Hello,
I'm experiencing difficulties programming an RFK-411 remote with my EVO-One-KHY2 system installed in a 2016 Kia Optima (US model).
Here's what I've done so far:
Installation: I followed GUIDE #91351 to install the T-harness and EVO-One unit.
Firmware: The EVO-One has the latest firmware for my vehicle (updated via FlashLink).
Programming: Since my car is the US version without the (~)EMS COM cable, I used PROGRAM: 2 to program the EVO-One.
Remote Pairing: I followed GUIDE #68771 to connect the RFK-411 remote, but have been unsuccessful using both the ignition switch and valet switch methods.
The Problem:
The instructions state that the blue light on the RF antenna should flash with each brake press, but the blue light does not respond. This prevents me from completing Step 4 of the programming process.
Troubleshooting:
I've confirmed the red light next to the yellow wire on the EVO-One is off, indicating it's not in locked/armed mode.
It seems the EVO-One is not registering the brake presses, which is preventing the RFK-411 remote from being programmed.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
