Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

1

How can I have the EVO All RFK942 RF Kit maintain program for more than 24hrs?

2018 Toyota Rav 4 Push Start Ignition. Start X Remote Starter. EVO all RFK942 I programmed the RK Kit, but after 24hrs it drops the program. I have to keep programming the RF kit just to work again. maybe my sequence to program was not proper due to can’t find the best program instructions for a push start ignition. Please help. Thanks.

1

New registration of a RF-442 kit on an installed EVO-ONE with THAR-TOY8 kit

I have followed the intruction to the letter, but the problem i run into is that to set the remote programming mode, you have to press the antenna button 5 times, hit the brake, then use a programmed remote to click the lock button (mode 1)... but I don't have a programmed remote, because it's a new install. How am I supposed to use a programmed remote to enter remote program mode when I have brand new remotes that need programmed? I have the EVO-ONE programmed to use the antenna remote, and it is also flashed to use the OEM remote, which is working perfectly. I just want the extended range because the OEM range is NO bueno BAD. Vehicle is 2018 Toyota Corolla LE with H-key

1

New registration of a RF-442 kit on an installed EVO-ONE with THAR-TOY8 kit

I have followed the intruction to the letter, but the problem i run into is that to set the remote programming mode, you have to press the antenna button 5 times, hit the brake, then use a programmed remote to click the lock button (mode 1)... but I don't have a programmed remote, because it's a new install. How am I supposed to use a programmed remote to enter remote program mode when I have brand new remotes that need programmed? I have the EVO-ONE programmed to use the antenna remote, and it is also flashed to use the OEM remote, which is working perfectly. I just want the extended range because the OEM range is NO bueno BAD. Vehicle is 2018 Toyota Corolla LE with H-key

0

1-way RF kit with 2 4-button remotes very short range

RF kit 441 was programmed on Camry 2020. It was successful, but it is very short range, only 25 meters. What is the reason?

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

0

1-way RF kit with 2 4-button remotes.

One All was installed well on camey 2020 , but the long range remote tried to program it and it was not programmed. Is it necessary to connect the cable in the attached picture

1-way RF kit with 2 4-button remotes.

https://photos.app.goo.gl/JRRxv1NiZcJb6nNY9

0

RFK442 not programming with Evo One for a 2009 RAV4 using HAR-ONE- TOY1 harness

I have programmed and installed an Evo-One using THAR-ONE- TOY1 harness in my 2009 Toyota RAV4, automatic transmission, standard key (dot key). Module S/N: 002B04211739, https://photos.app.goo.gl/gBSQdCrRweH1cRnC7   Bypass Firmware: 79.49, https://photos.app.goo.gl/PbEQgYMP1RPx6PgA8 Remote starter firmware: 1.25, https://photos.app.goo.gl/DkLyv2ttWCip77wS7   I have double checked the wiring connections, and seems everything is good.   Image 1: https://photos.app.goo.gl/uPvX8uTQnyqcuEyU9, Image 2: https://photos.app.goo.gl/TH6jQ8A2BPpa6H7P9 I can start the car remotely using the OEM keys. I would like to use the RFK442. I have tried to programming/pairing the RFK442, unfortunately I could not able to proceed after steps 3, page 2 in the following RFK442 programming manual.    https://fortin.ca/download/68451/rfk442-install-guide-68451.pdf The problem is: at step 3, the antena LED blinks once and then goes away (but the instruction says "The LED will turn ON").  At step 4, when I press the brake paddle 4 times, the antena LED doesn't response or no rapid flashing (instruction says "The LED will flash rapidly"). It seems like the RFK442 can not communicate with the Evo One.  I appreciate if you have any suggestion to overcome this issue and complete programming the RFK442 with the Evo One.  

0

RFK442 not programming with Evo One for a 2009 RAV4 using HAR-ONE- TOY1 harness

I have programmed and installed an Evo-One using THAR-ONE- TOY1 harness in my 2009 Toyota RAV4, automatic transmission, standard key (dot key). Module S/N: 002B04211739, https://photos.app.goo.gl/gBSQdCrRweH1cRnC7   Bypass Firmware: 79.49, https://photos.app.goo.gl/PbEQgYMP1RPx6PgA8 Remote starter firmware: 1.25, https://photos.app.goo.gl/DkLyv2ttWCip77wS7   I have double checked the wiring connections, and seems everything is good.   Image 1: https://photos.app.goo.gl/uPvX8uTQnyqcuEyU9, Image 2: https://photos.app.goo.gl/TH6jQ8A2BPpa6H7P9 I can start the car remotely using the OEM keys. I would like to use the RFK442. I have tried to programming/pairing the RFK442, unfortunately I could not able to proceed after steps 3, page 2 in the following RFK442 programming manual.    https://fortin.ca/download/68451/rfk442-install-guide-68451.pdf The problem is: at step 3, the antena LED blinks once and then goes away (but the instruction says "The LED will turn ON").  At step 4, when I press the brake paddle 4 times, the antena LED doesn't response or no rapid flashing (instruction says "The LED will flash rapidly"). It seems like the RFK442 can not communicate with the Evo One.  I appreciate if you have any suggestion to overcome this issue and complete programming the RFK442 with the Evo One.  

0

My test result feed back for Jesus

I tried reply Jesus at my last question, but it won't go through. so I started here.

Hi Jesus,

I did the one TPMS wire cut when car started with the key as you said. The "low fuel level warning light" came on as soon as I cut the wire.

Now it is clear In my case seems like the two TPMS wires is not connected inside EVO ONE when remote started the car,

So, what is next step?

 

0

RF KIT Comptibility.

How do I know which RF KIT is compatible with my Toyota Camry 2014 G-KEY. (EVO-ONE)

0

No horn chirp evo one 442 rf kit with a 2017 Tacoma H key ?

Everything works great on this evo one 442 kit, the rf remotes give an audible signal at lock, unlock, and start, and it works very well...but there is no audible horn chirp from the Tacoma at all, just the normal flashing parking lights , but no horn chirp. Is there a setting I'm missing on the bypass or remote side ?

0

12 Avalon PTS How does fob takeover work? RFK411 work?

I'd like to put an EVO-ONE in my '12 Toyota Avalon. If I install it with the RFK411 (I assume correct kit?) how does the take over from remote start fob to factory fob work? Does the car start then shut off when I open the door...then I restart to drive off? If that RF kit isn't correct which one do I need? Directions didn't seem to include PTS vehicles.

0

HOW TO CONNECT Compustar Prime G6 1 WITH EVO ONE IN 2007 CAMARY

HOW TO CONNECT Compustar Prime G6 1 WITH EVO -ONE AND PLZ SEND ME WIRING DIAGRAM

0

Does 2012 Toyota Avalon PTS use 3X lock or need RF kit?

I normally use a Crimestopper RS4-G5 with EVO-ALL but this Avalon has the intelligent key with PTS. Will it use 3X lock or will I need to buy an RF kit? Not really wanting to carry two fobs.