Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

0

Signs of a decryption issue (Bypass) on a VW Jetta 2015

I have installed a EVO ALL on a Jetta 2015 TDI (Push Start - Automatic). I have the EVO ALL, THAR-VW1 and TB-VW installed as per instructions (I decided to skip the trunk release wiring as I didn't find the feature useful for me case). The EVO All is programmed with Diesel Option enabled and it went through the Decryptor without any issues. But when I press the 3 lock sequence. It doesn't start or crank. I see the red light turns on, and then the yellow light turn on... and it repeats this procedure twice (as per the options programmed). The dash of the car doesnt come on (as expected) during the sequence. I will check the brake lights when I have time but I was wondering if there is possibly something wrong with the bypass. Thanks

0

2018 Tiguan will not start

2018 VW Tiguan, STD-Key, Not digital cluster, AT EVO-ALL firmware 64.06 THAR-VW6 Decrypted and programmed successfully, but when trying to remote start via lock lock lock from oem key, car turns on, but doesn't crank. Tested while in the car and the depress break light (shift lock) was still illuminated. I wired in the Yellow/Red Break Out to Black/Red VESCM (+)Foot Break correctly. Tested command start while in the car and depressing the break, works. Please assist.

0

2015 VW GTI Manual, remote start worked once but now just cranks

Just finished installing an Evo-one LTE in my 2015 VW GTI, manual with push to start (mfg. in 2015) using the TB-VW and Thar-vw1 I had some issues with the first iteration of programming but eventually hard reset the Evo module, reflashed it, re programmed with R-link. Installed back in the car and the remote start worked! Buttoned it all up, got the car in ready mode just to test it and it just cranks, but won’t start. my connections and programming were all fine if it started the first time so what would cause this?

0

2012 VW Jetta would not start from any of the remotes and OEM remote after successful programming

I just installed the EVO-ALL with the VWT3 harness, programming went good but the vehicle doesn't start from any of the remotes, the module lights up ( red then yellow and both stay on ) and never get ignition or accessory turned on. The wiring is connected properly, I double-checked everything and tried different coding but still no result and it does not recognize the OEM remote 3 lock clicks or Lock-Unlock-Lock. I am out of ideas, only thing that comes to my mind is that my ignition switch has a different pinout, also after loading the recommended coding it started to give me a 4 RED LED blinks. I am out of ideas, any help would be greatly appreciated. SN: 001A07 367259

0

Once evo-all is programed (successfully), nothing else happens. No lights or attempts to start. What would cause this?

Key version w/o tb-vw or r-link, thar-vw6, evo-all 001a07 239027

0

Remote start only works after you open and close the door

The evo all wouldn't program to the car with the newest firmware, so you guys had me try firmware 4 20. It let me program it after that, but it only works after the door opens and closes. If the car sits it will only lock on the first of the 3 locks then no buttons on the fob work for a minute or so. When I unhook the evo all the fob works fine. 2011 jetta with standard key sn:001A07367332

0

Remote stopped working FTX64-2W

Remote stopped working for no reason. one day it was fine, the next day i get a red light (one blink) after i press the start button. whats the problem and solution ? I have a Jetta 2021 remote was installed at the dealer when i bought the car. Model FTX64-2W FCC ID 2ACKU-R2W01FM IC: 12084A-R2W01FM

0

Remote start worked for couple years now nothing

I have the evo all with the fortin app on my jetta 2011 it worked as should all last winter. Came to use it again eaely december and it wouldnt work. It showed my hood was open on the app, So i looked up on the forum and people mentioned mabye removing the a11 function. i bought the v4 fortin apdater to delete the a11 hood function and removed it today to find out the app shows my hood is closed but it still wont start it still blinks red 5 times

0

Remote Start Only Working from Inside the Car

2018 VW Atlas Push to Start. Car will only start when Fon is in the car.

0

Golf R 2016 MT would not start

Installed Fortin Evo All to avoid crank walk on cold startups, wired up with VW T-Harness and decrypted adaptor successfully done the damn car won't start pressing 3 times the unlock button of the OEM key. Wires everything per Guide # 102981 for Manual 2016 US spec Golf R, got EVO-VWT1 harness. I tried 64.06 and 64.09 firmware and also dipined D2 to D1 since it only came with yellow/blue and not yellow/green wire. I attach a YouTube video trying to start the car 2 times; https://youtu.be/rJT-YGqDOcA Does A1 have to be connected to A16?

0

Golf R 2016 MT would not start

Installed Fortin Evo All to avoid crank walk on cold startups, wired up with VW T-Harness and decrypted adaptor successfully done the damn car won't start pressing 3 times the unlock button of the OEM key. Wires everything per Guide # 102981 for Manual 2016 US spec Golf R, got EVO-VWT1 harness. I tried 64.06 and 64.09 firmware and also dipined D2 to D1 since it only came with yellow/blue and not yellow/green wire. I attach a YouTube video trying to start the car 2 times; https://youtu.be/rJT-YGqDOcA Does A1 have to be connected to A16?

0

Evo one dosn‘t run

My Evo one dosn't run an momently. When i reset the dcryptor key found. send data via pc to Evo one. bit my car says "key Not found". when i start with key in the vehicle no Problem. Outdoor not run.

0

evostart 2 not starting with app

hi, installed a evo one with a evostart2 car start with 3x lock. installed evostart with rfa2a ignition wire ok have power on red wire and ground on black programmed evostart several time but still doesnt work made master reset and reprogrammed still same problem. perform validation step on page 15 of the guide ignition came on and door unlocked and ignition turned off. retried still no start with app.car start with 3x lock.im in the red coverage zone and my personal car which has evostart works fine.so coverage shouldnt be an issue except if its not the same between evostart and evostart2. evostart demand firmware 1.21 minimum i have 1.25 could it be the cause or maybe something else im pretty much lost at this time since every time i programmed i got the flashing blue then the green led. like it should tried programming with the switch and the brake pedal which seemed to have work but no luck.

18/01/2021