Your Cart

Your shopping cart is empty.

Your shopping cart is empty.

Continue Shopping

QUICK VEHICLE FINDER

VEHICLE FINDER

Questions & Answers

Browse among the most frequent and popular questions and find accurate answers.

recent questions tagged: ...

picto contact

Looking of our top participants?

See users
picto contact

Couldn’t find what you were looking for?

Ask us a question

06/10/2020

Kia Gdrover (400Pts.)

0

2010 Kia Rondo Remote Evo One will not power on

2010 Kia Rondo Standard Key start Evo One, Firmware updated to 76.58 T-Harness THAR-ONE-KHY1 Rermote RF642W, All wiring confirmed correct per Instalation Guide 60981 Rev 20171108, Module confirmed to be programed correctly with Rapidly flashing Yellow LED. All door locks operate correct, they lock and unlock with remote. WhenRemote start sequence is intiated with remote the doos lock but no blue yellow or red light will turn on.Accessories and ignition will not activate and the engine does not crank. The blue light on the antenna flashes rapidly and there is a red light visable behind the Auto trans wire loop which is cut for automatic trans mode. The park lights only flash when locking and unlocking the doors. The hood switch is confirmed to only be grounded with the hood open and not grounded when hood is closed.

0

How do I hardwire the brake for EVO-ONE in a 2010 Hyundai Accent (Guide #60801)?

  Have additional questions regarding answer (by Derek) to original question; both posted below for clarity...   1.  Had already tried reversing the can bus wires (no effect) and the option 20.2 in the remote starter was already set by default.  What would 20.n be if it was not 20.2?   2.  Do all default settings assume I have PATS data wires?   3.  How do I hardwire the brake?  The only place brake is mentoned in the #60801 guide is in "Vehicle functions supported in this diagram..." at the top of page 1.   4.  I also purchased the two way RF system (haven't tried to hook up yet obviously).  Will hardwiring the brake and/or setting option 20.2 affect the function of that system, particularly the feedback that tells you the car is running?   5.  Answer below said: "By doing this you will skip the need to even program it on the blue light."  Does this mean no programming at all is required?  Should just start?  Key is bypassed?   6.  If the above doesn't work, is it time to send everything back?   BTW, I don't care about alarm.  Just want remote start.   Thanks, Mike   ----------------------   ANSWER TO ORIGINAL QUESTION   That is a typo in the troubleshooting guide. As the website states it is indeed a KHY1. I have corrected it.   You can try flipping the can bus wires see if that works. If it refuses to program I suggest the following.   Since you only get tach and frootbrake from the can bus, as long as your car is automatic transmission:   -Set option 20.2 in the remote starter   -Hardwire the brake.   By doing this you will skip the need to even program it on the blue light.   ----------------------   ORIGINAL QUESTION   Having trouble programming a EVO-ONE for my 2010 Hundai Accent.  It has the thar-one-khy1 T-harness.  Before programming I loaded the latest firm ware; 76.[54] for bypass and 1.[24] for remote starter.  I loaded the suggested options for both and made sure the remote starter setting from the install guide (2.2 and 32.5) were correct.  The car does not have the PATS data wires (no imobilizer).  I used guide #60801 to install and programming method 2.  The blue light does not flash in step 4.  Just goes out and will come back on when the key is returned to off.   I used the troubleshooting guide associated with the #60801 installation guide on the flash link manager (says it is for thar-one-khy2 T-harness).  The wiring is correct and have verified continuity.  Voltages on the CAN wires are roughly 2.35 and 2.65.   Crutchfield sent me a second one when the first wouldn't work in case thre was something wrong with the unit.  Got the same results with both.  Oh, and I did cut the yellow loop for the automatic transmission.  Are there any bypass/remote starter options that I might change - or anyhing else for that matter - that might get this thing working or is it just not going to work on my car?

----------------------

0

Trouble programming a EVO-ONE for 2010 Hyundai Accent

Having trouble programming a EVO-ONE for my 2010 Hundai Accent. It has the thar-one-khy1 T-harness. Before programming I loaded the latest firm ware; 76.[54] for bypass and 1.[24] for remote starter. I loaded the suggested options for both and made sure the remote starter setting from teh install guide (2.2 and 32.5) were correct. The car does not have the PATS data wires (no imobilizer). I used guide #60801 to install and programming method 2. The blue light does not flash in step 4. Just goes out and will come back on when the key is returned to off. I used the troubleshooting guide associated with the #60801 installation guide on the flash link manager (says it is for thar-one-khy2 T-harness). The wiring is correct and have verified continuity. Voltages on the CAN wires are roughly 2.35 and 2.65. Crutchfield sent me a second one when the first wouldn't work in case thre was something wrong with the unit. Got the same results with both. Oh, and I did cut the yellow loop for the automatic transmission. Are there any bypass/remote starter options that I might change - or anyhing else for that matter - that might get this thing working or is it just not going to work on my car?

0

2012 Kia Rondo Evo One - Car not remote starting, no crank

Hi, I installed a 2012 Kia Rondo Evo One T-harness. After installing everything, programming the module and remotes. After the installation, I noticed I had put the KHY2 instead of the KHY1. The car isnt remote starting, no crank. Im assuming that if I installed the KHY1, it will for sure work considering all my wiring is good. Right? 1- is there a way to modify the KHY2 to make it act as a KHY1? If not, its ok I will just replace with the KHY1. 2- the other wires that come in the box are all similar right? Only the big 6-pin connectors from KHY1/KHY2 are different?

0

2010 Hyundai Sonata - For an EVO-ALL (not EVO-ONE) will T-Harness THAR-ONE-KHY1 be of any use?

Bought an EVO-ALL kit. Just wondering if the THAR-ONE-KHY1 t-harness will help with install, if it's even compatible.

0

THAR-ONE-KHY1 2010 Versacruz install Guide

Could you send me the instalation guide using the THAR-ONE-KHY1 T-Harness and a EVO-ONE for a 2010 Vera cruise Limited Proximity key. The guide shows one avalable for this application but does not show it in the guide.

0

THAR-ONE-KHY1 Install guide

Can I use the T-Harness THAR-ONE-KHY1 for thi application? If yes, is there a installation guide showing that kind of hook up?

This website uses cookies to ensure you get the best user experience. By continuing to browse our site, you are agreeing to our use of cookies. Learn More Continue