Installation for 2012 Nissan Rogue with Intelli Key using T-harness and Guide #34741
Module flashed OK with latest firmware ver. 72.19
With Ignition turned on and holding Valet Button, now horn chirp or parking light flash to indicate module is in programming mode. After about 4 seconds, Red programming LED flashes rapidly but nothing else. After turning off Ignition, Red programming LED will flash 4x before going out.
Trying to enter programming mode to programm FTX64 RF transmitter Fobs
Is the unit actually in programming mode when Red LED flashes rapidly? Should the horn and parking lights activate per manual?
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
