Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

07/07/2023

Toyota G M (15170Pts.)

0

LC200 EURO

I install fortin evo-all on LC200 (EURO) (standalone--408261). I release the programming button to blue. I connect the rest of the connectors. I turn on the ignition, the blue goes out and after a while the red starts flashing. Wire colors don't match either.

0

Hood pin wire 2017 Toyota RAV4 Hybrid

Where would I need to tap the pink/black wire from the Evo one for the hood pin switch on the interior? I believe it's on the body control module but I'm not sure which connector or wire. I would rather use the factory hood switch if possible rather than installing the aftermarket one and not have to run a wire through the firewall. Thanks

14/12/2022

Toyota G M (15170Pts.)

0

2017 toyota LC200 Repetition of the question.

I installed an Evo-All and a remote start alarm on a Toyota LC 200 (2017). Remote start sets the car to factory alarm and if I open the door with the alarm installed, the factory alarm goes off.                                                          The doors are closed with a purple wire and it will arm, but when I open it with a purple-white wire, the standard(factory) alarm goes off (an alarm is triggered).        evo-all 001A07312787

11/12/2022

Toyota G M (15170Pts.)

0

2017 toyota lc 200

I installed an Evo-All and a remote start alarm on a Toyota LC 200 (2017). Remote start sets the car to factory alarm and if I open the door with the alarm installed, the factory alarm goes off. The doors are closed with a purple wire and it will arm, but when I open it with a purple-white wire, the standard(factory) alarm goes off. evo-all 001A07312787

21/02/2022

Toyota D D (130Pts.)

0

'17 Camry H Key - Remote Unlock not working while engine running

I installed the Evo One Kit with the TOY-4 harness on an H key '17 Camry today and mostly everything seems to be working. I'm using the OEM remote. The only issue is after I triple press the lock key to start the vehicle, I can't use the remote to unlock the doors. I thought everything was programmed properly but apparently not. How should I resolve this issue?

0

No remote start on 2017 Toyota rav4 push to start

I recently installed the evo all on my 2017 rav4 push to start using the evo all and thar toy6 t harness. The module took programming but i have no remote start. The module is attempting to start but no dash lights or remote start. Followed the instructions for t harness install and programming and no luck. Also used connector A which was labeled from factory.

28/10/2021

Toyota G M (15170Pts.)

0

2017 hilux

Hello. Today I installed evo-all on a 2017 Toyota HILUX. The module has been programmed, but the car does not start remotely and the dashboard writes "malfunction of the entry and start system." What should I do? 001Ф07 032826

0

Where to connect the Yellow wire on the Evo start 2. Using EVO one and THAR TOY 8

Using the THAR TOY 8 and EVO ONE, wanted some clarification on where to connect the yellow wire from the EVO Start 2.

0

Accessories or radio does not turn on with remote start- fortin evo one t-harness

My accessories i.e. radio, usb plug in do not turn on with remote start. I sit in with and turn key in ACC, radio and accessories turn on. Once I turn the key in IGN, SRS airbag light stays on. I believe once accessories and radio are able to turn on with remote start, SRS airbag light issue will resolve. I have the T-harness, mycar and long range remote as well. How do i wire this up so accessories, radio and even A/C turn on with remote start?

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

0

2017 Highlander It Locks/Unlocks but DIDNT remotely start from Mobile.

2017 Highlander Push to start EVO All standalone with Tharness & Evo start2 It Locks/Unlocks but DIDNT remotely start from Mobile. I had evoall standalone with Tharness installed on the 2017 Toyota Highlander push to start working perfectly fine Purchased a evo start2 with flash Link Updator 4 Removed the evo all module and update the firmare to latest Save receommended options and save the options Checked the Option C1,D1 H & H2 are on on the module Try to decrypt thru decryptor, didnt succed Installed EVostart 2 Antenna in the car windshield NOTE: the antenna cable shown in installation guide is bit different from shown, have more connector and loose 4 cables red black yellow and green Using Connection1 from evostart2 guide for EVO ALl standalone Installation StepA:Connect 6 pin Antenna conector to Antenna Step B: Connect 4 pin female blue connector to 4 pin male black connector from T harness STep C: Connect Yellow wire from Antenna cable to Yellow wire going on A1 on 20pin white connector of T harness Program EVO All with EVO start2 and got a green light. (programming successful) Installed app on mobile and try to start, When trying to start from MObile, the evostart2 gets a signal, shows blue light in atenna , but do nothing I tried with OEM key fob for lock x3, it does nothing Factory Reset the module, flash the module using flash Link Updator 4 Turn on c1 d1 and d6 h2 Program the module again and works with oem remote Program the evo start2 Able to lock and Unlock, but not able to start from mobile Troubleshooting: I removed the yellow wire sttached to tharness DONT KNOW WHAT HAPPENS WRONG ALso checked grounding dark blue wire from 20 pin T harness to check if get red, NO D1 is enabled please help

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

0

2017 RAV4 AUTO HEADLIGHTS NOT WORKING AFTER INSTALL

17/01/2019