2018 4Runner with T harness. Installed with all wires soldered/taped. Double checked all wiring for correct location and proper connection. Everything on the installation side is good.
Problem...
I cannot use the 3x lock function as the Evo-One will not blink (blue led or anything else) with the key off. I can turn the ignition on and it blinks and responds to OEM fob lock/unlock. I can start the vehicle and press the lock button on the fob 3x and then turn the ignition off / remove key and the vehicle will stay running. I can also press the lock button 3x again and the truck will shut off with the fob..But then it will not respond anymore..
So the programming is correct, the wiring is correct, but for some reason on this 2018 4runner (standard key/t harness install), the door lock/unlock doesn't read when the ignition is off.
My 2016 4Runner worked as it should, reading the lock/unlock regardless of ignition switch position, so not sure if its something in the newer vehicle (installation guide shows to be for up to 2018), or if there is something wrong internally with the new evo-one (purchased 2 weeks ago, installed Saturday 12-10-17)
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
