Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

do you need to reprogram after new keys

lost my key and had to get both of my keys reprogrammed at the garage. now after 3 beeps the process initiates but truck doesnt start. 2019 ram 1500 classic turn key diesel

0

Stops unless I hit push to start button twice

2019 Dodge Ram Tradesman 1500, new style, 5.7L, auto, Tip start, . Evo One w/THAR6 harness.Using factory lock/unlock/alarm remote, 3X lock to start then unlock to enter the truck.All soldered and heat shrunk connections. Installed back in June, worked great until last week. Starting one week ago, would shut off when I hit the brake even tho I pushed the start button before touching the brake. By accident I found out if I pushed the start button twice before hitting the brake, it would keep running as it had been doing the previous 6 months, what could have changed?...........Mike **EDIT* Now a few weeks later, it won't keep running even when I hit it twice, stops immediately when I hit the brake....any ideas?........Mike

0

2014 RAM 3500 GAS PUSH TO START . STARTS THEN GOES OFF AFTER FEW SECONDS

Everything works great taillights go on it starts .runs a few seconds shuts off. Or if you unlock door during few seconds of running it shuts off. Does not try to restart. S/N 001A07 177871 for module.

0

2014 ram 3500 push gas push to start pressed 3x turns on no crank

0

3x times pressed , but no cranking everything else turns on. Lock and unlock no remote start

0

no crank after 3 lock presses (blue led each press), red blinks 5x

System quit working after dealer flashed ECM. Updated flash-link and relearned key, but no crank.

0

Stopped working couples months ago, installed last fall

0

how to reprogram evo-all

Purchased a 2017 dodge ram 1500 automatic with tip key start. Wasnt aware I had remote start until I accidentally started it with tip key. Havent been able to figure out how it happened. Tried looking only but cant figure it out. Tried lock 3x, blue lights flash but nothing. Any help would be great.

0

Evo all flashes red 3x. No tach. Ignition turns on but no crank.

Try to remote start with Evo all installed in 2017 ram 1500. Installed and programed as directions said. Used t-harness

0

Does this work for 2019 ram promaster 2500 3x lock to start

0

2019 Ram 1500 Unable to pass step 6 blue led will not stop flashing when Start/Stop is pressed to turn off ignition

2019 Ram 1500 push to start Unable to get past step 6 blue led will not stop flashing when Start/Stop button is pressed to turn off ignition.

VIN: 1C6RREFT6KN568083


Hardware version is 6.0

Firmware version is 63.[01]

flash limit 2/8

Have tested contunity on all leads for completeness, wires are in the correct place and not incorectly tied.

Flash Link

Hardware version 4.0

Firmware version 4.[05]

0

Starts but wont wait for the grid heater to come ON

FIXED AND WORKING almost, now with a diesel mode D1.3 selected and flashed and saved checked 3 times the truck will start but didnt wait for the grid heater to come on started right away!!!! LOOKS like I have to downgrade firmware to 0.36 only need to know if this can be done without a master reset?

0

Unable to get past step 7 but step 7 works BLUE/RED LED on

29/12/2018