Votre panier

Votre panier est vide.

Votre panier est vide.

Continuer le magasinage

RECHERCHE RAPIDE DE VÉHICULE

RECHERCHE VÉHICULE

Questions & Réponses

Consultez les questions les plus fréquemment posées et trouvez des réponses pratiques et pertinentes.

recent questions tagged: ...

picto contact

Vous cherchez nos meilleurs participants ?

Voir les utilisateurs
picto contact

Vous n'avez pas trouvé ce que vous cherchiez ?

Posez-nous une question

0

Evo all works fine, added Evo start lte with the rfa2a cable.

The Evo all has been installed for almost a year and works fine, even after the failed Evo start lte. I plugged the blue connectors from the rfa2a and the start wire harness. Unplugged the 4 wire data plug from the Evo all, taped off it off for protection, and plugged the 4 wire data plug from the rfa2a harness. The black and red wires are not connected and taped off. When I go to program the start, by disconnecting the data port and holding the program button nothing happens. I used the harness for my car also when installing the Evo all. I also flashed the Evo all . Did I miss a step or something?

0

Smart lte installation

Hello, I will install the evo-all-lte with the thar-aud2 on an A4 2018 of a customer who is close to me. I have a few questions because this is the first time I use your brand. The steps are not very clear in your guide, but with my experience, I managed to understand most of it, but I have questions. 1. For the configuration, is it of the smart lte, I have to program the evo-all first and then connect the smart lte and program it? 2. Your guide asks for an RFA2A “sold separately” to connect the smart lte to the evo-all, but I do not need an rf kit since I use the application and the original key. On the other hand, instead of the RFA2A, is there a connection kit provided in the box?

0

What’s needed? 2017 Audi S3 PP DSG Virtual cockpit

As title states what do I need to order to install remote start capabilities. Which system EvoRS, Evo One, T-harness AUD1 or 2, bypass modules, etc. Thanks in advance!

0

Probleme wrap key semble pas fonctionner audi q3 2021

Wrap de key audi q3 2021. Tout fonctionne quand la Clef est dans ignition. Et demarre une seule fois sans la clef. Par la suite sa ne fonctionne plus jusqua ce qu on mettre clef dans ignition.

0

Audi Q7 2018 , AUX Functions

Hi, I have installed a EVO-ALL on my Q7 (4M Platform) (2018). The remote start works great to start the vehicle and I am a ASCL7 that also works. The one issue is that only AUX1 works. The AUX1 turns on heated seats for driver and passenger side. The other AUX don't seem to to anything. I would like to have defrost and rear window defrost. Any advice would help. Thanks

0

Remote start doesn’t pair with the car Audi SQ7

Hello, I purchased an remote starter kit from Romania - Autoextra partner, after 3 days of working on it I had no clue how to make it work, maybe it will be easier to talk directly to you as support and not make a 3 way conversation. Update how I’m now : everything is wired corectly (measured with voltmeter), made the connection to can high and can low in the left side of driver side next to the fuse box (2,6V can high; 2,4V can low) all wired up exactly how instructions are (green, orange/brown with the grey and grey/black from the module connector) and no success, ignition on and the blue led from module goes off and stays off till I turn the ignition off again, then solid blue led shows again. Software version is 61.28 (recommended from the windows program), I refuse to think that it can’t be a solution to make it work together. Maybe someone from tehnical support or software can discuss with me to find a solution, it will be faster via whatsapp if available or by email (I think that there is only 5-6 hours difference between us). Kind regards, Andrei Neacsu

0

Step 11 key programing

2016 audi a3 push to start evo all serial number: 001A07 016953 I flashed the correct software on to unit with the flashlink. I get to step 11 of key bypass-program with r-link, and it says to wait up to 5 mins with solid red light. Then it's supposed to flash yellow, and the flah yellow and red, but the red light just stays lit and never goes past that point. I've tried reseting evo reprogramming to a different firmware, then back to the recommended firmware, but I can never get past that point and have waited up to 15mins. What should I do at this point?

14/11/2024

Audi optyk07 (150Pts.)

0

2014 Audi Q5 Evo All not flashing yellow in step 8 of Key bypass programming

Im not able to proceed from step 7 in guide 77151. When it should begin to flash yellow and red alternating it just flashes red.

0

2016 Audi Q5 no start after install?

Installed a Evo all in my 2016 audi q5 programed the key to it have the latest firmware and no start. the module flashes blue when you lock or unlock. i have the can bus low and high connected to the correct wires. also have the brake switch wire connected to the red and black on the brake switch. click the loc 3 times and nothing happens except the blue light flashing.

0

Linkr LT1 not pairing with EVO All

My Linkr LT1 module does not pair with the evo-all. I am able to get into the programming mode and the lights on my Linkr LT1 are solid, but I never get a blink or acknowledgement that the Linker LT1 was programmed to the evo. I've also tried this process after disconnecting them for a long while with no luck as well. Please refer to the video which shows my failed attempt. My veichle is a 2021 Audi Q5. https://youtu.be/4yhramq7ll0

19/02/2024

Audi Mursini (180Pts.)

0

2015 audi a3, setup and programming complete- no start and no lights on EVO-vwt6

After successfully programming the unit with flash updater and r-link, and a successful d-cryptor session, I reinstalled the unit, and hit the lock button 3 times, and i got nothing. I noted that there are no lights on the unit after all connections are made, with the 4 pin black connector first, and all other connections followed.

29/01/2024

Audi JW (160Pts.)

0

Reason why turned off after remote start

After installing the Lock x3 remote starter and I checked work well. also I flashed the engine to turn off after 15 minutes. But there are situations where the engine turns off when I open the driver's door after starting the remote start. Even though it hasn't been 15 minutes.

It's happens sometimes. What's the problem?

0

Does LTE module control turning heater/AC on/off, heated seats on/off, temperature control? 2010 Audi A4 Key-Port

I just installed the AUDT harness and Evo All module for remote start into my 2010 Audi A4 with key-port. I want to add LTE. Do I just purchase the Fortin Evo start module and program and connect it to my existing EVO All with T-harness? In addition to App control of remote start, GPS, will I be able to turn the heat and AC on and off, control the temperature, and also turn the heated seats on and off? I just want to know the additional features / controls I can have in the app. Thank you.