I've installed an EVO-One in a 2013 Kia Soul (has a normal Key to start vehicle). The install was very simple, I did not that there is an error in the guide regarding the can bus. In this car, pin 6 (can high) is a blue wire, pin 14 (can low) is a red wire. Initially I had only followed the color code and the unit would not learn the can bus at all. I reversed the wires when I noticed the wires where reversed and the unit was able to learn the red (brake signal). It is not able to learn the door unlock / lock from the can bus, and during the programming sequence, I never had the flashing blue sequence to learn the door locks.
I'm unsing a Fortin RF KIT 2W (RF642W). I'm able to remote start the car, but once started, the OEM remote is unable to unlock the doors ( I need to use the key in the door cylindre). The fortin RF kit is also unable to unlock / Lock the doors. I also can not stop the vehicle remotely, only by letting the time expire or pressing the break.
Appreciate any help.
My account
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Find Our Products 
Order Our Products Online
Find an 
