue light flashed rapidly. I got the vehicle started 1 and it never start again. The red light by the programming button flashing. I don't think it does that before. Please help

0

toyota corolla 2010 dot key evo one crank but doens't start the engine

toyota corolla 2010 dot key evo one crank but doens't start the engine

0

2011 camry dot key cranks no start

I followed the instructions on guide and the car will crank with the remote starter but only runs while using the key

0

cant get thru step 5 of RF642w remote programing, parking lights didnt flash to confirm programming?

0

VALET BUTTON NO RESPONSE IN RF642W PROGRAMMING TO EVO ONE

IM TRYING THE INITIAL STEP OF PROGRAMMING RF642W TO EVO ONE BUT NO RESPONSE(PARKLIGHT/HORN) FROM HOLDING VALET BUTTON WHEN KEY IS TURNED TO ON POSITION 2010 COROLLA AUTOMATIC W/ DOT KEY W/ T-HARNESS

0

do i need fuse protection from evo one in between connections for rf kit 642w re: 750 mA max output requirement

rf kit 642w wiring guide connectiong EVO ONE module to (-) lock/ (-) unlock wire requires 750mA max current does it need fuse protection in between connection corolla 2010 AT dot key w/ t-harness

0

Is adding rf kit 642w a straight plug and play connection to evo one or i have to solder some additional wire ?

adding fortin 642w rf kit 2010 corolla AT w/ dot key with evo one module

0

2010 Corolla dot key EVO-ONE programmed but no response from factory remote

Installed evo-one in 2010 toyota corolla with dot key. Module programmed ok but does not appear to receive command from factory remote 3X lock command to start. Do I have all the appropriate options turned on/off for the bypass/remote start? Is there something else I need to check?

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue