Hi,
I was just wondering if you can help me troubleshoot connecting my Omegalink OL-RF-42-SST to my EVO-ALL. I am using this guide here to help me program it: https://fortin.ca/download/107781/omega-ol-rf-42-sst-install-guide-107781.pdf
I made sure that the Omegalink kit says "Compatible with EVO-ALL" in the big white sticker as previous versions were only compatbile with the EVO-ONE.
I used FLASHLINK to enable H (Supported RF Kits) and H3 (Crimestopper, Omega OL-RF).
I connected the Omegalink antenna to the blue female connector of my THAR-AUD1 T-Harness.
Used the programming guide, got the EVO-ALL to the stage where red/blue programming light is on, turned on ACC and got all red/blue/yellow lights on and the unit into programming mode.
But when I press lock on the OMEGA RF remotes, nothing happens - no lights flash on the EVO-ALL unit.
I've tried a few times but it's still not going.
I noticed that there is no blue light on the omegalink antenna - it only flashes 6 blue pulses when first plugged into the blue female harness but after that the lights remain off even in programming mode.
I have also tried toggling on/off B2 Extended unit’s inputs/outputs for RF kit (Datalink Remote starter) in the options list with no success.
Do you have any ideas on what I am doing wrong?
Is it possible to get a DCRYPTOR reset on my EVO-ALL as I have also tried resetting the device with no luck and now it says: Dcryptor limit for my EVO-ALL has been reached, the serial is: 001A07470256
Thanks!
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
