Installing an Evo One with a THAR-ONE-MAX3. Programming goes through smoothly, decrpyts on the Flashlink fine, re-install, and remote start will not function. I have tried resetting the bypass and decrypting multiple times, checked to insure it is not in valet mode, and re-updated the firmware for both bypass and remote start twice before reinstalling to only get the same result. I have also tried lock, lock, lock and lock, unlock, lock, all times and neither works.
I have not hooked up tail lights or pin switch as they are supposed to be controlled by data bus. If this is wrong please let me know.