FAQ usager

Votre panier

22/01/2017

Ford Mike Payne (490Pts.)

2016 Ford Focus regular key will not program - tried 2 keys and decrypter

Have a 2016 Ford Focus regular SA key. Got it all hooked up and it will not program the evo-all as a 3rd key. Ive done the 2 key programming at least 10 times. Reset the unit, resaved the options. Tried decrypter 3x with one key. It will not program... Is it possible that the RX / TX wires are incorrect in the guide for this car? I've done a directed DBALL2 on same year car before, no problems programming it, but the install is pain in the ass. Out of 30 remote starts Ive done in past couple months I've never had this problem. I've double checked the connection at the immobilzer. LT BLUE/BLACK and LT BLUE. Everything is good. The keysense wire checks out perfectly. When I do 2 key programming at the step where I press the button on the evo-all. RED and BLUE blink few times, then red goes solid. CAN-BUS then shows good with the flashing blue light. Try remote start and it says of course no key detected. What the hell am I missing?

focus-rs

2016

3x-remote-start

evo-all

Connectez-vous pour répondre Voir 2 réponse(s)

14/01/2017

Ford Bernie Surber (190Pts.)

Evo ALL with Ford THarness 2012 Ford Fusion

I have hooked up all connections except for driver door pin because I can't seem to find the correct wire. When I hold the program button and plug in the black 4 pin connector to start programming, nothing happens. No lights come on or anything. When I plug it back in to the Flashlink it comes on and shows the info. Am I missing something? I have my only vehicle dissasembled and really need to get this done. PLEASE HELP Update: I checked the red and black wires on the black 4 pin plug and there is 12.5 volts at the connection. Is this a bad unit? Update part 2: I flashed with an older version of firmware and then reflashed back to current/recommended firmware and it finally cooperated! Up and running. I do have one final question though, I did not hook up the left door pin wires because I couldn't find the correct one to use. What functions will I not have because of this? I have noticed that the car will only turn off if I press the brake. Any ideas?? Sory for the long post, just trying to do it right. Thanks!

Connectez-vous pour répondre Voir 1 réponse(s)

13/01/2017

Ford Bernie Surber (190Pts.)

Options on 2012 Ford Fusion SEL

Hi I am currently flashing my EVO-ALL for my 2012 Ford Fusion SEL (for stand alone remote start) and it says to disable A5 to prevent ignition from turning on when doors are unlocked. Should I also disable A6? My car will roll down the front windows and open the moon roof when you press and hold the unlock button on the factory remote. Will disabling A5 and/or A6 also disable that capability? Just trying to keep from having to uninstall and reprogram the unit if I set it incorrectly. Thanks for any help or advice you can give!