Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

2004 GMC Yukon - Bypass programmed, but I cannot get anything to work after that re valet/remote start programming.

- 2004 GMC Yukon XL 2500 - Wired according to guide 61101 - Verified all wire connections with a test light - Bypass programmed fine - Have Fortin RF642W as well, but have never gotten the LED on the antenna to turn on - Yellow LED on unit comes on with ignition on, but that's it

0

2012 Honda civic valet switch not working.

I installed Evo-One on honda civic 2012 with t-harness. Programming seems to have gone fine install seemed easy enough. Then I go to test the 3XLock to start and nothing happens, after checking settings and making sure harness wasn't damaged I decided to reset the unit and try again. When I turn on the car the valet switch does not enter unit into programming mode. I tried holding it for 10 seconds, I tried pushing it three times and nothing works. What could be wrong that would stop the Valet switch and remote start from working?

0

cant get thru step 5 of RF642w remote programing, parking lights didnt flash to confirm programming?

0

VALET BUTTON NO RESPONSE IN RF642W PROGRAMMING TO EVO ONE

IM TRYING THE INITIAL STEP OF PROGRAMMING RF642W TO EVO ONE BUT NO RESPONSE(PARKLIGHT/HORN) FROM HOLDING VALET BUTTON WHEN KEY IS TURNED TO ON POSITION 2010 COROLLA AUTOMATIC W/ DOT KEY W/ T-HARNESS

0

EVO-ONE won´t enter programming mode with Valet Switch, 2012 Nissan Rogue w/ Intelli Key

Installation for 2012 Nissan Rogue with Intelli Key using T-harness and Guide #34741 Module flashed OK with latest firmware ver. 72.19 With Ignition turned on and holding Valet Button, now horn chirp or parking light flash to indicate module is in programming mode. After about 4 seconds, Red programming LED flashes rapidly but nothing else. After turning off Ignition, Red programming LED will flash 4x before going out. Trying to enter programming mode to programm FTX64 RF transmitter Fobs Is the unit actually in programming mode when Red LED flashes rapidly? Should the horn and parking lights activate per manual?

Ce site Web utilise des cookies pour vous garantir la meilleure expérience utilisateur. En poursuivant votre navigation sur notre site, vous acceptez notre utilisation des cookies. En savoir plus Continuer