Questions & Answers

Login to reply View 2 answer(s)

29/09/2020

Other Raymond Yim (300Pts.)

0

EVO-ALL + FT-D100+Compustar RF kit

I installed a few different car using EVO-ALL + FT-D100 + compustar RF kit which is working good until car battery is dead or replace. Factory 3x still working but compustar remote is not woking anymore. I need to reprogram compustar remote then working again. All FT-D100 is update firmware before I installed. That problem is not only one car, it seen all car same issue. Any idea? Thanks.

Login to reply View 1 answer(s)

28/11/2018

Ford zachary jeffrey (130Pts.)

0

T9 not programming though Ft-D100 with EVO-ALL

I have a EVO-ALL installed in a 2014 ford focus hatchback with a key start, and i'm trying to add a compustar T9 rf kit to it. I have installed the FT-D100 (switching the blue and white wire before pluging into the unit) to go between the two and flashed the correct firmware for the unit. When I replug the 4 pin connector and go into the programing mode the lights do not flash. I do get all lights on when in the programing mode but it does not seem to see the remotes.

Login to reply View 3 answer(s)

19/11/2019

Nissan HARPREET SINGH DHILLON (670Pts.)

0

I have four pin compustar rf kit so still I need ft-d100 converter for evo all or I can use only four pin wire

I am going to use standlealone regular installation

Login to reply View 1 answer(s)

27/08/2019

Toyota paolo fast (820Pts.)

0

Evo all without ft-d100

Hello, latest compustar rf.kit listed on your website are equipped with the new antennas with built in decode, i bought a conpustar rf kit but the ft-d100 is not needed (like in the evo-one) i can connect directly the antenna to the blue plug of the t harnesses, btw i cannot select in the menu options of the evoall the firstech option in the rf kit tab (in evo one i can do it). Can u implement this function with the evo all? Thanks

Login to reply View 1 answer(s)

28/11/2018

Ford zachary jeffrey (130Pts.)

0

T9 not programming though Ft-D100 with EVO-ALL

I have a EVO-ALL installed in a 2014 ford focus hatchback with a key start, and i'm trying to add a compustar T9 rf kit to it. I have installed the FT-D100 (switching the blue and white wire before pluging into the unit) to go between the two and flashed the correct firmware for the unit. When I replug the 4 pin connector and go into the programing mode the lights do not flash. I do get all lights on when in the programing mode but it does not seem to see the remotes.

Login to reply View 3 answer(s)

11/12/2015

RF-Kits Noah Maas (250Pts.)

1

EVO-ALL + FT-D100 w/ 2 WAY COMPUSTAR- Lock doesn't work

I succesfully paired the Compustar G9 2-Way antenna via the FT-D100 RF decoder but locking does not function on the Compustar remote. I get a success chirp / green flash on the fob and I can see the EVO-ALL recieving the command but it never actually locks. Unlock & Remote start work perfectly. I have tried swapping the blue/white on the data link back to see if it is a communication error as well. Is there something I need to enable on the EVO-ALL aside from the FT-D100 RF option? Another weird note. I couldn't get 2 way notification to work until I unplugged the canbus and plugged it back in after programming. Prior to that the Compustar remote was only working as a 1 way.

Login to reply View 2 answer(s)

22/08/2019

RF-Kits paolo fast (820Pts.)

0

ft-d100 + RF-AR2WT10-SS + evo-all

Hello, just bought this kit. I have paired succesfully but i have not 2way trasmission, only 1way. Any ideas? Thanks!

Login to reply View 1 answer(s)

28/11/2018

Ford zachary jeffrey (130Pts.)

0

T9 not programming though Ft-D100 with EVO-ALL

I have a EVO-ALL installed in a 2014 ford focus hatchback with a key start, and i'm trying to add a compustar T9 rf kit to it. I have installed the FT-D100 (switching the blue and white wire before pluging into the unit) to go between the two and flashed the correct firmware for the unit. When I replug the 4 pin connector and go into the programing mode the lights do not flash. I do get all lights on when in the programing mode but it does not seem to see the remotes.

Login to reply View 3 answer(s)

03/10/2017

GMC Martin Berube (280Pts.)

0

How to add RF-2WT10-SS to evo-gm3 with FT-D100 RF decoder

How to add RF-2WT10-SS to evo-gm3 with FT-D100 RF. wihch wire do i plug from the eve-gm3 in to the FT-D100 in the sucket with plugs side byside with 2 pin and 4 pin or 4 pin and 6 pin they are same plugs on evo-gm3 and the compustar.

Thanks

Login to reply View 2 answer(s)

11/12/2015

RF-Kits Noah Maas (250Pts.)

1

EVO-ALL + FT-D100 w/ 2 WAY COMPUSTAR- Lock doesn't work

I succesfully paired the Compustar G9 2-Way antenna via the FT-D100 RF decoder but locking does not function on the Compustar remote. I get a success chirp / green flash on the fob and I can see the EVO-ALL recieving the command but it never actually locks. Unlock & Remote start work perfectly. I have tried swapping the blue/white on the data link back to see if it is a communication error as well. Is there something I need to enable on the EVO-ALL aside from the FT-D100 RF option? Another weird note. I couldn't get 2 way notification to work until I unplugged the canbus and plugged it back in after programming. Prior to that the Compustar remote was only working as a 1 way.

Login to reply View 2 answer(s)

07/02/2015

Ford luigi (240Pts.)

0

evo all & compustar 2 way g9 rf kit+ft-d100 decoder

it works but it does not communicate back to the remote after start, is there some setting that needs to be change on the evo all? I've read that two way communication works with the evo one, its the evo all not capable of using this feature because the ft-d100 adapter impedes this?

Login to reply View 1 answer(s)

10/12/2014

RF-Kits haroon tariq (260Pts.)

0

ftd-100 is required?

ftd-100 is required? what if the antenna is a 4 pin, would the evo-one be directly compatible with that? instructions says to change the order of the wires around on the connector.

evo-one